Weslo WLEL3260.8 Owner's Manual
Visit our website at
www.weslo.com
new products, prizes,
fitness tips, and much more!
Model No. WLEL32608.0
Serial No.
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if parts are damaged or missing,
PLEASE DO NOT CONTACT THE
STORE; please contact Customer
Care.
USER'S MANUAL
IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:
CALL TOLL-FREE:
1-866-699-3756
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual for future reference.
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
M
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the
warning decal(s). If a decal is missing or
illegible, call the telephone number on
the front cover of this manual and
request a free replacement decal. Apply
the decal in the location shown. Note: The
decal(s) may not be shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
nstructions in this manual and all warnings on your elliptical exerciser before using your elliptical
i
exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
3. Your elliptical exerciser is intended for home
use only. Do not use your elliptical exerciser
in a commercial, rental, or institutional setting.
4. Keep your elliptical exerciser indoors, away
from moisture and dust. Place your elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around your elliptical exerciser to mount,
dismount, and use it.
5. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from your elliptical exerciser at all times.
7. Your elliptical exerciser should not be used
by persons weighing more than 250 lbs.
(113 kg).
8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your elliptical exerciser. Always wear athletic shoes for foot
protection.
9. Hold the handgrip pulse sensor or the upper
body arms when mounting, dismounting, or
using your elliptical exerciser.
10. Keep your back straight while using your
elliptical exerciser; do not arch your back.
11. The pulse sensor is not a medical device.
Various factors, including the userʼs movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
12. When you stop exercising, allow the pedals
to slowly come to a stop.
13. If you feel pain or dizziness while exercising,
stop immediately and cool down.
14. Use your elliptical exerciser only as
described in this manual.
3
BEFORE YOU BEGIN
hank you for selecting the new WESLO
T
TUM CT 5.8 elliptical exerciser. The MOMENTUM CT
5.8 is an incredibly smooth exerciser that moves your
feet in a natural elliptical path, minimizing the impact
n your knees and ankles. Welcome to a whole new
o
world of natural, elliptical-motion exercise.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
®
OMEN-
M
Pulse Sensor
Console
roduct model number and serial number before con-
p
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.
To avoid a registration fee for any service needed
under warranty, you must register the elliptical
exerciser at www.wesloservice.com/registration.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Upper Body Arm
Shield
Pedal Disc
Water Bottle Holder*
Wheel
Leveling Foot
Pedal
*Water bottle is not included
4
M8 Split
Washer (79)–4
M8 Washer
(64)–4
M10 Split
Washer (78)–4
M4 x 16mm
Screw (60)–4
M8 x 25mm Patch
Screw (70)–2
M8 x 19mm Patch
Screw (73)–4
M8 Locknut
(59)–10
M10 Locknut
(84)–4
M8 x 23mm Button
Screw (65)–4
Large Wave
Washer (20)–4
Wave Washer
(27)–2
M4 x 19mm
Screw (68)–6
M8 Large
Washer (81)–2
Star Washer
(85)–6
M10 x 76mm Button Bolt (74)–2
M10 x 60mm Button Screw (67)–2
M10 x 75mm Carriage Bolt (58)–2
M4 x 22mm
Screw (66)–2
M8 x 45mm Button
Bolt (11)–4
M8 x 38mm Button
Bolt (94)–4
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included tools, assembly requires a Phillips screwdriver , an adjustable
wrench , and a rubber mallet .
See the drawings below to identify the small parts needed for assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
5
1.
o make assembly easier, read the
T
information on page 5 before you begin
assembling the elliptical exerciser.
ttach the Rear Stabilizer (35) to the Frame (1) with
A
two M10 x 75mm Carriage Bolts (58) and two M10
Locknuts (84).
1
Press the Stabilizer Caps (36) onto the Rear
Stabilizer (35) as shown.
2. See the inset drawing. Orient a Wheel (28) so that
the four posts face away from the Front Stabilizer
(3).
Attach the Wheel (28) to the Front Stabilizer (3)
with an M8 Locknut (59). Next, press a Wheel
Cover (29) onto the posts on the Wheel.
Attach the other Wheel (not shown) in the same
way.
58
36
1
35
36
84
2
28
Posts
3. Attach the Front Stabilizer (3) to the Frame (1) with
two M10 x 76mm Button Bolts (74), two M10 Split
Washers (78), two Concave Spacers (13), and two
M10 Locknuts (84). Do not tighten the Locknuts
yet.
Insert two M10 x 60mm Button Screws (67) with
two M10 Split Washers (78) and two Concave
Spacers (13) through the Front Stabilizer (3) and
into the Frame (1).
Tighten the M10 Locknuts (84), and then tighten
the M10 x 60mm Button Screws (67).
78
13
84
3
74
78
13
1
13
78
67
29
59
3
3
28
13
78
67
6
4. While another person holds the Upright (2) near the
Frame (1), connect the Upper Wire Harness (18) to
he Lower Wire Harness (38).
t
ip: Avoid pinching the Wire Harnesses (18, 38).
T
Carefully slide the Upright (2) onto the Frame (1).
Attach the Upright with four M8 x 19mm Patch
Screws (73) and four M8 Split Washers (79). Do
ot tighten the Patch Screws yet.
n
4
Avoid pinching the
Wire Harnesses (18, 38)
5. Identify the Left Pedal Arm (21), which is marked
with a “Left” sticker. Attach a Pedal (19) to the Left
Pedal Arm with three M4 x 19mm Screws (68) and
three Star Washers (85).
Attach the other Pedal (not shown) to the Right
Pedal Arm (not shown) in the same way.
38
79
73
79
73
1
19
2
79
73
18
5
21
85
85
68
7
6. Apply a generous amount of the included grease to
he Pivot Axle (16) and to two Wave Washers (27).
t
Identify the Left and Right Upper Body Legs (6, 7),
which are marked with “Left” and “Right” stickers.
While another person aligns the Left and Right Upper
ody Legs (6, 7) with the Upright (2) as shown, insert
B
the Pivot Axle (16) through the Upper Body Legs and
the Upright. Tip: Avoid damaging the Upper Wire
Harness (18) with the Pivot Axle.
6
Hexagonal
Holes
Grease
27
18
2
Grease
7
27
6
1
Slide a Wave Washer (27) onto each end of the Pivot
Axle (16). Make sure that the Wave Washers
remain on the ends of the Pivot Axle.
7. Tighten an M8 x 23mm Button Screw (65), an M8
Washer (64) and a Pivot Cover (14) into each end
of the Pivot Axle (16).
6
7
2
Avoid damaging
the Upper Wire
Harness (18)
65
14
64
16
64
7
14
65
6
8
Loading...