Weslo Cadence 30.8 ct User Manual

Serial Number

Decal

USER'S MANUAL

Model No. WLTL38410
Serial No.

QUESTIONS?

If you have questions, or if there
are missing parts, we will guar­antee complete satisfaction
through direct assistance from
our factory.

TO AVOID UNNECESSARY DE­LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni­cians on our Customer Hot Line
will provide immediate assis­tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manual
for future reference.

®

30.8 CT

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with
eight feet of clearance behind it. Do not place
the treadmill on a surface that blocks any air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should be used only by persons
weighing 250 pounds or less.

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth­ing that could become caught in the treadmill.

Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 7),
plug the power cord into a surge suppressor
(not included) and plug the surge suppressor
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be on
the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that
is UL 1449 listed as a transient voltage surge
suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of
400 volts or less and a minimum surge dissi­pation of 450 joules. The surge suppressor
must be electrically rated for 120 volts AC and
15 amps. To purchase a surge suppressor, see
your local WESLO dealer or call 1-800-999­3756 and order part number 146148.

12. Keep the power cord and the surge suppres­sor away from heated surfaces.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See BE­FORE YOU BEGIN on page 4 if the treadmill is
not working properly.)

WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

2

The decal shown at the right has been placed on your treadmill.
If the decal is missing, or if it is not legible, please call our
Customer Service Department, toll-free, to order a free replace­ment decal (see ORDERING REPLACEMENT PARTS on the back
cover of this manual). Apply the decal in the location shown.

Note: The decal is shown at 38% of actual size.

14. Never start the treadmill while you are
standing on the walking belt. Always hold
the handrails or upper body arms while
using the treadmill.

15. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.

16. Never leave the treadmill unattended while
it is running. Always remove the key and un­plug the power cord when the treadmill is
not in use.

17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
AND MOVE THE TREADMILL on page 10.)
You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.

18. When folding or moving the treadmill, make

sure that the storage latch is fully closed.

19. Inspect and tighten all parts of the treadmill
every three months.

20. Never drop or insert any object into any
opening.

21.

DANGER:Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by
an authorized service representative.
Servicing other than the procedures in this
manual should be performed by an autho­rized service representative only.

22. This treadmill is intended for in-home use
only. Do not use this treadmill in any com­mercial, rental, or institutional setting.

WARNING:Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

3

Thank you for selecting the new WESLO®30.8 CT
treadmill. The 30.8 CT treadmill combines advanced
technology with innovative design to let you enjoy an
excellent form of cardiovascular exercise in the conve­nience and privacy of your home. And when you’re not
exercising, the unique 30.8 CT can be folded up, requir­ing less than half the floor space of other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free

at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is WLTL38410. The serial
number can be found on a decal attached to the tread­mill (see the front cover of this manual for the location).

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

4

Handrail

Upright

Storage Latch

Key/Clip

Circuit

Breaker

Walking Belt

Cushioned Walking Platform

for maximum exercise comfort

Foot Rail

Power

Cord

BACK

RIGHT SIDE

Rear Roller
Adjustment Bolts

Console

Water Bottle Holder

(Bottle not included)

Incline Leg

Upper Body Arms

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts
used in assembly. Assembly requires the following tools: The included allen wrench and your own

phillips screwdriver , mallet , wire cutters , and needle-nose
pliers .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the
Uprights (11) until the treadmill is in the position shown.

11

1

2. Insert one of the Extension Legs (34) into the treadmill as
shown. Make sure that the Base Pad (40) is on the indi­cated side. Note: It may be helpful to tip the Uprights (11)
in the direction shown by the arrow as you insert the
Extension Leg. To fully insert the Extension Leg, it may
be necessary to tap it with a mallet.

Attach the Extension Leg (34) with an Extension Leg
Screw (53). Be sure to push on the head of the

Extension Leg Screw while tightening it.

Attach the other Extension Leg (34) in the same way.

34

53

11

40

2

5

Extension Leg Screw (53)–2

Screw (99)–4

Latch Screw (35)–2

Handrail Bolt (105)–4

Handrail Washer (39)–4

5. Attach the Storage Latch (14) to the left Upright (11) with
the two Latch Screws (35). Be careful not to over-

tighten the Latch Screws.

6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor, place a
mat under the treadmill.

4. Place the Console Base (46) on the Right and Left
Handrails (1, 41). Make a loop with the indicated plastic
tie and insert the two Wires (21) through the loop. Pull out
just enough of the Wires to connect the Wires to the two
connectors in the Console Base. Important: Insert the
two Wires fully into the connectors. Then, tighten the
loop and cut off the excess plastic tie. WARNING: Never

disconnect or connect the Wires while the treadmill
power cord is plugged in.

Refer to drawing 4b. Thread four Screws (99) into the
Left and Right Handrails (1, 41) and the Console Base
(46). After all four Screws have been started, tighten the

Screws until they are snug; do not overtighten the
Screws.

Refer to step 3. Tighten the four Handrail Bolts (105).

35

11

14

5

3. Refer to the inset drawing. If there is a plastic tie holding
the Cage Nut (104) in the Right Handrail (1), remove the
plastic tie. Pull 4” to 5” of the Wire Harness (21) out of
the Right Upright (11). Feed the Wire Harness up
through the bracket on the Right Handrail and out of the
indicated hole. If necessary, use needle-nose pliers to grip
and pull the connectors on the Wire Harness.

Insert the bracket on the Right Handrail (1) into the upper
end of the right Upright (11). Hand tighten two Handrail
Bolts (105) with Washers (39) into the Upright as shown.

Attach the Left Handrail (41) to the left Upright (11) as
described above. Note: There is no wire in the left Upright.

21

41

39

39

39

1

105

105

105

11

11

34

39

105

3

99

99

1

1

Tie

46

46

41

4a

4b

21

1

104

11

Tie

6

21

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETMWALKING BELT

Your treadmill features a walking belt coated with
PERFORMANT LUBE

TM

, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat­form. Such substances will deteriorate the walking
belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home’s power.
Voltage surges, spikes, and noise interference can
result from weather conditions or from other appliances
being turned on or off. To decrease the possibility of

your treadmill being damaged, always use a surge
suppressor with your treadmill (see drawing 1 at
the right).

To purchase a surge suppressor, see your local
WESLO dealer or call 1-800-999-3756 and order part
number 146148. Use only a single-outlet surge sup-

pressor that is UL 1449 listed as a transient voltage
surge suppressor (TVSS). The surge suppressor must
have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps.

This product must be grounded. If it should malfunc­tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of elec­tric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropriate

outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Important: The treadmill is not compatible with
GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus­trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge suppressor to a 2-pole
receptacle as shown in drawing 2 if a properly
grounded outlet is not available.

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.

The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec­trician to determine if the outlet box cover is
grounded before using an adapter.

DANGER:Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service­man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.

1

2

Grounded Outlet Box

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

7

BATTERY INSTALLATION
The console requires two "AA" batteries (not in-

cluded). Alkaline batteries are recommended. Open
the battery cover as shown in the drawing at the upper
right. Insert two batteries into the battery compartment,
making sure that the negative (–) ends of the batteries
are touching the springs in the battery compartment.

Close the battery cover, push up on the battery cover
tab, and then push the tab forward as shown in the
inset drawing. Be sure that the tab locks into place.

STEP-BY-STEP CONSOLE OPERATION

Before operating the console, make sure that the
power cord is properly plugged in. (See HOW TO
PLUG IN THE POWER CORD on page 7.)

Stand on the foot rails of the
treadmill. Find the clip at­tached to the key and slide
the clip onto the waistband
of your clothing. Next, insert
the key into the console.

Test the clip by carefully
taking a few steps backward until the key is pulled
from the console. If the key is not pulled from the
console, adjust the position of the clip as needed.

CAUTION:Before operating the

console, read the following precautions.

• Do not stand on the walking belt when turn­ing on the power.

• Always wear the clip (see the drawing at
the lower right) while using the treadmill.
When the key is removed from the console,
the walking belt will stop.

• Adjust the speed in small increments.

• The training zones marked beside the
speed control are general guidelines only.
See page 14 for more information.

• To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console and use only a sealable
water bottle.

Battery

Cover

Tab

CONSOLE DIAGRAM

Note: If there is a thin sheet of clear
plastic on the face of the console,
remove it before operating the console.

Clip

Batteries

8

Follow the steps below to operate the console.

Insert the key fully into the power switch.

Inserting the key will
not turn on the dis­plays. The displays will
turn on when the
ON/RESET button is
pressed or when the
walking belt is started.
Note: If you just
installed batteries, the displays will already be on.

Reset the speed control and start the walking
belt.

Slide the speed control
down to the RESET
position. Note: Each

time the walking belt
is stopped, the speed
control must be
moved to the RESET
position before the
walking belt can be
restarted.

After you have moved the speed control to the
RESET position, slowly slide it upward until the
walking belt begins to move at slow speed.
Carefully step onto the walking belt and begin ex­ercising. Change the speed of the walking belt as
desired by sliding the speed control.

To stop the walking belt, step onto the foot rails
and slide the speed control to the RESET position.

Adjust the incline of the treadmill as desired.

To change the incline of
the treadmill, press the
top or bottom of the in­cline control until the
desired incline level is
reached.

Monitor your progress with the two displays.

TIME/DISTANCE dis­play—This display

shows the elapsed time
and the distance that
you have walked or
run, in miles. Every
seven seconds, the dis­play will change from one number to the other, as
shown by the arrows in the display.

CALS/FAT CALS/
SPEED display—This

display shows the ap­proximate numbers of
calories and fat calories
you have burned. (See
FAT BURNING on
page 14.) In addition, the display shows the speed
of the walking belt, in miles per hour. Every seven
seconds, the display will change from one number
to the next, as shown by the arrows in the display.

To reset the displays at
any time, press the
ON/RESET button.

When you are finished exercising, stop the
walking belt and remove the key.

Step onto the foot rails, slide the speed control to
the RESET position, and remove the key from the
console. The displays will turn off about five min­utes after the key is removed. Note: Any time that

the walking belt is stopped and the ON/RESET
button is not pressed for five minutes, the dis­plays will automatically turn off in order to con­serve the batteries.

5

4

3

2

1

Arrow

Arrow

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, unplug the power cord.

CAUTION: You must be able to safely lift 45 pounds (20
kg) to raise, lower, or move the treadmill.

1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend

your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the

vertical position.

2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the catch. If necessary, press the handrail to
the left. Make sure that the storage latch is fully en-

gaged over the catch.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor­age position in temperatures above 85° Fahrenheit.

Storage

Latch
Catch

Engaged

HOW TO USE THE UPPER BODY ARMS

As you exercise on the treadmill, you can hold either the
handrails or the upper body arms. The upper body arms are
designed to exercise your arms, shoulders, and back for a
total body workout. Hold one upper body arm with each
hand, and move them forward and back as you walk on the
treadmill.

To vary the intensity of your upper body exercise, the resis­tance of the upper body arms can be adjusted. To increase
the resistance, turn the resistance knobs clockwise; to de­crease the resistance, turn the knobs counterclockwise.

Upper Body

Arms

Resistance

Knobs

10

1111

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand

as shown. Using your left thumb, press the storage latch
and hold it. Pivot the treadmill until the frame and foot rail
are past the storage latch. If necessary, press the
handrail to the left.

2. Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. Do not drop the treadmill frame to

the floor. To decrease the possibility of injury, bend
your legs and keep your back straight.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor­age position as described on page 10. Make sure that the

storage latch is closed fully over the catch.

1. Hold the upper ends of the handrails. Place one foot on
the base as shown.

2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired loca­tion. To reduce the risk of injury, use extreme caution

while moving the treadmill. Do not move the treadmill
over an uneven surface.

3. Place one foot on the base, and carefully lower the tread­mill until it is resting in the storage position.

Storage

Latch

Unlatched

Base

Front Wheels

TROUBLE-SHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll­free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 7). Use only a single-outlet surge suppres­sor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor
must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation
of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps.

Important: The treadmill is not compatible with GFCI-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the circuit breaker has tripped. To reset

the circuit breaker, wait for five minutes and then

press the switch back in.

PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see the drawing

above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Make sure the wires under the console are fully plugged in. (See assembly step 4 on page 6. WARN-

ING: Do not disconnect or connect the wires while the treadmill power cord is plugged in.)
d. Unplug the power cord, wait for five minutes, and then plug the power cord back in.
e. Remove the key from the console. Reinsert the key fully into the console.

PROBLEM: The incline of the treadmill does not change when the incline control is pressed
SOLUTION: a. Make sure that the wires under the console are fully plugged in. (See assembly step 4 on page 6.

WARNING: Never disconnect or connect the wires while the power cord is plugged in.)

PROBLEM: The displays of the console do not function properly
SOLUTION: a. Check the batteries in the console. If the batteries need to be replaced, see BATTERY

INSTALLATION on page 8. Most problems are the result of drained batteries.
b. Remove the key from the console and UNPLUG

THE POWER CORD. Next, remove the screws from

the hood and carefully remove the hood. If neces-

sary, remove the left Resistance Knob (98) (see the

drawing at the bottom of page 13). Locate the Reed

Switch (44) and the Magnet (45) on the left side of

the Pulley (50). Turn the Pulley until the Magnet is

aligned with the Reed Switch. Make sure that the

gap between the Magnet and the Reed Switch is

about 1/8”. If necessary, loosen the Screw (33) and

move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for

a few minutes to check for a correct speed reading.

Tripped

Reset

c

45

44

33

Top

View

1/8”

50

b

12

Tripped

Reset

PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or
less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically
rated for 120 volts AC and 15 amps.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be­come damaged. Remove the key and UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller adjustment bolts counterclockwise, 1/4 of a
turn. When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 2 to
3 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in­sert the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.

c. If the walking belt still slows when walked on, call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt has shifted to the left, first re-

move the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the left rear roller bolt
clockwise 1/2 of a turn. Be careful not to overtighten
the walking belt. If the walking belt has shifted to
the right, turn the left rear roller bolt counterclockwise
1/2 of a turn. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until
the walking belt is centered.

b. If the walking belt slips when walked on, first remove

the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn both rear roller bolts clockwise,
1/4 of a turn. When the walking belt is correctly tight­ened, you should be able to lift each side of the walk­ing belt 2 to 3 inches off the walking platform. Be
careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the
treadmill for a few minutes. Repeat until the walking
belt is properly tightened.

PROBLEM: ONE OF THE UPPER BODY ARMS SQUEAKS DURING USE
SOLUTION: a. Correcting this problem requires a small amount of white marine grease, available at most hard-

ware stores.
Turn the Resistance Knob (98) counterclockwise until

it can be removed. Remove the Resistance Cone
(93) and the Upper Body Arm (89), along with the
3/8” Washers (57), Spring Washer (95), Thrust
Washers (96), and Thrust Bearing (97). (Note: If the
Resistance Sleeve [92] comes out of the Resistance
Bracket [91], press it back in.) Apply a thin layer of
white marine grease to the outer surface of the
Resistance Cone (93). Reattach all parts in the order
shown at the right.

b

a

Rear Roller Adjustment Bolts

2”–3”

b

13

93

92

91

89

98

96

95

57

57

97

a

CONDITIONING GUIDELINES

The following guidelines will help you to plan your ex­ercise program. For more detailed exercise informa­tion, obtain a reputable book or consult your physician.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the de­sired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom­mended heart rates for fat burning and aerobic exer­cise.

To find the proper heart rate for you, first find your age
on the left side of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers to
the right of your age. The three numbers are your
“training zone.” The lower two numbers are recom­mended heart rates for fat burning; the higher number
is the recommended heart rate for aerobic exercise.

Fat Burning

To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easily
accessible carbohydrate calories for energy. Only after
the first few minutes does your body begin to use
stored fat calories for energy. If your goal is to burn fat,
adjust the speed and incline of the treadmill until your
heart rate is near one of the lower two numbers in your
training zone. It may also be helpful to set the speed

control on the console to FAT BURN to help you main­tain the proper intensity level. (See page 9.)

Aerobic Exercise

If your goal is to strengthen your cardiovascular sys­tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone. It may also be helpful to set the speed control on
the console to AEROBIC to help you maintain the
proper intensity level. (See page 9.)

High Performance Athletic Conditioning

If your goal is high performance athletic conditioning,
set the speed control on the console to PERFOR­MANCE to help you maintain the proper intensity level.
(See page 9.) Note: During the first few weeks of your
exercise program, keep your heart rate near the low
end of your training zone.

HOW TO MEASURE YOUR HEART RATE

To measure your
heart rate, stop exer­cising and place two
fingers on your wrist
as shown. Take a
six-second heartbeat
count, and multiply
the result by ten to
find your heart rate.
(A six-second count is used because your heart rate
drops quickly when you stop exercising.) If your heart
rate is too high or too low, adjust the speed or incline
of the treadmill accordingly.

WORKOUT GUIDELINES

A well-rounded workout includes the following three
important parts:

A Warm-up

Start each workout with 5 to 10 minutes of stretching
and light exercise (see SUGGESTED STRETCHES on
page 15). A proper warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.

WARNING:Before beginning

this or any exercise program, consult your
physician. This is especially important for in­dividuals over the age of 35 or individuals
with pre-existing health problems.

14

Training Zone Exercise

After warming up, increase the intensity of your exer­cise until your pulse is in your training zone for 20 to
60 minutes. (During the first few weeks of your exer­cise program, do not keep your pulse in your training
zone for longer than 20 minutes.) Breathe regularly
and deeply as you exercise—never hold your breath.

A Cool-down

Finish each workout with 5 to 10 minutes of stretching

to cool down. This will increase the flexibility of your
muscles and will help to prevent post-exercise problems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be­tween workouts. After a few months, you may com­plete up to five workouts each week if desired.

The key to success is to make exercise a regular and
enjoyable part of your everyday life.

SUGGESTED STRETCHES

The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees, and
back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back,
and groin.

3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3
times for each leg. To cause further stretching of the achilles ten­dons, bend your back leg as well. Stretches: Calves, achilles ten­dons, and ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your but­tocks as possible. Hold for 15 counts, then relax. Repeat 3 times for
both legs. Stretches: Quadriceps and hip muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward. Pull
your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.

1

2

3

4

5

15

REMOVE THIS EXPLODED DRAWING

AND PART LIST FROM THE MANUAL

Save this EXPLODED DRAWING and PART LIST for future reference.

Note: Specifications are subject to change without notice. For information about
ordering replacement parts, see the back cover of the User’s Manual.

34

PART LIST—Model No. WLTL38410 R0801A

Key No. Qty. Description Key No. Qty. Description

1 1 Right Handrail
2 1 Key/Clip
3 2 Incline Leg Pivot Bolt
4 1 Battery Cover
5 2 Foot Rail
6 1 Lift Motor
7 1 Rear Roller
8 1 Speed Potentiometer

9 1 Speed Control Knob
10* 1 Console Assembly
11 1 Upright Base
12 1 Motor Belt
13 7 Small Screw
14 1 Storage Latch
15 5 Frame Pivot Spacer
16 7 8” Cable Tie
17 3 Incline Leg Pivot Nut
18 1 Pulley/Flywheel/Fan
19 1 Motor
20* 1 Motor/Pulley/Flywheel/Fan
21 1 Wire Harness
22 4 Belt Guide Screw
23 1 Motor Hood
24 1 Hood Shield
25 12 Small Screw
26 1 Controller
27 1 Motor Swivel Bolt
28 1 Motor Tension Nut
29 5 Small Star Washer
30 1 Motor Tension Washer
31 2 Motor Tension Bolt
32 1 Incline Stop Bracket
33 9 Belly Pan/Clip/Handrail Screw
34 2 Extension Leg
35 3 Latch Screw/Ground Screw
36 2 Wheel Bolt
37 2 Wheel
38 6 Wheel Nut/Lift Nut
39 11 Washer
40 4 Base Pad
41 1 Left Handrail
42 1 Latch Catch
43 1 Reed Switch Clip
44 1 Reed Switch
45 1 Magnet
46 1 Console Base
47 2 Front Isolator
48 4 Platform Screw
49 2 Isolator
50 1 Front Roller/Pulley
51 1 Front Roller Adj. Bolt
52 2 Incline Wheel
53 2 Extension Leg Screw
54 1 Power Cord
55 1 Power Cord Grommet
56 1 Circuit Breaker

57 6 3/8” Washer
58 2 Frame Pivot Bolt
59 1 Latch Decal
60 1 Motor Belly Pan
61 2 Cable Tie Clamp
62 2 Rear Platform Screw
63 3 Releasable Tie
64 1 Choke
65 2 Belt Guide
66 4 Belly Pan Fastener
67 1 Walking Belt
68 1 Walking Platform
69 1 Belly Pan
70 8 Electronics Screw
71 1 Incline Wire Harness
72 1 Upright Grommet
73 9 Isolator Screw
74 1 Allen Wrench
75 1 Frame
76 2 Front Endcap
77 2 Incline Wheel Bolt
78 4 Resistance Bracket Bolt
79 4 Incline Wheel Nut
80 1 Ground Wire
81 2 Hood Screw (Front)
82 1 Incline Leg
83 2 Rear Roller Adj. Bolt
84 1 Rear Endcap
85* 2 Extension Leg Assembly
86 2 Incline Motor Bolt
87 2 Belly Pan Screw
88 2 Foam Grip
89 1 Left Upper Body Arm w/Foam Grip
90 2 Resistance Bolt
91 2 Resistance Bracket
92 2 Resistance Sleeve
93 2 Resistance Cone
94 1 Right Upper Body Arm w/Foam Grip
95 2 Spring Washer
96 4 Thrust Washer
97 2 Thrust Bearing
98 2 Resistance Knob

99 4 Console Screw
100 1 Motor Belt Shield
101 1 Book Rack
102 2 Book Rack Screw
103 4 Star Washer
104 2 Cage Nut
105 4 Handrail Bolt

# 1 14” White Wire, M/F
# 1 5” Black Wire, 2 Ring
# 1 8” White Wire, Pigtail
# 1 User’s Manual

* Includes all parts shown in the box
# These parts are not illustrated

22

65

48

70

76

76

70

42

25

77

40

25

40

25

59

9

8

85*

78

39

25

24

56

25

70

100

99

105

39

104

99

105

39

104

2

46

10*

34

33

43

36

38

44

37

45

50

15

48

48

39

51

58

36

37

38

73

61

63

64

70

15

53

34

69

68

67

48

5

5

74

84

83

39

83

39

66

7

57

62

16

38

38

75

13

13

13

13

4

35

80

71

13

66

47

3

52

82

79

77

52

79

3

17

17

6

86

32

47

73

73

62

85*

86

87

90

91

92

98

95

57

97

96

93

89

88

98

92

93

57

96

97

95

90

91

88

94

57

57

41

103

61

101

102

29

29

29

103

39

39

12

17

20*

21

25

27

19

18

31

30

29

11

23

81

25

70

53

40

33

33

33

60

33

33

26

40

28

55

54

25

25

33

35

14

35

72

39

39

105

1

105

49

73

49

73

78

39

EXPLODED DRAWING—Model No. WLTL38410 R0801A

Part No. 176288 R0801A Printed in USA © 2001 ICON Health & Fitness, Inc.

ORDERING REPLACEMENT PARTS

To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give
the following information:

• The MODEL NUMBER OF THE PRODUCT (WLTL38410)

• The NAME OF THE PRODUCT (WESLO

®

30.8 CT treadmill)

• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)

• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the EXPLODED DRAWING and PART LIST
attached in the center of this manual).

If possible, place the treadmill near your telephone for easy reference when calling.

LIMITED WARRANTY

ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur­chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim­ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service
centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of pur­chase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal
usage or repairs not provided by an ICON authorized service center, to products used for commercial or
rental purposes, or to products used as store display models. No other warranty beyond that specifically
set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con­nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in­cidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly,
the above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

WESLO is a registered trademark of ICON Health & Fitness, Inc.