Weslo WLEL45070 User Manual

USERÕS MANUAL

Patent Pending

CAUTION

Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

Model No. WLEL45070 Serial No.

Serial

Number

Decal

QUESTIONS?

If you have questions, or if there are missing or damaged parts, please call direct to our toll-free Customer Hot Line. The trained technicians on our Customer Hot Line will provide immediate assistance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO USE THE WESLO¨ECLIPSE II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

1. Read all instructions in this manual before using the ECLIPSE II.

2. It is the responsibility of the owner to ensure that all users of the ECLIPSE II are adequately informed of all precautions.

3. Place the ECLIPSE II on a level surface, with a mat beneath it to protect the floor or carpet. Keep the ECLIPSE II indoors, away from moisture and dust.

4. Inspect and tighten all parts regularly. Replace any worn parts immediately.

5. Keep children under the age of 12 and pets away from the ECLIPSE II at all times.

6. The ECLIPSE II should not be used by persons weighing more than 250 pounds.

7. Wear appropriate exercise clothing when using the ECLIPSE II. Always wear athletic shoes for foot protection.

8. Always hold the handlebars when mounting, dismounting, and using the ECLIPSE II. Step onto and off the pedal that is in the lowest position when mounting and dismounting.

9. When you stop exercising, allow the pedals to slowly come to a stop.

10. Keep your back straight when using the ECLIPSE II. Do not arch your back.

11. If you feel pain or dizziness while exercising, stop immediately and begin cooling down.

12. The ECLIPSE II is intended for in-home use only. Do not use it in any commercial, rental, or institutional setting.

13. The decal shown below is found on the ECLIPSE II. If the decal is missing, or if it is not legible, call toll-free 1-800-999-3756 to order a free replacement decal. Apply the decal in the location shown.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the WESLO¨ECLIPSE II.

BEFORE YOU BEGIN

Congratulations for selecting the revolutionary WESLO¨ECLIPSE II elliptical exerciser. The ECLIPSE II is an incredibly smooth exerciser that moves your feet in a natural elliptical path, minimizing the impact on your knees and ankles. And the unique ECLIPSE II features adjustable resistance and motivational electronics to help you get the most from your exercise. Welcome to a whole new world of natural, elliptical-motion exercise from WESLO.

For your benefit, read this manual carefully before you use the ECLIPSE II. If you have additional ques-

tions, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is WLEL45070. The serial number can be found on a decal attached to the ECLIPSE II (see the front cover of this manual for the location of the decal).

Before reading further, please look at the drawing below and familiarize yourself with the parts that are labeled.

Resistance Knob

Upright

FRONT

BACK

RIGHT SIDE

Pedal

Handlebar

Lock Pin

Extension Tube

Side Shield

Pedal Leg

Base

Console

Water Bottle Holder (Bottle is not included)

PART IDENTIFICATION CHART

Use the chart below to identify the small parts used in assembly. The number in parenthesis below each part is the key number of the part, from the PART LIST on

page 14. The number after the dash indicates the quantity needed for assembly.

3/8" Nylon Locknut (54)Ñ4

5/8Ó Axle Cap (45)Ñ2

#8 x 3/4" Tec Screw (42)Ñ1*

Handlebar Bushing (40)Ñ4*

1/2" Nylon Jam Nut (9)Ñ2

Crank Spacer (41)Ñ2

Pedal Bolt (8)Ñ2

Pedal Leg Bushing (39)Ñ4*

Handlebar Spacer (46)Ñ2

*Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

2. Identify the Left Handlebar (6) and the left Extension Tube (5) (there are stickers on the Handlebars and Extension Tubes for identification). Make sure that there is a Tree Fastener (63) in the Extension Tube. If there is not, insert a Tree Fastener as shown.

Slide the Left Handlebar (6) onto the left Extension Tube (5), being careful not to damage the Tree Fastener (63). Align one of the three holes in the Left Handlebar with the hole in the Extension Tube and insert a Lock Pin (37) into the holes. Turn the Lock Pin to the position shown in drawing 2a.

Repeat this step to attach the Right Handlebar to the right Extension Tube (not shown).

ASSEMBLY

Assembly requires two persons. Place all parts of the WESLO¨ECLIPSE II in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included grease packet, a phillips screwdriver , two adjustable wrenches , and a rubber mallet .

1. Remove the #8 x 3/4Ó Tec Screw (42) from the Cable Cover (53). While another person holds the Upright (2) near the Base (1), carefully pull the Resistance Cable (33) up through the Upright until there is no slack between the Upright and the Base.

Next, insert the Extension Wire (49) into the Base (1) until there is no slack between the Upright and the Base.

Slide the Upright (2) onto the welded bolts on the Base (1). Be careful to avoid pinching the

Extension Wire (49) and the Resistance Cable (33). Tighten a 3/8Ó Nylon Locknut (54) onto each

welded bolt.

Insert the upper end of the Resistance Cable (33) into the Upright (2) as shown. Insert the tab on the Cable Cover (53) into the slot in the Upright. Attach the Cable Cover to the Upright with the #8 x 3/4Ó Tec Screw (42).

Slot

+ 11 hidden pages