Weslo WLEL45071 Owner's Manual
¨
USERÕS MANUAL
Patent Pending
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. WLEL45071
Serial No.
Serial
Number
Decal
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
please call direct to our toll-free
Customer Hot Line. The trained
technicians on our Customer Hot
Line will provide immediate
assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE WESLO¨ECLIPSE II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
1. Read all instructions in this manual before
using the ECLIPSE II.
2. It is the responsibility of the owner to
ensure that all users of the ECLIPSE II are
adequately informed of all precautions.
3. Place the ECLIPSE II on a level surface, with
a mat beneath it to protect the floor or
carpet. Keep the ECLIPSE II indoors, away
from moisture and dust.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children under the age of 12 and pets
away from the ECLIPSE II at all times.
6. The ECLIPSE II should not be used by
persons weighing more than 250 pounds.
7. Wear appropriate exercise clothing when
using the ECLIPSE II. Always wear athletic
shoes for foot protection.
8. Always hold the handlebars when mounting,
dismounting, and using the ECLIPSE II. Step
onto and off the pedal that is in the lowest
position when mounting and dismounting.
9. When you stop exercising, allow the pedals
to slowly come to a stop.
10. Keep your back straight when using the
ECLIPSE II. Do not arch your back.
11. If you feel pain or dizziness while exercising, stop immediately and begin cooling
down.
12. The ECLIPSE II is intended for in-home use
only. Do not use it in any commercial, rental,
or institutional setting.
13. The decal shown below is found on the
ECLIPSE II. If the decal is missing, or if it is
not legible, call toll-free 1-800-999-3756 to
order a free replacement decal. Apply the
decal in the location shown.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read
all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the WESLO¨ECLIPSE II.
3
BEFORE YOU BEGIN
Congratulations for selecting the revolutionary WESLO
¨
ECLIPSE II elliptical exerciser. The ECLIPSE II is an
incredibly smooth exerciser that moves your feet in a
natural elliptical path, minimizing the impact on your
knees and ankles. And the unique ECLIPSE II features
adjustable resistance and motivational electronics to
help you get the most from your exercise. Welcome to
a whole new world of natural, elliptical-motion exercise
from WESLO.
For your benefit, read this manual carefully before
you use the ECLIPSE II. If you have additional ques-
tions, please call our Customer Service Department
toll-free at 1-800-999-3756, Monday through Friday, 6
a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please note the product model
number and serial number before calling. The model
number is WLEL45071. The serial number can be
found on a decal attached to the ECLIPSE II (see the
front cover of this manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Resistance Knob
Upright
FRONT
BACK
RIGHT SIDE
Pedal
Handlebar
Lock Pin
Extension Tube
Side Shield
Pedal Leg
Base
Console
Water Bottle Holder
(Bottle is not included)
4
PART IDENTIFICATION CHART
Use the chart below to identify the small parts used in
assembly. The number in parenthesis below each part
is the key number of the part, from the PART LIST on
page 14. The number after the dash indicates the
quantity needed for assembly. Note: Some small
parts may have been pre-attached for shipping. If
a part is not in the parts bag, check to see if it has
been pre-attached.
M10 Nylon Locknut (54)Ñ8
5/8Ó Axle Cap (43)Ñ2
1/2" Nylon Locknut (9)Ñ2
Pedal Bolt (8)Ñ2
Bushing (39)Ñ8
Handlebar Spacer (46)Ñ2
M10 x 75mm Carriage Bolt (66)Ð4
M10 x 68mm Bolt (67)Ð4
M4 x 12mm Screw (28)Ñ2
M4 x 16mm Screw (42)Ñ7
M4 x 18mm Screw (69)Ñ4
5
1. Hold one of the Stabilizers (68) against the saddle on
the front of the Base (1). Make sure that the Stabilizer
is turned so the square holes are facing away from the
saddle. Attach the Stabilizer with two M10 x 75mm
Carriage Bolts (66) and two M10 Nylon Locknuts (54).
Attach the other Stabilizer to the saddle on the back of
the Base (not shown).
2. While another person holds the Upright (2), gently
pull the Extension Wire (49) and the Resistance
Cable (33) up through the Upright until there is no
slack between the Upright and the Base (1).
Insert the four M10 x 68mm Bolts (67) up through the
Base (1). Slide the Upright (2) onto the Bolts. Be
careful to avoid pinching the Extension Wire (49)
and the Resistance Cable (33). Tighten an M10
Nylon Locknut (54) onto each Bolt.
ASSEMBLY
Assembly requires two persons. Place all parts of the WESLO¨ECLIPSE II in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires a phillips screwdriver , two adjustable wrenches , and a
rubber mallet .
2
1
54
49
2
66
54
1
68
1
33
67
3
3. Identify the Left Handlebar (6) and the Left Pedal Leg
(3) (there are stickers on the Handlebars and Pedal
Legs for identification).
Slide the Left Handlebar (6) onto the left Extension
Tube (5). Press the Handlebar Bushing (45) up into
the Left Handlebar. Align one of the three holes in the
Left Handlebar with the hole in the Extension Tube.
Insert the Left Lock Pin (37) into the holes, make sure
the Left Lock Pin is in the position shown in drawing
3a, and attach a Spring Clip (38) to the Left Lock Pin.
Attach a Pedal (29) to the Left Pedal Leg (3) with
three M4 x 16mm Screws (42).
Repeat this step to attach the Right Handlebar, right
Extension Tube, and Right Pedal Leg (not shown).
3a
6
6
37
29
3
42
45
5
37
38
Loading...