www.iconeurope.com
Visit our website at
Class H Fitness Product
Model No. WETL11140
Serial No.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
USER’S MANUAL
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
csuk@iconeurope.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described in this
manual.
3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and
0.5 m (2 ft.) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 115 kg (250 lbs.).
8. Never allow more than one person on the
treadmill at a time.
9.
Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
11. If an extension cord is needed, use only a 3conductor, 1mm2(14-gauge) cord that is no
longer than 1.5 m (5 ft.).
12. Keep the power cord away from heated surfaces.
13. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the treadmill is not working properly.)
14. Never start the treadmill whilst you are standing on the walking belt. Always hold the
handrails whilst using the treadmill.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
16. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the location of the on/off switch.)
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6 and HOW
AND MOVE THE TREADMILL on page 14.)
You must be able to safely lift 20 kg (45 lbs.)
to raise, lower, or move the treadmill.
When folding or moving the treadmill, make
18.
sure that the storage latch is fully closed.
TO FOLD
When connecting the power cord (see page
10.
11), plug the power cord into an earthed circuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
Do not change the incline of the treadmill by
19.
placing objects under the treadmill.
20. Inspect and properly tighten all parts of the
treadmill regularly.
21. Never drop or insert any object into any
opening.
3
22. DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorised service representative. Servicing
other than the procedures in this manual
should be performed by an authorised service
representative only.
23. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer-
ial, rental, or institutional setting.
c
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decal shown has been placed on your treadmill. If the decal is missing, or if it is not legible, please call our Customer Service Department
and order a free replacement decal (see ORDERING REPLACEMENT
PARTS on the back cover of this manual). Apply the replacement decal in
the location shown.
Note: This decal is not shown at actual size.
4
BEFORE YOU BEGIN
Thank you for selecting the WESLO CADENCE®55
treadmill. The CADENCE 55 treadmill combines advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
he convenience and privacy of your home. And when
t
you’re not exercising, the unique CADENCE 55 treadmill can be folded up, requiring less than half the floor
space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Water Bottle Holder
(Bottle not included)
Key/Clip
Storage Latch
ing this manual, please call our Customer Service
Department at 08457 089 009. To help us assist you,
please note the product model number and serial number before calling. The model number of the treadmill
s WETL11140. The serial number can be found on a
i
decal attached to the treadmill (see the front cover of
this manual for the location of the decal).
Before reading further, please review the drawing
below and familiarise yourself with the labelled parts.
Console
Handrail
LEFT SIDE
Foot Rail
Walking Belt
Rear Roller
Adjustment Bolts
RIGHT SIDE
Hood
Circuit Breaker
On/Off Switch
Front Wheel
Incline Leg
5
ASSEMBLY
2 3/4” Bolt (47 )–4
Wheel Nut
(61)–2
1
3/4” Screw
(77)–10
Upright Bolt (28)–6
Crossbar/Spacer
Screw (86)–4
Silver Ground
Screw (89)–1
1/2” Screw
(92)–2
5/16” Star Washer
(68)–4
3/8” Star Washer
(104)–2
Frame Bolt (36)–2
Wheel Bolt (33)–2
1” Tek Screw
(11)–4
ssembly requires two persons. Place a mat under the treadmill to protect the floor during assembly.Set
A
the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt,
simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key and your own phillips screwdriver ,
adjustable spanner , wire cutters , and needlenose pliers .
For help identifying the assembly hardware, see the part drawings below.
WARNING: Do not plug in the power
cord until the treadmill is completely assembled.
Orient the Base (55) so the holes for the four Base Pads
1.
(31) are on top. Attach the four Base Pads to the Base
with the four 1” Tek Screws (11).
Attach the two Wheels (34) to the Base (55) with two
Wheel Bolts (33) and two Wheel Nuts (61) as shown. Do
not overtighten the Bolts. The Wheels must be able
to turn freely.
6
1
33
34
11
61
31
11
55
11
31
19
11
31
61
34
33
2. Identify the Right Upright (37), which has a large round
hole near the lower end, and the Left Upright (32).
2
ole
H
2a
See drawing 2a. Make sure that there are two U-nuts
93) in the lower end of each Upright (32, 37).
(
See drawing 2b. Have a second person hold the Base
(55) so it is resting on the Wheels (34) as shown. Attach
the Right and Left Uprights (32, 37) to the Base with four
Upright Bolts (28) and four 5/16” Star Washers (68). Do
not tighten the Bolts yet. Make sure that the large
hole in the Right Upright is on the side shown, and
that the two small holes in the Left Upright are on the
side shown. In addition, make sure that the Base is
oriented so the Base Pads (31) are in the location
shown.
3. With the help of a second person, place the Frame (21)
between the Uprights (32, 37). Feed the Wire Harness
(53) into the large round hole near the lower end of the
Right Upright (37), and then pull the Wire Harness out of
the upper end as shown.
See drawing 3a. Raise the Uprights (32, 37) to the vertical
position. Hold an Upright Spacer (58) against one side of
the Frame (21) as shown. Insert a Frame Bolt (36) into the
indicated hole in the Upright Spacer and the Frame. Next,
tighten a Spacer Screw (86) into the Upright Spacer and
the Frame. Remove the Frame Bolt. Repeat on the other
side of the Frame.
2b
Large
Hole
3
3a
37
37
Small
Holes
32
68
31
55
28
3
9
32
21
37
53
32, 37
68
28
31
34
Hole
53
37
With the help of a second person, carefully lift the Frame
(21), and hold the Upright Spacers (58) between the Right
Upright (37) and the Left Upright (not shown). Align the indicated hole in the Right Upright with the hole in the right
Upright Spacer. Next, insert a Frame Bolt (36), with a 3/8”
Star Washer (104), into the Right Upright and the Upright
Spacer, and loosely thread the Upright Bolt into the Frame.
Repeat this step on the left side of the treadmill.
4. Identify the Right Handrail (5), which has a large hole in
the left side. Feed the Wire Harness (53) into the hole in
the bottom of the Right Handrail and out of the large hole
in the side. Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the hole.
Set the Right Handrail (5) onto the right Upright (37).
Attach the Right Handrail with a Upright Bolt (28) as
shown. Firmly tighten the Upright Bolt.
Attach the Left Handrail (4) as described above. Note:
There is not a wire harness on the left side.
104
86
58
21
4
28
4
32
Holes
53
28
5
36
Hole
Hole
37
7
5. See the inset drawings and identify the two Crossbar
Screws (86); be careful not to confuse the Crossbar
crews with the 3/4” Screws (77). The Crossbar
S
Screws are slightly larger than the 3/4” Screws.
Hold the Crossbar (65) on the small brackets on the
Handrails (4, 5). Attach the Crossbar to the small brackets with the two Crossbar Screws (86). Do not tighten
the Crossbar Screws yet.
5
4
mall Bracket
S
86
Small Bracket
5
6
89
3
5
Attach the end of the ground wire on the Wire Harness
(53) to the small hole in the left side of the Right Handrail
(5) with the Silver Ground Screw (89).
6. Place the Console Base (45) on the Right Handrail (5)
and the Left Handrail (not shown). Attach the Console
Base with four 3/4” Screws (77) (only two Screws are
shown). Do not tighten the Screws yet.
Insert the Wire Harness (53) through the two indicated
plastic ties on the Console Base (45). Next, insert the
Wire Harness up through the opening beside the Wire
Cover (50). Make sure that the Wire Cover is securely attached to the Console Base.
See drawing 6a. Look at the top of the Console Base
(45). Insert the Wire Harness (53) through the plastic tie
on top of the Console Base.
6
77
86
45
Ties
86
5
53
6a
5
77
50
86
Tighten the two Crossbar Screws (86) (only one is
shown).
7. Press the Book Rack (49) onto the Console Base (45) in
the location shown.
53
Tie
45
7
49
45
8
Loading...