Weslo WETL26806.0 User Manual
Model No. WETL26806.0
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
USER'S MANUAL
or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: T
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and
0.5 m (2 ft.) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should be used only by persons
weighing 125 kg (275 lbs.) or less.
8. Never allow more than one person on the
treadmill at a time.
Wear appropriate exercise clothes when
9.
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
shoes; never use the treadmill with bare feet,
wearing only stockings, or in sandals.
10. When connecting the power cord (see page
12), plug the power cord into an earthed circuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
If an extension cord is needed, use only a 3-
11.
conductor, 1mm
longer than 1.5 m (5 ft.).
o reduce the risk of burns, fire, electric shock, or injury to persons, read the
12. Keep the power cord away from heated surfaces.
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROUBLESHOOTING on page 20 if the treadmill is
not working properly.)
14. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 13).
15. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
16. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
17. The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The pulse sensor is intended only as an exercise aid in determining heart rate trends in
general.
18. Never leave the treadmill unattended while it
Always remove the key and unplug
Always wear athletic
2
(14-gauge) cord that is no
is running.
the power cord when the treadmill is not in
use.
19. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 18.)
You must be able to safely lift 20 kg (45 lbs.) to
raise, lower, or move the treadmill.
20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
21.
Inspect and properly tighten all parts of the
treadmill regularly.
Never insert any object into any opening.
22.
3
23. DANGER: Always unplug the power
ord immediately after use, before cleaning
c
the treadmill, and before performing the
maintenance and adjustment procedures de-
cribed in this manual. Never remove the
s
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
hould be performed by an authorized ser-
s
vice representative only.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown at the right have been placed on
the treadmill. If a decal is missing, or if it is not legible, call the telephone number on the front cover
of this manual and request a free replacement
decal. Apply the decal in the location shown. Note:
The decals are not shown at actual size.
4
BEFORE YOU BEGIN
hank you for selecting the new WESLO
T
8 treadmill. The CADENCE C 8 treadmill combines
C
advanced technology with innovative design to help you
achieve your fitness goals in the convenience of your
home. When you’re not exercising, the CADENCE C 8
treadmill can be folded up, requiring less than half the
floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have question after reading
Accessory Tray
Handrail
Pulse Sensor
Storage Latch
®
ADENCE
C
his manual, please see the front cover of this manual.
t
o help us assist you, please note the product model
T
number and serial number before calling. The model
number of the treadmill is WETL26806.0. The serial
number can be found on a decal attached to the treadmill (see the front cover of this manual for the location)
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Key/Clip
Upright
Walking Belt
Foot Rail
BACK
Rear Roller
Adjustment Bolts
On/Off Switch
Circuit Breaker
Cushioned
Walking Platform
RIGHT SIDE
5
ASSEMBLY
1/2” Screw (119)–1
3/4” Tek Screw (58)–8
Écrou (12)–4
Vis de 3/4" (3)–8
Boulon du Montant (4)–4
Rondelle du
Montant (7)–2
Vis de Mise à Terre
en Argent (10)–2
Rondelle Étoilée
du Montant (6)–4
Rondelle Étoilée
de la Rampe
(11)–4
Boulon de la
Rampe (9)–4
Bague
d’Espacement de
la Roue (94)–4
Boulon du Cadre(1)–2
Boulon de la Roue(5)–2
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed.
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver , rubber
mallet , adjustable wrench , and wire cutters .
Note: The underside of the treadmill walking
For help identifying the assembly hardware, see the drawings below.
drawing is the key number of the part, from the PART LIST on page 24. The number following the parentheses is
the quantity needed for assembly.
bled. To avoid damaging plastic parts, do not use power tools for assembly.
The number in parentheses below each
Note: If a part is not in the parts bag, check to see if it has been preassem-
6
1. Make sure that the power cord is unplugged.
ttach a Wheel (95) to each side of the Base
A
(37) with a Wheel Bolt (5), two Wheel Spacers
94), and a Nut (12) as shown. Do not over-
(
tighten the Wheel Bolts; the Wheels should
turn freely.
Identify the Right Upright (39), which has a
square hole in the location shown.
Orient the Right Upright (39) and the Base (37)
as shown. Attach the Right Upright to the Base
with two Upright Bolts (4) and two Upright Star
Washers (6);
yet.
do not tighten the Upright Bolts
1
94
5
39
95
4
9
94
5
12
37
9
4
9
12
Square
Hole
5
6
4
2. Orient the Left Upright (38) as shown, and attach
it to the Base (37) with two Upright Bolts (4) and
two Upright Star Washers (6);
the Upright Bolts yet.
3. With the help of a second person, raise the
Uprights (38, 39) so the Base (37) is flat on the
floor as shown. Next, position the front of the
treadmill Frame (36) between the Uprights.
See the inset drawing. Locate the wire inside the
lower end of the Right Upright (39). Tie the wire
securely to the end of the Upright Wire (69).
Next, insert the wire and the end of the Upright
Wire into the hole in the Right Upright.
do not tighten
2
Latch
Holes
37
38
6
6
3
38
Wire
39
39
69
4
69
Wire
36
37
7
4. See the left inset drawing. Identify the two Frame
Spacers (45). Open the included packet of
rease, and apply grease to both sides of both
g
Frame Spacers. Next, identify the outer side of
ach Frame Spacer.
e
4
38
39
Hold a Frame Spacer (45) between the Right
Upright (39) and the Lift Frame (41), with the
outer side of the Frame Spacer facing the
Right Upright. Attach the Right Upright to the
Lift Frame with a Frame Bolt (1), an Upright
Washer (7), and a Nut (12);
Nut yet.
do not tighten the
45
41
Outer
Side
Inner
Side
1
45
2
7
1
39
12
7
1
45
41
5. Hold the remaining Frame Spacer (45) between
the Left Upright (38) and the Lift Frame (41),
with the outer side of the Frame Spacer facing the Left Upright. Attach the Left Upright to
the Lift Frame with a Frame Bolt (1), an Upright
Washer (7), and a Nut (12); do not tighten the
Nut yet.
5
38
12
7
1
45
45
Outer
Side
1
Inner
Side
41
38
12
7
45
41
8
6. Set the Console (68) face down on a soft sur-
face to avoid scratching the Console. Identify the
ight Handrail (40), which has a large hole in the
R
location shown. Hold the Right Handrail near the
onsole. Insert the console wire into the large
C
hole in the Right Handrail and out of the top as
shown. Next, attach the Right Handrail with
three 3/4" Screws (3). Make sure that no wires
are pinched. Start all three Screws before
tightening any of them; do not overtighten
the Screws.
Next, attach the console ground wire to the Right
Handrail (40) with a Silver Ground Screw (10).
Attach the Left Handrail (not shown) to the
Console (68) in the same way. Note: There are
no wires on the left side of the Console.
6
3
40
Large Hole
10
Console
Ground Wire
onsole
C
W
ire
3
3
68
7. Locate the wire in the upper end of the Right
Upright (39). Pull the wire until the end of the
Upright Wire (69) is extending from the Right
Upright. Then, untie and discard the wire.
8. Connect the Upright Wire (69) to the console
wire. Make sure to connect the connectors
properly (see the inset drawing). The connectors should slide together easily and snap
into place. If they do not, turn one connector
and try again.
CONNECTED PROPERLY, THE CONSOLE
MAY BE DAMAGED WHEN THE POWER IS
TURNED ON.
the excess wire into the Right Upright (39).
IF THE CONNECTORS ARE NOT
Then, insert the connectors and
7
Wire
8
68
40
69
39
Next, insert the bracket on the Right Handrail
(40) into
bracket on the Left Handrail (not shown) into the
Left Upright (not shown).
wires are pinched.
the Right Upright (39) and insert the
Make sure that no
9
Bracket
69
Console
Wire
39
69
Loading...