Weslo WETL1214.0 User Manual

Class H Fitness Product

Model No. WETL1214.0
Serial No.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:

USER’S MANUAL

08457 089 009

Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK

[e-mail]

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

MAINTENANCE AND TROUBLESHOOTING

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

WESLO is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the
treadmill on any surface that blocks air open­ings. To protect the floor or carpet from dam­age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 115 kg (250 lbs.).

8. Never allow more than one person on the
treadmill at a time.

9.

Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.

Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

11. If an extension cord is needed, use only a 3­conductor, 1mm
longer than 1.5 m (5 ft.).

12. Keep the power cord away from heated sur­faces.

13. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread­mill is not working properly.)

14. Never start the treadmill whilst you are stand­ing on the walking belt. Always hold the
handrails whilst using the treadmill.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

16. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca­tion of the on/off switch.)

17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6 and HOW
AND MOVE THE TREADMILL on page 14.)
You must be able to safely lift 20 kg (45 lbs.)
to raise, lower, or move the treadmill.

When folding or moving the treadmill, make

18.
sure that the storage latch is fully closed.

2

(14-gauge) cord that is no

TO FOLD

When connecting the power cord (see page

10.

11), plug the power cord into an earthed cir­cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.

Do not change the incline of the treadmill by

19.
placing objects under the treadmill.

20. Inspect and properly tighten all parts of the
treadmill regularly.

21. Never drop or insert any object into any
opening.

3

22. DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorised service representative. Servicing

other than the procedures in this manual
should be performed by an authorised service
representative only.

23. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer-

ial, rental, or institutional setting.

c

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown has been placed on your treadmill. If the decal is miss­ing, or if it is not legible, please call our Customer Service Department
and order a free replacement decal (see ORDERING REPLACEMENT
PARTS on the back cover of this manual). Apply the replacement decal in
the location shown.

Note: This decal is not shown at actual size.

4

BEFORE YOU BEGIN

Thank you for selecting the WESLO®SPORT 100
treadmill. The SPORT 100 treadmill combines ad­vanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in

he convenience and privacy of your home. And when

t
you’re not exercising, the unique SPORT 100 treadmill
can be folded up, requiring less than half the floor
space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-

Water Bottle Holder
(Bottle not included)

Key/Clip

Storage Latch

ing this manual, please call our Customer Service
Department at 08457 089 009. To help us assist you,
please note the product model number and serial num­ber before calling. The model number of the treadmill

s WETL1214.0. The serial number can be found on a

i
decal attached to the treadmill (see the front cover of
this manual for the location of the decal).

Before reading further, please review the drawing
below and familiarise yourself with the labelled parts.

Console

Handrail

LEFT SIDE

Walking Belt

Foot Rail

Rear Roller
Adjustment Bolts

RIGHT SIDE

Hood

Circuit Breaker

On/Off Switch

Front Wheel

Incline Leg

5

Wheel Nut

(61)–2

3/4” Screw

(77)–14

Upright Bolt (28)–6

Crossbar/Spacer

Screw (86)–4

Silver Ground

Screw (89)–1

1/2” Screw

(92)–2

5/16” Star Washer

(68)–4

3/8” Star Washer

(90)–2

Frame Bolt (36)–2

Wheel Bolt (33)–2

1” Tek Screw

(11)–4

ASSEMBLY

ssembly requires two persons. Place a mat under the treadmill to protect the floor during assembly.Set

A

the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until as­sembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt,
simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver ,
adjustable spanner , wire cutters , and needlenose pliers .

For help identifying the assembly hardware, see the part identification chart below.

WARNING: Do not plug in the power

cord until the treadmill is completely assembled.

1. Orient the Base (55) so the holes for the four Base Pads
(31) are on top. Attach the four Base Pads to the Base
with the four 1” Tek Screws (11).

Attach the two Wheels (34) to the Base (55) with two
Wheel Bolts (33) and two Wheel Nuts (61) as shown. Do

not overtighten the Bolts. The Wheels must be able
to turn freely.

1

6

33

34

11

61

31

34

11

55

11

31

19

11

31

61

33

2. Identify the Left Upright (32) and the Right Upright (37),
which has a large round hole near the lower end.

ee drawing 2a. Make sure that there are two U-nuts

S
(93) in the lower end of each Upright (32, 37).

See drawing 2b. Have a second person hold the Base

55) so it is resting on the Wheels (34) as shown. M

(

sure that the Base is oriented so that the Base Pads
(31) are in the location shown. Attach the Right and

Left Uprights (32, 37) to the Base with four Upright Bolts
(28) and four 5/16” Star Washers (68).

the Bolts yet. Make sure that the large hole in the
Right Upright is on the side shown, and that the two
small holes in the Left Upright are on the side
shown.

Do not tighten

ake

2

2

Hole

b

37

37

Small
Holes

68

55

2a

93

32, 37

68

32

28

31

34

3. With the help of a second person, place the Frame (21)

between the Uprights (32, 37). Feed the Wire Harness
(53) into the large round hole near the lower end of the
Right Upright (37), and then pull the Wire Harness out of
the upper end as shown.

See drawing 3a. Raise the Uprights (32, 37) to the vertical
position. Hold an Upright Spacer (58) against one side of
the Frame (21) as shown. Insert a Frame Bolt (36) into the
indicated hole in the Upright Spacer and the Frame. Next,
tighten a Spacer Screw (86) into the Upright Spacer and
the Frame. Remove the Frame Bolt. Repeat on the other
side of the Frame.

With the help of a second person, carefully lift the Frame
(21), and hold the Upright Spacers (58) between the Right
Upright (37) and the Left Upright (not shown). Align the in­dicated hole in the Right Upright with the hole in the right
Upright Spacer. Insert a Frame Bolt (36), with a 3/8” Star
Washer (90), into the Right Upright and the Upright
Spacer, and loosely thread the Upright Bolt into the Frame.

Repeat this step on the left side of the treadmill.

Large

Hole

3

3a

21

32

58

34

86

31

28

37

53

Hole

53

21

90

36

Holes

With the help of a second person, tip the treadmill so the

4.

Base (not shown) is flat on the floor.

Insert the tab on one of the Handrail Brackets (40) into the
slot in the Right Upright (37). Attach the Handrail Bracket
with a 3/4” Screw (77); be careful not to confuse the

3/4” Screws with the slightly larger Crossbar Screws
(86, not shown). Attach the other Handrail Bracket to the

Left Upright (not shown) as described above.

4

37

Slot

Tab

40

77

7

5. Identify the Right Handrail (5), which has a large hole in

he left side. Feed the Wire Harness (53) into the hole in

t
the bottom of the Right Handrail and out of the large hole

n the side. Note: It may be helpful to use needlenose pli-

i
ers to pull the Wire Harness out of the hole.

Press a Handrail Cap (87) onto the lower end of the

ight Handrail (5) as shown.

R

5

28

4

53

Hole

Set the Right Handrail (5) on the Right Upright (37), with
the Handrail Bracket (40) inserted into the lower end of
the Right Handrail.

Attach the Right Handrail (5) with an Upright Bolt (28) in
the upper end and a 3/4” Screw (77) in the lower end.

Do not tighten the Upright Bolt until step 6 is com­pleted.

Attach the Left Handrail (4) as described above. Note:
There is not a wire harness on the left side.

6. See the inset drawings and identify the two Crossbar

Screws (86); be careful not to confuse the Crossbar

Screws with the 3/4” Screws (77). The Crossbar
Screws are slightly larger than the 3/4” Screws.

Hold the Crossbar (65) on the small brackets on the
Handrails (4, 5). Attach the Crossbar to the small brack­ets with the two Crossbar Screws (86). Do not tighten

the Crossbar Screws yet.

Attach the end of the ground wire on the Wire Harness
(53) to the small hole in the left side of the Right Handrail
(5) with the Silver Ground Screw (89).

32

87

77

6

86

4

28

5

77

Small Bracket

65

89

Small Bracket

5

87

Hole

37

40

53

86

See step 5. Tighten the Upright Bolts (28).

86

77

8