Weslo WCTL90062 Owner's Manual
Model No. WCTL90062
Serial No.
Serial Number Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee you complete
satisfaction through direct assistance from our factory.
TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our Customer Hot Line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-888-936-4266
Mon.–Fri., 9 a.m.–5 p.m. EST
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
O
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING and a PART LIST are attached to the center of this manual. Save the
EXPLODED DRAWING and PART LIST for future reference.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described.
3. Place the treadmill on a level surface, with
8 feet of clearance behind it. Do not place the
treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
Keep children and pets away from the tread-
6.
mill at all times.
7. The treadmill should be used only by persons
weighing 250 pounds or less.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women.
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
10. When connecting the power cord (see HOW
TO PLUG IN THE POWER CORD on page 7),
plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying
15 or more amps. No other appliance should
be on the same circuit.
Use only a CUL-listed surge protector, rated at
11.
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.
Keep the power cord and the surge protector
12.
away from heated surfaces.
Never move the walking belt while the power
13.
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See BE
FORE YOU BEGIN on page 4 if the treadmill is
not working properly.)
Never start the treadmill while you are stand
14.
ing on the walking belt. Always hold the
handrails while using the treadmill.
Always wear athletic
-
-
2
15. The treadmill is capable of high speeds.
131551
Adjust the speed in small increments to
avoid sudden jumps in speed.
16. To reduce the possibility of the treadmill
overheating, do not operate the treadmill
continuously for longer than 1 hour.
20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
21. Inspect and tighten all parts of the treadmill
every three months.
22. Never insert any object into any opening.
17. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
18. Never leave the treadmill unattended while it
is running. Always remove the key when the
treadmill is not in use.
19. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. You
must be able to safely lift 45 pounds (20 kg)
to raise, lower, or move the treadmill.
23. Always unplug the power cord before performing the maintenance and adjustment
procedures described in this manual. Never
remove the motor hood unless instructed to
do so by an authorized service representative. Servicing other than the procedures in
this manual should be performed by an authorized service representative only.
24. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill. If one of the decals is missing, or if it is not
legible, please call our Customer Service Department, toll-free, to order a free replacement decal (see
ORDERING REPLACEMENT PARTS on the back cover of this manual). Apply the decal in the location
shown.
BEFORE YOU BEGIN
hank you for selecting the WESLO
T
readmill. The CADENCE 927 treadmill combines ad-
t
vanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique CADENCE 927 can
be folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
Storage Latch
®
ADENCE 927
C
Accessory Tray
lease call our Customer Service Department toll-free
p
t
a
-888-936-4266,Monday through Friday, 9 a.m. until
1
5 p.m. Eastern Standard Time (excluding holidays). To
help us assist you, please note the product model number and serial number before calling.The model number of the treadmill is WCTL90062. The serial number
can be found on a decal attached to the treadmill (see
the front cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Console
Key/Clip
Speed Control
Towel Rack
Water Bottle
Holder (water bottle
is not included)
BACK
LEFT SIDE
Foot Rails
Rear Roller
Adjustment Bolt
Handrails
Walking Belt
FRONT
Circuit Breaker
Incline Knob
Power Cord
RIGHT SIDE
Cushioned Walking
Platform for maximum
exercise comfort
4
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose
f the packing materials until assembly is completed.Assembly requires two adjustable wrenches
o
(not included). A phillips screwdriver (not included) may also be needed.
. Attach six Base Pads (57) to the bottom of the Base (59)
1
in the indicated locations. Note: One extra Base Pad may
be included.
1
57
57
2. Firmly hold the Left or Right Handrail (5 or 44) as shown.
Raise the Handrails until the Base (59) and the front
Wheels (56) are resting on the floor.
3. Make sure that there is a Frame Guide (52) on the left
side of the Frame (23). If there is not, attach the Frame Guide to the left side of the Frame with two Screws
(100) as shown. Make sure that the thick end of the Frame Guide is at the bottom.
4. Next, the treadmill should be raised to the storage position. Hold the treadmill with your hands in the locations
shown at the right. To decrease the possibility of in-
jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your
legs rather than your back.
halfway to the vertical position.
Raise the treadmill about
2
3
100
4
Thick end
5
52
23
59
57
44
56
59
5. Move your right hand to the position shown at the right,
and hold the treadmill firmly. Raise the treadmill until the
torage Latch (50) closes over the Frame Guide (52)
S
(see the inset drawing).
atch closes fully over the Frame Guide.
L
Make sure that the Storage
5
Closed
50
52
6. Slide the Stabilizer Pad (63) onto the bottom of the
Stabilizer (64) in the indicated location.
Attach the Stabilizer (64) to the Base (59) with two
Stabilizer Bolts (62) and two
Before moving the treadmill, see HOW TO FOLD AND
MOVE THE TREADMILL on page 11.
7. Refer to assembly drawing 5 at the top of this page. Hold
the upper end of the treadmill with your right hand as shown. Using your left thumb, slide the Storage Latch
(50) to the left. Pivot the treadmill slightly until the frame and the foot rail are past the Storage Latch.
Hold the treadmill with both hands in the locations shown at the right. Lower the treadmill to the floor.
crease the possibility of injury, bend your legs and keep your back straight.
Nuts (16) as shown.
6
59
16
62
7
50
52
62
64
63
To de-
8. Remove the paper backing from the Adhesive Clip (77). Press the Adhesive Clip onto the Rear Roller Cover
(78) in the indicated location. Press the Allen Wrench (76) into the Adhesive Clip.
Make sure that all parts are tightened before you use the
treadmill.
mat under the treadmill.
Note: To protect the floor or carpet, place a
8
78
76
77
6
Loading...