Weslo WETL11806.0 User Manual

odel No. WETL11806.0

M
Serial No.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:

8457 089 009

USER’S MANUAL

Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK

e-mail: [e-mail]

CAUTION

Read all precautions and instruc
tions in this manual before using
this equipment. Save this manual
for future reference.

-

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

TREADMILL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

M

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

IMPORTANT PRECAUTIONS

WARNING:

tions before using the treadmill.

1. It is the responsibility of the owner to ensure
that all users of the treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described.

3. This treadmill is intended for in-home use
only. Do not use the treadmill in a commer­cial, rental, or institutional setting.

4.

Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. To protect the floor
or carpet from damage, place a mat under the
treadmill.

5. Inspect and properly tighten all parts of the
treadmill regularly; replace any worn parts
immediately.

6. The roller guards (see the drawing on page 3)
must be 3 mm (1/8 in.) from the rear roller.
Adjust the roller guards, if necessary

To reduce the risk of serious injury, read the following important precau-

.

weighing over 115 kg (250 lbs.). Never allow
more than one person on the treadmill at a
time.

9. Wear appropriate clothes when exercising.
Do not wear loose clothes that could become
caught on the treadmill.

10. Always wear athletic shoes when using the
treadmill; do not use the treadmill with bare
feet, wearing only stockings, or in sandals.

11. Do not use the treadmill if it is not working
properly.

12. Do not place hands or feet under the tread­mill whilst it is in use.

13. Always hold the handrail when mounting,
dismounting, or exercising on the treadmill.

14. If you feel pain or dizziness whilst exercising,
stop immediately and begin cooling down.

7. Keep children under the age of 12 and pets
away from the treadmill at all times.

8. The treadmill should not be used by persons

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob
lems. Read all instructions before using this product. ICON assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.

2

-

BEFORE YOU BEGIN

218557

Thank you for selecting the new WESLO®CADENCE
150 treadmill. The CADENCE 150 treadmill is
designed to let you enjoy effective cardiovascular
workouts in the comfort and convenience of your
home. And when the CADENCE 150 treadmill is not in

se, it can be folded up, requiring less than half the

u
space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill.

The decal shown above has been
placed on the treadmill in the location
shown. If the decal is missing or illegi­ble, call our Customer Service
Department at 08457 089 009 and
order a free replacement decal. Apply
the decal in the location shown.

If you have questions after read-

ing this manual, please call our Customer Service
Department at 08457 089 009. To help us assist you,
please note the product model number and serial
number before calling. The model number is
WETL11806.0. The serial number can be found on a

ecal attached to the treadmill (see the front cover of

d
this manual to find the location of the decal).

Before reading further, please familiarise yourself with
the parts that are labelled in the drawing below.

Console

Warning Decal

Storage Pin

Handrail

Resistance

Control

Walking Belt

Roller Guards

Rear Roller Adjustment Bolts

Hood

3

ASSEMBLY

The help of a second person is recommended. Set the treadmill in a cleared area and remove all packing
materials. Do not dispose of the packing materials until assembly is completed. Assembly requires only the
included hex key and wrench .

1. Identify the Right Upright (36); the Resistance
Control/Cable (44) is routed through the Right Upright.
Place the Base (14) near the Right Upright and the
Frame (29). Have another person hold the Right Upright
against the Base as shown.

Attach the Right Upright (36) to the Base (14) with two
M8 x 63mm Bolts (38), two M8 Curved Washers (37),
and two M8 Nylon Nuts (13) as shown. Make sure that
the Curved Washers are turned so they conform to the
curve of the Base.

Attach the Left Upright (35) to the Base (14) in the same
way. Make sure that the Left Upright is oriented so the
two indicated holes are on the side shown.

en the Nylon Nuts yet.

2. Raise the Left Upright (35) and the Right Upright (36) to
the position shown. See the inset drawing. Connect the
Reed Switch Wire (6) to the Short Reed Switch Wire (A).

Attach the Hood (28) to the front of the Frame (29) with
two M5 x 10mm Bolts (10).

Do not tighten the Nylon Nuts yet.

Do not tight-

1

2

35

38

37

35

13

37

6

Bracket

13

38

10

14

36

28

37

44

Holes

35

13

37

36

29

10

3. See drawing 3a. Hold the front of the Frame (29)
between the Left Upright (35) and the Right Upright (not
shown). Locate the small incline knob on each side of
the Frame. Slide the knobs into one of the three sets of
slots in the brackets on the Uprights.

the knobs are fully inserted at the same height.

Look under the Frame (29) near the Left Upright (35).
See drawing 3b.
underside of the Frame. Insert the Reed Switch (6) into
the Clip as shown. Next, locate the Magnet (12) on the
left Flywheel (9).
aligned with the Reed Switch.

so that there is a 3 mm (1/8 in.) gap between the
Reed Switch and the Magnet. Then, tighten the M4 x

12mm Screw (3) in the Clip.

Locate the Clip (1

urn the Flywheel until the Magnet is

T

Move the Reed Switch

Make sure

1) attached to the

that

A

3a

Bracket

29

4

35

Knob

3b

12

V

beneath

3 mm

iew from

9

3

6

29

11