West 6010+, 8010+ Specifications

West 6010 & 8010 Panel Indicator

Jumperles

s Configuration

Auto Detected Hardware Up to 4 Alarm Outputs Modbus & ASCII Comms Min/max Value Hold Tare (auto-zero) Function Multi-point Scaling PC configuration

The P6010 and P8010 have multi-point scaling, tare function and improved flexibility. They have a universal input

and are available with a red or green display. Plug-in modules allow up to four alarm relays (latching or non-

latching), PV retransmission or transmitter PSU.

Specification

Features

Output Configuration Up to 4 total. Max 3 single/1 dual relay, max 1 retransmit of PV, max 1 transmitter power supply Alarms Up to 5. Process high low or logical OR (direct or reverse acting). With adjustable hysteresis Viewable Values Process variable, maximum value, minimum value and alarm 1 elapsed time since reset Human Interface 3 button operation, 4 digit 10mm (6010) or 13mm (8010) high red or green display, plus 3 alarm 1

PC Configuration Off-line configuration from PC serial port to dedicated config socket (comms option not required).

max and 1 min indicator

Configuration Software for Windows 98 or higher. West Part Number: PS1-CON

Input

Thermocouple J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%. RTD 3 Wire PT100, 50Ω per lead maximum (balanced) DC Linear 0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V.

Impedance >10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges Accuracy ±0.1% of input range ±1 LSD (T/C CJC better than 1°C) Sampling 4 per second, 14 bit resolution approximately

Outpu

ts & Options

Single Alarm Relays Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations. Latching or non-latching Dual Alarm Relay Two x SPST contacts with shared common. 2 Amp resistive at 240V AC, >200,000 operations.

SSR Driver Outputs Triac Outputs 0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz

DC Linear Retransmit Outputs 0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min.

Transmitter Power Supply Output 24VDC (nominal) into 910Ω minimum to power external devices Serial Communications 2 Wire RS485, 1200 to 19200 Baud, Modbus and ASCII protocol (selectable) Digital Input External reset of latched relay, stored alarm 1 elapsed time, stored min/max PV values or initiate tare

Opera

ting & Environmental

Temperature & RH 0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing Power Supply 100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts) Front Panel Protection IEC IP66 (Behind panel protection is IP20) Standards CE, UL & ULC recognised. Pollution Degree 2, Installation Category II

Scaleable -1999 to 9999, with adjustable decimal point

Latching or non-latching Drive capability >10V DC in 500 minimum

Accuracy ±0.25% at 250Ω (degrades linearly to 0.5% for increasing burden to specified limits)

function. Volt free or TTL input

Ref

DS-Px010-1209-1-EN

Dimensions 6010

8010

48mm

96mm

10mm (approx)

110mm

48mm

10mm (approx)

100mm

48mm

Cut out

45mm +0.5

92mm +0.5

Wiring Connections 6010

Field Reconfiguration

Input

Jumper-free configuration for any type

(no extra parts required)

Option Slot 1 Part Number

Relay Output........................... PO1-C10

Linear mA/V DC Output .......... PO1-C21

SSR Driver Output .................. PO1-C50

Triac Output ............................ PO1-C80

Option Slot 2 Part Number

Relay Output........................... PO2-C10

Dual Relay Output ................. PO2-W09

Linear mA/V DC Output .......... PO2-C21

SSR Driver Output .................. PO2-C50

Triac Output ............................ PO2-C80

Option Slot 3 Part Number

Relay Output........................... PO2-C10

Linear mA/V DC Output .......... PO2-C21

SSR Driver Output .................. PO2-C50

24VDC Transmitter PSU........ PO2-W08

Option Slot A Part Number

Digital Input............................ PA1-W03

RS485 Comms ...................... PA1-W06

Ref

DS-Px010-1209-1-EN

+ 2 hidden pages