Weslo WETL13806.0 User Manual
Model No. WETL13806.0
Serial No.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
USER'S MANUAL
or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
ollowing important precautions and information before operating the treadmill.
f
1. It is the responsibility of the owner to ensure
hat all users of this treadmill are adequately
t
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and
0.5 m (2 ft.) on each side. Do not place the
treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should be used only by persons
weighing 115 kg (250 lbs.) or less.
8. Never allow more than one person on the
treadmill at a time.
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
12. Never move the walking belt while the power
s turned off. Do not operate the treadmill if
i
the power cord or plug is damaged, or if the
treadmill is not working properly. (See MAINTENANCE AND TROUBLESHOOTING on page
18 if the treadmill is not working properly.)
13. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 13).
14. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
15. The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The pulse sensor is intended only as an exercise aid in determining heart rate trends in
general.
16. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
17. Never leave the treadmill unattended while it is
running. Always remove the key and unplug
the power cord when the treadmill is not in use.
9. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
Always wear athletic
shoes; never use the treadmill with bare feet,
wearing only stockings, or in sandals.
When connecting the power cord (see page
10.
12), plug the power cord into an earthed circuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
11. Keep the power cord away from heated surfaces.
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6 and HOW TO FOLD
AND MOVE THE TREADMILL on page 16.)
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.
19. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
20. Do not change the incline of the treadmill by
placing objects under the treadmill.
21. Inspect and properly tighten all parts of the
treadmill regularly.
22. Never drop or insert any object into any
opening on the treadmill.
3
ther than the procedures in this manual
3.
2
DANGER: A
cord immediately after use, before cleaning
he treadmill, and before performing the main-
t
tenance and adjustment procedures de-
cribed in this manual. Never remove the
s
motor hood unless instructed to do so by an
authorized service representative. Servicing
lways unplug the power
o
should be performed by an authorized service
representative only.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer-
ial, rental, or institutional setting.
c
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decal shown at the right has been placed on the
treadmill. If the decal is missing, or if it is not legible, call
the telephone number on the front cover of this manual
and order a free replacement decal. Apply the decal in the
location shown. Note: The decal is not shown at actual
size.
4
BEFORE YOU BEGIN
Thank you for selecting the new WESLO®CADENCE
C6 treadmill. The CADENCE C6 treadmill combines
advanced technology with innovative design to make
your workouts at home more effective and enjoyable.
nd when you’re not exercising, the CADENCE C6
A
treadmill can be folded up, requiring less than half the
floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Accessory Tray
Handrail
Storage Latch
ing this manual, please see the front cover of this manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number of the treadmill is WETL13806.0.
he serial number can be found on a decal attached to
T
the treadmill (see the front cover of this manual for the
location).
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Console
Key/Clip
Walking Belt
Foot Rail
Rear Roller
Adjustment Bolts
Hood
On/Off Switch
Circuit Breaker
Wheel
5
ASSEMBLY
Handrail Washer (11)–2
2 3/4” Bolt (47)–4
S
tar Washer (81)–4
W
asher (29)–4
3
Upright Washer
(14)–6
Upright Nut (16)–4
Handrail Bolt (8)–4
Upright Star
Washer (9)–2
Handrail Star
Washer (5)–4
Console Screw/
Latch Screw (95)–6
Crossbar Star
Washer (7)–2
Crossbar Screw
(85)–2
4” Bolt (120)–2
Wheel Housing
Washer (32)–4
Wheel Housing
Nut (43)–4
Upright Bolt (2)–4
Frame Bolt (1)–2
Wheel Housing Bolt (13)–4
ssembly requires two persons.Set the treadmill in a cleared area and remove all packing materials; do not
A
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
In addition to the included hex keys , assembly requires a phillips screwdriver , an
adjustable wrench , and needlenose pliers .
Use the drawings below to identify hardware during assembly. Note: If a part is not in the parts bag, check to
see if it has been preattached to one of the parts to be assembled. Extra hardware may be included. To
avoid damaging plastic parts, do not use power tools for assembly.
1. Make sure that the power cord is unplugged.
Have a second person hold the Base (52) in the
position shown.
Identify the Left Upright (53) (the Right Upright [54]
has a large hole near the lower end).
Hold the Left
holes are on top as shown. Insert two Upright
Bolts (2) into the bracket on the Left Upright.
Then, attach the Left Upright to the Base (52) with
the Upright Bolts, two Upright Washers (14) and
two Upright Nuts (16). Do not tighten the
Upright Nuts yet.
Attach the Right Upright (54) to the Base (52) in
the same way.
Upright (53) so the two small
1
Large
Hole
54
Small
Holes
6
14
2
16
14
52
53
14
2
16
14
2. Slide the two Wheel Housings (45) onto the Base
52). Attach each Wheel Housing with two Wheel
(
Housing Bolts (13), two Wheel Housing Washers
(32), and two Wheel Housing Nuts (43).
2
45
13
32
43
2
3
32
45
3
4
3. Position the Base (52) as close to the front of the
treadmill as possible.
See drawing 3a. Locate the wire tie in the Right
Upright (54). Tie the wire tie securely to the connector on the end of the Wire Harness (98).
Next, pull the opposite end of the wire tie out of
the upper end of the Right Upright (54), until the
Wire Harness is routed completely through the
Right Upright. Secure the Wire Harness to the
upper end of the Right Upright so that it will not
fall inside.
See drawing 3b. Press the indicated Grommet
(49) into the Right Upright (54).
13
52
3
98
54
52
3a
98
3b
98
32
54
Wire Tie
54
49
52
7
4. See the left inset drawing and identify a Frame
Spacer (11). Hold the Frame Spacer between
he Right Upright (54) and the Frame (51).
t
Attach the Right Upright to the Frame with a
rame Bolt (1), an Upright Washer (14), and an
F
Upright Star Washer (9); do not tighten the
Frame Bolt yet.
4
54
9
5. Hold the other Frame Spacer (11) between the
Left Upright (53) and the Frame (51). Attach the
Left Upright to the Frame with a Frame Bolt (1),
an Upright Washer (14), and an Upright Star
Washer (9); do not tighten the Frame Bolt yet.
54
9
14
1
1
11
14
51
11
11
51
5
53
9
14
1
11
11
51
53
14
1
9
11
51
8
. Set the Console (91) face down on a soft sur-
6
face to avoid scratching it. Hold the Right
Handrail (33), which has a large hole in the location shown, near the Console.
Next, insert the console wire into the hole in the
side of the Right Handrail (33). Using
needlenose pliers, pull the console wire out of
the hole near the bracket on the Right Handrail.
6
Console
ire
W
racket
B
33
91
Large
Hole
7. Set the Right Handrail (33) on the Console (91).
Make sure that the console wire is not
pinched. Start a Crossbar Screw (85) with a
Crossbar Star Washer (7) into the Right
Handrail, and then start two Console Screws
(95) into the Right Handrail. Tighten the
Crossbar Screw and then tighten the two
Console Screws; do not overtighten the
Screws.
Attach the Left Handrail (not shown) to the
Console (91) in the same way. Note: There is
not a console wire on the left side.
7
85
7
33
91
95
9
Loading...