WEN 49036 User Manual

TABLE OF CONTENTS

Specifications….................................................................................. 2

Safety Instructions.............................................................................. 3

Know Your Screwdriver……………………………………………. 6

Operation............................................................................................. 7

Maintenance........................................................................................ 9

Warranty ............................................................................................. 10

SPECIFICATIONS

3.6 V Screwdriver Item: 49036

Motor: 3.6Volt DC
Speed (no load): 200RPM
Bit size: 1/4" hex collet
Max torque: 34 in.lbs
Battery capacity: 1.3 Ah lithium ion
Charge time: 3-5 hours
Charger input: 120Volt, 60Hz AC only
Weight: 1.32 lbs

WARNING: Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

2



SAFETY INSTRUCTIONS

GENRAL SAFETY RULES

WARNING! Read all safety warnings and instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and / or serious injury.

Save all warnings and instructions for future reference.

WORK AREA SAFETY

1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the pr esence of flam mable liquids, gases

or dust. Power tools create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Power tool plugs must match the outlet. N ever modify the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric

shock.

2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock.

5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool

while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating

power tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.

3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power sourc e

and / or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or
energising in power tools that have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal injury.

5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power

tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing an d gl ove s away from

moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are

connected and properly used. Use of these devices can reduce dust-related hazards.

3

