Weslo WETL01540 User Manual
Model No. WETL01540
erial No.
S
Serial Number Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
8457 089 009
USER’S MANUAL
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS1
UK
e-mail: csuk@iconeurope.com
18JG
CAUTION
Read all precautions and instruc
tions in this manual before using
this equipment. Save this manual
for future reference.
-
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TREADMILL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
AINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
M
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
IMPORTANT PRECAUTIONS
WARNING:
tions before using the treadmill.
1. It is the responsibility of the owner to ensure
that all users of the treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. This treadmill is intended for in-home use
only. Do not use the treadmill in a commercial, rental, or institutional setting.
4. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and
0.5 m (2 ft.) on each side. To protect the floor
or carpet from damage, place a mat under the
treadmill.
5. Inspect and properly tighten all parts of the
treadmill regularly; replace any worn parts
immediately.
6. The roller guards (see the drawing on page 3)
must be 3 mm (1/8 in.) from the rear roller
Adjust the roller guards, if necessary.
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
To reduce the risk of serious injury, read the following important precau-
.
8. The treadmill should not be used by persons
weighing over 115 kg (250 lbs.). Never allow
more than one person on the treadmill at a
time.
9. Wear appropriate clothes when exercising.
Do not wear loose clothes that could become
caught on the treadmill.
10. Always wear athletic shoes when using the
treadmill; do not use the treadmill with bare
feet, wearing only stockings, or in sandals.
11. Do not use the treadmill if it is not working
properly.
12. Do not place hands or feet under the treadmill whilst it is in use.
13. Always hold the handrail when mounting,
dismounting, or exercising on the treadmill.
14. If you feel pain or dizziness whilst exercising,
stop immediately and begin cooling down.
WARNING: Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health prob
lems. Read all instructions before using this product. ICON assumes no responsibility for personal
injury or property damage sustained by or through the use of this product.
2
-
BEFORE YOU BEGIN
218557
Thank you for selecting the new WESLO®CARDIOSTRIDE PLUS treadmill. The CARDIOSTRIDE PLUS
treadmill is designed to let you enjoy effective cardiovascular workouts in the comfort and convenience of
your home. And when the CARDIOSTRIDE PLUS
readmill is not in use, it can be folded up, requiring
t
less than half the space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill.
The decal shown above has been
placed on the treadmill in the location
shown. If the decal is missing or illegible, call our Customer Service
Department at 08457 089 009 and
order a free replacement decal. Apply
the decal in the location shown.
If you have questions after read-
ing this manual, please call our Customer Service
Department at 08457 089 009. To help us assist you,
please note the product model number and serial
number before calling. The model number is
WETL01540. The serial number can be found on a
ecal attached to the treadmill (see the front cover of
d
this manual to find the location of the decal).
Before reading further, please familiarise yourself with
the parts that are labelled in the drawing below.
Console
Warning Decal
Handrail
Storage Pin
Walking Belt
Roller Guards
Rear Roller Adjustment Bolts
Hood
3
ASSEMBLY
The help of a second person is recommended. Set the treadmill in a cleared area and remove all packing
materials. Do not dispose of the packing materials until assembly is completed. Assembly requires only the
included hex key and wrench .
1. Identify the Right Upright (36), which has a single hole in
the indicated location. Hold the Right Upright against the
Base (14) as shown, and orient the Right Upright so the
two indicated holes are on the side shown.
Attach the Right Upright (36) to the Base (14) with two
M8 x 50mm Bolts (38), two M8 Curved Washers (37),
and two M8 Nylon Nuts (13) as shown. Make sure that
the Curved Washers are turned so they conform to the
curve of the Base.
Attach the Left Upright (35) to the Base (14) in the same
way. Make sure that the Left Upright is oriented so the
two indicated holes are on the side shown. Do not tight-
en the Nylon Nuts yet.
2. Raise the Left Upright (35) and the Right Upright (36) to
the position shown. Place the front of the Frame (29)
between the Left Upright and the Right Upright. Connect
the Reed Switch Wire (6) to the Short Reed Switch Wire
(A).
Do not tighten the Nylon Nuts yet.
1
36
37
13
38
37
2
35
37
38
6
14
29
Holes
Hole
Holes
35
13
37
36
3. Attach the Hood (28) to the front of the Frame (29) with
two M5 x 10mm Bolts (10).
4. See drawing 4a. Locate the small incline knob on each
side of the Frame (29). Slide the knobs into one of the
three sets of slots in the brackets on the Uprights (35).
Make sure that the knobs are fully inserted at the
same height.
Look under the Frame (29) near the Left Upright (35).
See drawing 4b. Locate the Clip (11) attached to the
underside of the Frame. Insert the Reed Switch (6) into
the Clip as shown. Next, locate the Magnet (12) on the
left Flywheel (9). Turn the Flywheel until the Magnet is
aligned with the Reed Switch.
so that there is a 3 mm (1/8 in.) gap between the
Reed Switch and the Magnet.
12mm Screw (3) in the Clip.
Move the Reed Switch
Then, tighten the M4 x
3
4a
Bracket
29
A
35
Knob
28
4b
12
View from
beneath
9
3
6
1/8”
29
10
1
1
29
4
Loading...