Weslo WLTL31312.0 User Manual

www.weslo.com

Model No. WLTL31312.0
Serial No.

Write the serial number in the space
above for future reference.

Serial Number

Decal

QUESTIONS?

If you have questions, or if parts
are damaged or missing, DO NOT

CONTACT THE STORE; please
contact Customer Care.

USER’S MANUAL

IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT

ON THE WEB:
www.wesloservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

256841

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT PRECAUTIONS ..................................................................3

BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

OPERATION AND ADJUSTMENT .............................................................11

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

TROUBLESHOOTING ......................................................................18

EXERCISE GUIDELINES ....................................................................21

PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location(s) of the warn­ing decal(s). If a decal is missing or illegible,

call the telephone number on the front cover
of this manual and request a free replace­ment decal. Apply the decal in the location
shown. Note: The decal(s) may not be shown at

actual size.

WESLO is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read

all important precautions and instructions in this manual and all warnings on your treadmill before
using your treadmill. ICON assumes no responsibility for personal injury or property damage sus­tained by or through the use of this product.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons
with pre-existing health problems.

3. Use the treadmill only as described in this
manual.

4. The treadmill is intended for home use only.
Do not use the treadmill in any commercial,
rental, or institutional setting.

5. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

6. Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.

7. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

8. Keep children under age 12 and pets away
from the treadmill at all times.

9. The treadmill should be used only by per­sons weighing 250 lbs. (113 kg) or less.

10. Never allow more than one person on the
treadmill at a time.

11. Wear appropriate exercise clothes while
using the treadmill. Do not wear loose
clothes that could become caught in the
treadmill. Athletic support clothes are recom­mended for both men and women. Always

wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in
sandals.

12. Plug the power cord into a surge suppressor
(not included), and plug the surge suppres­sor into an appropriate outlet (see page 11).
To avoid overloading the circuit, do not plug
other electrical devices, except for low-power
devices such as cell phone chargers, into
the surge suppressor or into an outlet on the
same circuit.

13. Use only a surge suppressor that meets all of
the specifications described on page 11. To
purchase a surge suppressor, see your local
WESLO dealer, call the telephone number on
the front cover of this manual, or see your
local electronics store.

14. Failure to use a properly functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.

15. Keep the power cord and the surge suppres­sor away from heated surfaces.

16. Never move the walking belt while the power
is turned off. Do not operate the treadmill
if the power cord or plug is damaged, or if
the treadmill is not working properly. (See
TROUBLESHOOTING on page 18 if the tread­mill is not working properly.)

17. Read, understand, and test the emergency
stop procedure before using the treadmill
(see HOW TO TURN ON THE POWER on
page 13).

18. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails or upper body arms while using the
treadmill.

19. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.

3

20. The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is
intended only as an exercise aid in determin­ing heart rate trends in general.

21. Never leave the treadmill unattended while
it is running. Always remove the key, press
the power switch into the off position (see
the drawing on page 5 for the location of the
power switch), and unplug the power cord
when the treadmill is not in use.

22. Do not attempt to move the treadmill until it
is properly assembled. (See ASSEMBLY on
page 7, and HOW TO FOLD AND MOVE THE
TREADMILL on page 17.) You must be able to
safely lift 45 lbs. (20 kg) to move the treadmill.

23. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.

24. Never insert any object into any opening on
the treadmill.

25. Inspect and properly tighten all parts of the
treadmill regularly.

26. DANGER: Always unplug the power

cord immediately after use, before clean­ing the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized ser­vice representative only.

27. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.

SAVE THESE INSTRUCTIONS

4

BEFORE YOU BEGIN

Thank you for selecting the new WESLO®
CROSSWALK 5.2T treadmill. The CROSSWALK 5.2T
treadmill offers a selection of features designed to
make your workouts at home more effective. And
when you’re not exercising, the unique treadmill can
be folded up, requiring less than half the floor space of
other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have questions after

Length: 5 ft. 8 in. (173 cm)
Width: 2 ft. 5 in. (74 cm)

Handrail

reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

Console

Key/Clip

Storage Latch

Walking Belt

Foot Rail

Idler Roller
Adjustment Screws

Motor Hood

Power Switch

Power Cord

Wheel

Platform Cushion

5

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw­ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat-

tached. Extra parts may be included.

M5 Star

Washer (7)–2

M4.2 x 18mm
Screw (58)–2

M8 Star

Washer (5)–6

M4.2 x 19mm
Screw (10)–4

1/4" x 3 1/2" Screw (103)–4

Washer (9)–4

M10 Star

1/4" Flat Washer

(101)–4

M5 x 16mm

Screw (85)–2

M10 Nut (73)–4

M8 x 15mm

Bolt (8)–6

M10 x 58mm Bolt (2)–4

6

ASSEMBLY

• To watch an assembly
video, go to
http://productvideo.co/
assembly/kmart/weslo
or use your mobile
phone or smartphone to
read the QR code at the
right. A reader applica­tion such as ShopSavvy
must be installed on your mobile phone or
smartphone.

• To hire an authorized service technician
to assemble your exercise equipment, call
1-800-445-2480.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materialsuntilyounishallassemblysteps.

1. With the help of a second person, carefully tip
the treadmill onto its side. Unfold the Frame (51)
away from the Uprights (53, 54).

• After shipping, there may be an oily substance
on the exterior of the treadmill. This is normal. If
there is an oily substance on the treadmill, wipe
it off with a soft cloth and a mild, non-abrasive
cleaner.

• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”

• To identify small parts, see page 6.

• Assembly requires the following tools:

the included hex keys

one adjustable wrench

one Phillips screwdriver

needlenose pliers

To avoid damaging parts, do not use power tools.

1

2

54

Orient the Base (52) as shown. Attach the Base

to the Left Upright (53) and the Right Upright
(54) with four M10 x 58mm Bolts (2) and four
M10 Nuts (73). Start all four Nuts, and then

tighten them.

With the help of a second person, carefully tip

the treadmill so that the Base (52) is flat on the
floor.

51

73

52

2

2

53

73

7

2. Set the console assembly face down on a soft
surface to avoid scratching it.

Identify the Right Handrail (33), which has a

large hole in the location shown. Hold the Right
Handrail near the console assembly.

Next, insert the console wire into the large hole

in the side of the Right Handrail (33). Using
needlenose pliers, carefully grasp the connector
and pull the console wire out of the hole near the
bracket on the Right Handrail.

2

Console

Assembly

Console Wire

Bracket

Connector

Large

Hole

33

3. Set the Right Handrail (33) on the console
assembly. Make sure that the console wire is
not pinched. Remove the tie from the bracket
on the Right Handrail. If necessary, press the
Cage Nut (102) back into place.

Start an M5 x 16mm Screw (85) with an M5

Star Washer (7) into the Right Handrail, and
then start two M4.2 x 19mm Screws (10) into
the Right Handrail. Tighten the M5 x 16mm

Screw and then tighten the two M4.2 x 19mm
Screws; do not overtighten the Screws.

Attach the Left Handrail (not shown) to the

console assembly in the same way. Note:

There is no wire on the left side.

3

Assembly

Console

Console Wire

102

Bracket

Wire Tie

85

7

33

10

8

4. With the help of a second person, hold the con­sole assembly near the Right Upright (54).

4

Connect the Wire Harness (39) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON­NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. If there is a wire tie on the Wire

Harness, remove the wire tie. Insert the con­nectors and the excess wire downward into the
Right Upright (54).

5. Set the console assembly on the Uprights (53,

54). Make sure that no wires are pinched.
Start four M8 x 15mm Bolts (8) with four M8 Star
Washers (5) into the Uprights as shown. Do not

tighten the Bolts yet.

Console

Assembly

Console

Wire

39

5

Console

Wire

54

Console Assembly

39

6. Start an M8 x 15mm Bolt (8) with an M8 Star
Washer (5) into each Upright (53, 54). Then,

firmly tighten all six M8 x 15mm Bolts (8).

8

5

54

6

8

5

8

53

8

5

53

8

54

5

8

9