Weslo WLEL1405.2 Owner's Manual

Model No. WLEL1405.2

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.

USER’S MANUAL

CALL TOLL-FREE:

1-866-699-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

ON THE WEB:
www.wesloservice.com

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Keep this manu
al for future reference.

-

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

M

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

IMPORTANT PRECAUTIONS

WARNING:To reduce the risk of serious injury, read the following important precau-

tions before using the elliptical exerciser.

1. Read all instructions in this manual and all
warnings on the elliptical exerciser before
using the elliptical exerciser.

2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.

3. The elliptical exerciser is intended for
home use only. Do not use the elliptical
exerciser in a commercial, rental, or institu­tional setting.

4.

Keep the elliptical exerciser indoors, away
from moisture and dust. Place the elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around the elliptical exerciser to mount, dis­mount, and use it.

5. Inspect and properly tighten all parts regu-

. Replace any worn parts immediately

larly

6. Keep children under 12 and pets away from
the elliptical exerciser at all times.

7. The elliptical exerciser should not be used
by persons weighing more than 250 pounds.

.

8. Wear appropriate exercise clothes when
using the elliptical exerciser. Always wear
athletic shoes for foot protection while exer­cising.

9. Hold the handlebars when mounting, dis­mounting, or using the elliptical exerciser.

10. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin­ing heart rate trends in general.

11. Keep your back straight when using the ellip­tical exerciser; do not arch your back.

12. If you feel pain or dizziness while exercising,
stop immediately and cool down.

13. When you stop exercising, allow the pedals
to slowly come to a stop.

14. The decal shown on page 3 has been placed
on the elliptical exerciser. If a decal is miss­ing or illegible, call the toll-free telephone
number on the front cover of this manual
and order a free replacement decal. Apply
the decal in the location shown.

WARNING:Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob­lems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.

2

BEFORE YOU BEGIN

Congratulations for selecting the new WESLO

OMENTUM 610 elliptical exerciser. The MOMEN-

M
TUM 610 elliptical exerciser offers a selection of fea­tures designed to make your workouts at home more
effective and enjoyable.

For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-

tions after reading this manual, see the front cover of
this manual. To help us assist you, please note the
product model number and serial number before call-

®

ing. The model number is WLEL1405.2. The serial

umber can be found on a decal attached to the ellip-

n
tical exerciser (see the front cover of this manual for
the location of the decal).

To avoid a registration fee for any service needed
under warranty, you must register the elliptical
exerciser at www.wesloservice.com/registration.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Handlebar

Water Bottle Holder*

Console

Resistance Knob

BACK

Pedal Disk

FRONT

Pedal Arm

Pedal

*No water bottle is included

3

ASSEMBLY

M4 x 12mm

Screw (43)–5

M10

Washer (35)–2

M10 Split

Washer (59)–2

M10 Nylon

Locknut (33)–6

Pedal Arm Bolt Set (40)–2

M6 Nylon

Locknut (27)–4

M10 x 25mm

Patch Screw (22)–2

M10 x 73mm Carriage Bolt (34)–4M10 x 68mm Button Bolt (48)–2

M6 x 36mm Button Bolt (50)–4

M6 x 48mm Flat Head

Screw (36)–4

Wave Washer

(64)–2

o hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

T

ssembly requires two persons.Place all parts of the elliptical exerciser in a cleared area and remove the

A
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included allen wrenches, assembly requires a Phillips screwdriver , an adjustable
wrench , and a rubber mallet .

As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on page 14. The number following the
parentheses is the quantity needed for assembly.

part is not in the parts bag, check to see if it has been pre-assembled.

Note: Some small parts may have been pre-assembled. If a

1. Identify the Front Stabilizer (10), which is narrower than
the Rear Stabilizer (not shown). While another person
lifts the front of the Frame (1), attach the Front
Stabilizer to the Frame with two M10 x 73mm Carriage
Bolts (34) and two M10 Nylon Locknuts (33).

1

34

4

10

1

33

2. While another person lifts the back of the Frame (1),

attach the Rear Stabilizer (28) to the Frame with two

10 x 73mm Carriage Bolts (34) and two M10 Nylon

M
Locknuts (33).

2

28

33

3

3

1

34

3. The Console (23) requires three “AA” batteries (not

included); alkaline batteries are recommended. Insert
three batteries into the battery compartment.

sure that the batteries are oriented as shown by
the diagram inside the battery compartment.

4. While another person holds the Console (23) near the

Upright (2), connect the console wire to the Upper
Wire (44). Next, attach the ground wire to the Upright
with an M4 x 12mm Screw (43). Insert the console
wire and the Upper Wire into the Upright, and insert
the ground wire into the Console.

Next, attach the Console (23) to the Upright (2) with
four M4 x 12mm Screw (43).

pinching the console wire, the ground wire, or the
Upper Wire (44).

Turn the Resistance Knob (63) counterclockwise to
the lowest setting before going to the next step.

Be careful to avoid

Make

3

Batteries

23

4

23

Console Wire

44

43

Ground Wire

2

63

43

5. While another person holds the Upright (2) near the

Frame (1), connect the Upper Wire (44) to the Reed
Switch W
(63) to the Lower Cable (55) in the following way:

See drawing

•
Lower Cable (55), and insert the tip of the
Resistance Cable (63) into the wire clip inside of the
metal bracket.

• See drawing B. Firmly pull the Resistance Cable
(63) and slide it into the metal bracket on the Lower
Cable (55) as shown.

See drawing C. Using pliers, squeeze together the

•
prongs on the upper end of the metal bracket.

Push the excess cable and wire down into the Frame
(1). Next, slide the Upright (2) onto the Frame. Be
careful not to pinch the wires or cables. Attach the
Upright with two M10 x 68mm Button Bolts (48), two
M10 Split W
(33). Do not tighten the Button Bolts yet.

ire (53). Next, connect the Resistance Cable

A. Pull up on the metal bracket on the

ashers (59), and two M10 Nylon Locknuts

5

2

33

63

55

A

Metal

Bracket

63

55

44

B

59

53

63

1

55

Make sure that

48

the wires and
cables do not

get pinched

and damaged

during this

C

step.

63

55

5