Weslo Cadence Dx12 User Manual

USER'S MANUAL

Serial

Number

Decal

Model No. WLTL31092
Serial No.

QUESTIONS?

If you have questions, or if there
are missing or damaged parts,
we will guarantee complete sat­isfaction through direct assis­tance from our factory.

TO AVOID UNNECESSARY DE­LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni­cians on our Customer Hot Line
will provide immediate assis­tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and PART LIST are attached in the center of this manual.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 250 pounds.

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth­ing that could become caught in the treadmill.

Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 7),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi­pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor, see
your local WESLO dealer or call 1-800-999­3756 and order part number 146148.

12. Keep the power cord and the surge suppres­sor away from heated surfaces.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the tread­mill is not working properly.)

WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

2

The decal shown below has been placed on the treadmill. If the
decal is missing, or if it is not legible, please call our Customer
Service Department, toll-free, to order a free replacement decal
(see ORDERING REPLACEMENT PARTS on the back cover of
this manual). Apply the decal in the location shown.

Note: The decal is shown at 38% of actual size.

14. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

16. The pulse sensor is not a medical device.
Various factors, including the user's move­ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

17. Never leave the treadmill unattended while it
is running. Always remove the key and unplug
the power cord when the treadmill is not in
use.

18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
AND MOVE THE TREADMILL on page 10.)
You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the tread­mill.

19. Do not change the incline of the treadmill by
placing objects under the treadmill.

20. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

21. Inspect and tighten all parts of the treadmill
regularly.

22. Never drop or insert any object into any
opening.

23.

DANGER:Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

24. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer­cial, rental, or institutional setting.

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

3

Thank you for selecting the WESLO®CADENCE DX12
treadmill. The CADENCE DX12 treadmill combines ad­vanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique CADENCE DX12 can
be folded up, requiring less than half the floor space of
other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is WLTL31092. The serial
number can be found on a decal attached to the tread­mill (see the front cover of this manual for the location).

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Handrail

Console

Storage Latch

Key/Clip

Circuit

Breaker

Incline
Leg

Walking Belt

Hood

Cushioned Walking
Platform

Front Wheel

Foot Rails

Power Cord

Rear Roller
Adjustment Bolts

Water Bottle

Holder (Bottle

not included)

Towel Rack

Accessory Tray

RIGHT SIDE

LEFT SIDE

4

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small
parts used in assembly. Assembly requires the included allen wrench as well as your own phillips screw-

driver , two adjustable wrenches , and scissors .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the
Uprights (14) until the treadmill is in the position shown.

1

14

2. Insert one of the Extension Legs (41) into the treadmill as
shown. (Note: It may be helpful to tip the Uprights (14) in
the direction shown by the arrow as you insert the
Extension Leg.) Make sure that the Base Pad (36) is on
the bottom of the Extension Leg. Attach the Extension
Leg with an Extension Leg Screw (34). Push on the

head of the Extension Leg Screw while tightening it.

Attach the other Extension Leg (41) in the same way.

34

41

14

36

2

5

Handrail Bolt (15)–2

Handrail Washer (16)–2

Handrail Nut (82)–2

Extension Leg Screw (34)–2

3 1/2" Handrail Bolt (59)–2

5/16" Washer (32)–2

Screw (55)–6

6. Attach the Storage Latch (12) to the left Upright (14) with
two Screws (55). Do not overtighten the Screws.

Tighten all of the bolts used in steps 3 and 4.

7. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
safe place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet,
place a mat under the treadmill.

55

12

14

6

4. Attach the lower end of the Right Handrail (57) to the
Extension Leg (41) with a Handrail Bolt (59), a Handrail
Washer (32), and a Handrail Nut (82) as shown. Do not
tighten the Handrail Bolt yet. Note: It may be neces­sary to push on the lower end of the Handrail to align the
hole in the Handrail with the hole in the Extension Leg.

Attach the Left Handrail to the left Extension Leg (not
shown) as described in steps 3 and 4. Note: There is not
a wire harness in the left Upright.

4

32

59

82

41

57

5. Place the Console Base (6) on the Handrails (2, 57).
Connect the two Wires (26) to the connectors in the
Console Base. Important: Make sure that the Wires

are fully inserted. WARNING: Do not disconnect or
connect the Wires while the treadmill power cord is
plugged in.

Thread four Screws (55) into the Handrails (2, 57) and
the Console Base (6). After all four Screws have been
started, tighten the Screws until they are snug; do

not overtighten the Screws.

55

26

Connectors

6

2

57

5

6

3. Refer to drawing 3a. If there is a plastic tie in the Cage
Nut (3) in the Right Handrail (57), remove the plastic tie.
Pull 6” of the Wire Harness (26) out of the Right Upright
(14). Route the Wire Harness up through the bracket on
the Right Handrail and out of the upper end as shown. (If
necessary, use needle-nose pliers to grip the end of the
Wire Harness.) Thread the included plastic tie through
the indicated holes in the Right Handrail.

Refer to drawing 3b. Look into the Right Handrail (57)
and make sure that the Wire Harness (26) is on the indi­cated side of the plastic tie. Then, tighten the plastic tie
and cut off the end.

Refer to drawing 3c. Insert the bracket on the Right
Handrail (57) into the right Upright (14), with the lower
end of the Right Handrail beside the Extension Leg (41).
Hand tighten a Short Handrail Bolt (15) with a Washer
(16) into the upper end of the Upright.

14

16

15

41

57

3c

26

57

3

14

Tie

3a

3b

26

57

Tie