WEE
W
N
N
®
®
OOppeerraattiioonn//IInnssttrruuccttiioonn MMaannuuaall
HHeeaatt GGuunn KKiitt
MMooddeell ##22001100
YYoouurr nneeww ttooooll hhaass bbeeeenn eennggiinneeeerreedd aanndd mmaannuuffaaccttuurreedd ttoo WWEENN’’ss®® hhiigghh
ssttaannddaarrddss ffoorr ddeeppeennddaabbiilliittyy,, eeaassee ooff ooppeerraattiioonn,, aanndd ooppeerraattoorr ssaaffeettyy..
l
PPrrooppeerrllyy ccaarreedd ffoorr,, iitt wwiilll
ppeerrffoorrmmaannccee..
ggiivvee yyoouu yyeeaarrss ooff rruuggggeedd,, ttrroouubbllee--ffrreeee
CCAAUUTTIIOONN:
:
CCaarreeffuullllyy rreeaadd tthhrroouugghh tthhiiss eennttiirree ooppeerraattoorr’’ss
mmaannuuaall bbeeffoorree uussiinngg yyoouurr nneeww ttooooll..
PPaayy cclloossee aatttteennttiioonn ttoo tthhee RRuulleess ffoorr SSaaffee OOppeerraattiioonn,, WWaarrnniinnggss,, aanndd CCaauuttiioonnss..
f yyoouu uussee yyoouurr ttooooll pprrooppeerrllyy aanndd oonnllyy ffoorr wwhhaatt iitt iiss iinntteennddeedd,, yyoouu wwiillll eennjjooyy
IIf
yyeeaarrss ooff ssaaffee,, rreelliiaabbllee sseerrvviiccee..
SSAAVVEE TTHHIISS MMAANNUUAALL FFOORR FFUUTTUURREE RREEFFEERREENNCCEE
TTAABBLLEE OOFF CCOONNTTEENNTTSS
SECTION PAGE
SECTION
TTeecchhnniiccaall DDaattaa
RRuulleess ffoorr SSaaffee OOppeerraattiioonn
GGeenneerraall IInnssttrruuccttiioonnss ffoorr AAllll PPoowweerr TToooollss
EExxtteennssiioonn CCoorrddss
OOppeerraattiinngg yyoouurr HHeeaatt GGuunn
PPaarrttss LLiisstt
DDiiaaggrraamm
WWaarrrraannttyy
MMooddeell NNuummbbeerr::
RRaattiinngg::
IInnppuutt::
WWaattttaaggee::
TTwwoo hheeaatt sseettttiinnggss::
PPaacckkaaggee ccoonntteennttss:: HHeeaatt GGuunn,, 44 nnoozzzzllee ddeefflleeccttoorrss,, 55 ppcc ppaaiinntt ssccrraappeerr kkiitt,,
iinnssttrruuccttiioonn mmaannuuaall aan
TTEECCHHNNIICCAALL DDAATTAA
ndd bbllooww mmoolldd ccaassee..
22001100
112200VV AACC ~~ 6600HHzz
66..00//1122..55AAmmppss
11000000((llooww))//11550000((hhiigghh))
LLooww ((77000
HHiigghh ((99220
PAGE
22
33
44
99
1100
1111
1111
1122
o
o
0
FF))
o
o
0
FF))
FFoorr qquueessttiioonnss oorr pprroobblleemmss rreeggaarrddiinngg tthhiiss pprroodduucctt,, pplleeaassee
o
nnttaacctt oouurr CCuussttoommeerr SSeerrvviiccee DDeeppaarrttmmeenntt aatt ((888888)) 331155--33008800
cco
MM--FF 88--55 CCSSTT oorr bbyy eemmaaiill:
partsandservice@wenproducts.com
:
partsandservice@wenproducts.com
2
RRuulleess ffoorr SSaaffee OOppeerraattiioonn
TThhee ppuurrppoossee ooff ssaaffeettyy ssyymmbboollss iiss ttoo aattttrraacctt yyoouurr aatttteennttiioonn ttoo ppoossssiibbllee
ddaannggeerrss.. TThhee ssaaffeettyy ssyymmbboollss,, aanndd tthhee eexxppllaannaattiioonnss wwiitthh tthheemm,, ddeesseerrvvee yyoouurr
ccaarreeffuull aatttteen
nttiioonn aanndd uunnddeerrssttaannddiinngg.. TThhee ssaaffeettyy wwaarrnniinnggss ddoo nnoott bbyy
tthheemmsseellvveess eelliimmiinnaattee aannyy ddaannggeerr.. TThhee iinnssttrruuccttiioonnss oorr wwaarrnniinnggss tthheeyy ggiivvee aarree
nnoott ssuubbssttiittuutteess ffoorr pprrooppeerr aacccciiddeenntt pprreevveennttiioonn mmeeaassuurreess..
SSyymmbbooll
MMeeaanniinngg
SSaaffeettyy AAlleerrtt SSyymmbbooll::
IInnddiiccaatteess ddaannggeerr,, wwaarrnniinngg,, oorr ccaauuttiioonn,, mmaayy bbee uusseedd iinn
ccoonnjjuunnccttiioonn wwiitthh ootthheerr ssyymmbboollss oorr ppiiccttooggrraapphhss.. AAllwwaayyss ffoollllooww
tthhee ssaaffeettyy pprreeccaauuttiioonnss ttoo rreedduuccee tthhee rriisskk ooff ffiirree,, eelleeccttrriicc
sshhoocckk aanndd ppeerrssoonnaall iinnjjuurryy..
NNoottee::
AAddvviisseess yyoouu ooff iinnffoorrmmaattiioonn oorr iinnssttrruuccttiioonnss vviittaall ttoo tthhee ooppeerraattiioonn
oorr mmaaiinntteennaannccee ooff tthhee eeqquuiippmmeenntt
IIMMPPOORRTTAANNTT
SSeerrvviicciinngg rreeqquuiirreess eexxttrreemmee ccaarree aanndd kknnoowwlleeddggee aanndd sshhoouulldd bbee ppeerrffoorrmmeedd
oonnllyy bbyy aa qquuaalliiffiieedd sseerrvviiccee tteecchhnniicciiaann.. FFoorr sseerrvviiccee,, wwee ssuuggggeesstt yyoouu rreettuurrnn tthhee
ttooooll ttoo WWEENN PPRROODDUUCCTTSS aa ddiivviissiioonn ooff GGrreeaatt LLaakkeess TTeecchhnnoollooggiieess,, LLLLCC.. ffoorr
rreeppaaiirr.. WWhheenn sseerrvviicciinngg,, uussee oonnllyy iiddeennttiiccaall WWEENN®® rreeppllaacceemmeenntt ppaarrttss..
WWAARRNNIINNG
DDoo nnoott aatttteemmpptt ttoo ooppeerraattee tthhiiss ttooooll uunnttiill yyoouu hhaavvee rreeaadd tthhoorroouugghhllyy aanndd uunnddeerrssttaan
ccoommpplleetteellyy aallll iinnssttrruuccttiioonnss,, ssaaffeettyy rruulleess,, eettcc……ccoonnttaaiinneedd iinn tthhiiss mmaannuuaall.. FFaai
ccoommppllyy ccaann rreessuulltt iinn aacccciiddeennttss iinnvvoollvviinngg ffiirree,, eelleeccttrriicc sshhoocckk,, oorr sseerriioouuss ppeerrs
iinnjjuurryy.. SSaavvee tthhiiss ooppeerraattoorr’’ss mmaannuuaall aanndd rreevviieeww ffrreeqquueennttllyy ffoorr ccoonnttiinnuuiinngg ssaaffe
ooppeerraattiioonn aanndd iinnssttrruuccttiinngg ootthheerrss wwhhoo mmaayy uussee tthhiiss ttooooll..
G
::
i
lluurree ttoo
s
oonnaall
e
n
dd
SSaaffee ooppeerraattiioonn ooff tthhiiss ppoowweerr ttooooll rreeqquuiirreess tthhaatt yyoouu rreeaadd aanndd uunnddeerrssttaanndd tthhiiss
erraattoorr’’ss mmaannuuaall aanndd aallll llaabbeellss aaffffiixxeedd ttoo tthhee ttooooll.. SSaaffeettyy iiss aa ccoommbbiinnaattiioonn
ooppe
ooff ccoommmmoonn sseennssee,, ssttaayyiinngg aalleerrtt,, aanndd kknnoowwiinngg hhooww yyoouurr ttooooll wwoorrkkss..
3
GGEENNEERRAALL IINNSSTTRRUUCCTTIIOONNSS
FFOORR AALLLL PPOOWWEERR TTOOOOLLSS
RREEAADD AALLLL IINNSSTTRRUUCCTTIIOONNSS!!!!!!
Know your power tool. Read the operator’s manual carefully. Learn
Know your power tool. Read the operator’s manual carefully. Learn
the application and limitations as well as specific potential hazards
the application and limitations as well as specific potential hazards
related to this tool.
related to this tool.
Keep guards in place and in working order. Never operate the tool
Keep guards in place and in working order. Never operate the tool
with any guard or cover removed
with any guard or cover removed. Make sure all guards are operating
properly before each use.
properly before each use.
Remove adjusting keys & wrenches. Form a habit of checking to see
Remove adjusting keys & wrenches. Form a habit of checking to see
keys and adjusting wrenches are removed from tool before turning it
keys and adjusting wrenches are removed from tool before turning it
on.
on.
Keep work area clean. Cluttered work areas and work benches invite
Keep work area clean. Cluttered work areas and work benches invite
accidents.
accidents.
Do not use in dangerous environments. Do not use power tools near
Do not use in dangerous environments. Do not use power tools near
gasoline or other flammable liquids, in damp or wet locations or expose
gasoline or other flammable liquids, in damp or wet locations or expose
them to rain. Keep work area well lighted.
them to rain. Keep work area well lighted.
Keep children and visitors away. All visitors should wear ANSI-Z87.1
Keep children and visitors away. All visitors should wear ANSI-Z87.1
approved safety glasses and be kept a safe distance from work area.
approved safety glasses and be kept a safe distance from work area.
Make workshop childproof with padlocks, master switches, or by
Make workshop childproof with padlocks, master switches, or by
removing starter keys.
removing starter keys.
Don’t force the tool. It will do the job better and safer at the rate
Don’t force the tool. It will do the job better and safer at the rate
for which it was designed
for which it was designed.
Use the right tool. Do not force the tool or attachment to do a job
Use the right tool. Do not force the tool or attachment to do a job
for which it was not designed.
for which it was not designed.
.
. Make sure all guards are operating
4
Wear proper apparel. Do not wear loose clothing, neckties, or jewelry
Wear proper apparel. Do not wear loose clothing, neckties, or jewelry
that can get caught in the tool’s moving parts and cause personal
that can get caught in the tool’s moving parts and cause personal
injury. Non-slip footwear is recommended when working outdoors.
injury. Non-slip footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
Wear protective hair covering to contain long hair.
Always wear ANSI-Z87.1 approved safety glasses with sid
Always wear ANSI-Z87.1 approved safety glasses with side shields.
Everyday eyeglasses have only impact-resistant lenses; they are NOT
Everyday eyeglasses have only impact-resistant lenses; they are NOT
safety glasses.
safety glasses.
Secure work. Use clamps or a vise to hold work when practical. It’s
Secure work. Use clamps or a vise to hold work when practical. It’s
safer than using your hand and it frees both hands to operate the
safer than using your hand and it frees both hands to operate the
tool.
tool.
Do not overreach. Keep proper footing and balance at all times.
Maintain tools with care. Keep tools sharp and clean for best and
Maintain tools with care. Keep tools sharp and clean for best and
safest performance. Follow instructions for lubricating and changing
safest performance. Follow instructions for lubricating and changing
accessories.
accessories.
Disconnect all tools. When not in use, before servicing, or when
Disconnect all tools. When not in use, before servicing, or when
changing attachments, blades, bits, cutters, etc…, all tools should be
changing attachments, blades, bits, cutters, etc…, all tools should be
disconnected from power source.
disconnected from power source.
Reduce the risk of unintentional starting. Be sure switch is off when
Reduce the risk of unintentional starting. Be sure switch is off when
plugging in.
plugging in.
Use recommended accessories. Consult the operator’s manual for
Use recommended accessories. Consult the operator’s manual for
reco
mmended accessories. The use of improper accessories may
recommended accessories. The use of improper accessories may
cause risk of injury.
cause risk of injury.
Never stand on tool. Serious injury could occur if the tool is tipped or
Never stand on tool. Serious injury could occur if the tool is tipped or
if the drill is unintentionally contacted.
if the drill is unintentionally contacted.
Never leave tool running unattended. Turn power off. Don’t leave tool
Never leave tool running unattended. Turn power off. Don’t leave tool
until it comes to a complete stop.
until it comes to a complete stop.
Check damaged parts. Before further use of the tool, a guard or
Check damaged parts. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine
other part that is damaged should be carefully checked to determine
e shields.
Do not overreach. Keep proper footing and balance at all times.
5
that it will operate properly and perform its intended function. Check
that it will operate properly and perform its intended function. Check
for alignment of moving parts, binding or moving parts, breakage of
for alignment of moving parts, binding or moving parts, breakage of
parts, mounting and any other conditions that may affect its
parts, mounting and any other conditions that may affect its
operation. A guard or other part that is damaged must be properly
operation. A guard or other part that is damaged must be properly
repaired or replaced by an authorized service center to avoid risk of
repaired or replaced by an authorized service center to avoid risk of
personal injury.
personal injury.
Protect your hearing. Wear hearing protection during extended
Protect your hearing. Wear hearing protection during extended
periods of operation.
periods of operation.
Keep tools dry, clean, and free from oil and grease. Always use a clean
Keep tools dry, clean, and free from oil and grease. Always use a clean
cloth when cleaning. Never use brake fluids, gasoline, petroleum-
cloth when cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any solvents to clean tool.
based products, or any solvents to clean tool.
PROTECT YOUR LUNGS. Wear a face or dust mask if the operation
PROTECT YOUR LUNGS. Wear a face or dust mask if the operation
is dusty.
is dusty.
WWAARRNNIINNGG:
ddrriilllliinngg,, aanndd ootthheerr ccoonnssttrruuccttiioonn aaccttiivviittiieess ccoonnttaaiinnss cchheemmiiccaallss kknnoowwnn ttoo ccaauussee
ccaanncceerr,, bbiirrtthh ddeeffeeccttss oorr ootthheerr rreepprroodduuccttiivvee hhaarrmm.. SSoommee eexxaammpplleess ooff tthheessee
cchheemmiiccaallss aarree::
Lead from lead-based paints
Crystalline silica from bricks and cement and other masonry products
Arsenic and chromium from chemically treated lumber
YYoouurr rriisskk ffrroomm tthheessee eexxppoossuurreess vvaarriieess,, ddeeppeennddiinngg oonn hhooww oofftteenn yyoouu ddoo tthhiiss
ttyyppee ooff wwoorrkk.. TToo rreedduuccee yyoouurr eexxppoossuurree ttoo tthheessee cchheemmiiccaallss,, wwoorrkk iinn aa wweellll
vveennttiillaatteedd aarreeaa,, aanndd wwoorrkk wwiitthh aapppprroovveedd ssaaffeettyy eeqquuiippmmeenntt,, ssuucchh aass tthhoossee
dduusstt mmaasskk tthhaatt aarree ssppeecciiaallllyy ddeessiiggnneedd ttoo ffiilltteerr oouutt mmiiccrroossccooppiicc ppaarrttiicclleess..
Guard against electrical shock by preventing body contact with
Guard against electrical shock by preventing body contact with
grounded surfaces. For example: pipes, radiators, ranges,
grounded surfaces. For example: pipes, radiators, ranges,
refrigerator enclosures.
refrigerator enclosures.
Inspect tool cords and extension cords periodically and, if damaged,
Inspect tool cords and extension cords periodically and, if damaged,
have repaired by a qualified service technician. Stay constantly aware
have repaired by a qualified service technician. Stay constantly aware
of cord location and keep it away from the rotating wheel.
of cord location and keep it away from the rotating wheel.
:
SSoommee dduusstt ccrreeaatteedd bbyy ppoowweerr ssaannddiinngg,, ssaawwiinngg,, ggrriinnddiinngg,,
Lead from lead-based paints
Arsenic and chromium from chemically treated lumber
Crystalline silica from bricks and cement and other masonry products
6
Never use in an explosive atmosphere. Normal sparking of the motor
Never use in an explosive atmosphere. Normal sparking of the motor
could ignite fumes.
could ignite fumes.
Use only outdoor extension cords with approved ground connection
Use only outdoor extension cords with approved ground connection
that are intended for use outdoors and so marked.
that are intended for use outdoors and so marked.
Avoid awkward operations and hand positions where a sudden slip
Avoid awkward operations and hand positions where a sudden slip
could cause your hand to move into the drill. ALWAYS make sure you
could cause your hand to move into the drill. ALWAYS make sure you
have good balance.
have good balance.
Allow the motor to come up to full speed before starting a cut to
Allow the motor to come up to full speed before starting a cut to
avoid binding or stalling
avoid binding or stalling
Do not use tool if switch does not turn it on and off. Have defective
Do not use tool if switch does not turn it on and off. Have defective
switches replaced by an authorized service center.
switches replaced by an authorized service center.
Replacement parts. All repairs, whether electrical or mechanical,
Replacement parts. All repairs, whether electrical or mechanical,
should be made by a qualified service technician at an authorized
should be made by a qualified service technician at an authorized
service center.
service center.
WWAARRNNIINNGG:
ppaarrttss.. UUssee ooff aannyy ootthheerr ppaarrttss mmaayy ccrreeaattee aa hhaazzaarrdd oorr ccaauussee pprroodduucctt ddaammaaggee..
Keep hands away from working area. Do not hand hold pieces so small
Keep hands away from working area. Do not hand hold pieces so small
that your fingers go under the drill. Do not reach underneath work or
that your fingers go under the drill. Do not reach underneath work or
in drill path with your hands and fingers for any reason.
in drill path with your hands and fingers for any reason.
Before making a drill, be sure all adjustments are secure.
Do not remove jammed cutoff pieces until drill has stopped.
Never start the tool when the drill is in contact with the work piece.
Never touch drill or other moving parts during use.
:
wwhheenn sseerrvviicciinngg uussee oonnllyy iiddeennttiiccaall WWEENN®® rreeppllaacceemmeenntt
Before making a drill, be sure all adjustments are secure.
Do not remove jammed cutoff pieces until drill has stoppe
d.
Never touch drill or other moving parts during use.
Never start the tool when the drill is in contact with the work piece.
7
Before changing the setup, removing covers, guards or blades, unplug
Before changing the setup, removing covers, guards or blades, unplug
the tool and remove the switch key.
the tool and remove the switch key.
Always turn off tool before disconnecting it to avoid accidental
Always turn off tool before disconnecting it to avoid accidental
starting when reconnecting to a power source.
starting when reconnecting to a power source.
DDOO NNOOTT OOPPEERRAATTEE TTHHIISS TTOOOOLL WWHHIILLEE UUNNDDEERR TTHHEE
IINNFFLLUUEENNCCEE OOFF DDRRUUGGSS,, AALLCCOOHHOOLL OORR AANNYY MMEEDDIICCAATTIIOONN
TTHHAATT MMAAYY IIMMPPAAIIRR YYOOUURR JJUUDDGGMMEENNTT OORR CCOONNTTRROOLL!!
Stay alert and exercise control. Watch what you are doing and use
Stay alert and exercise control. Watch what you are doing and use
common sense. DO NOT operate tool when you are tired. DO NOT
common sense. DO NOT operate tool when you are tired. DO NOT
RUSH!
RUSH!
Make sure work area has ample lighting to see the work and that no
Make sure work area has ample lighting to see the work and that no
obstructions will interfere with safe operation BEFORE performing
obstructions will interfere with safe operation BEFORE performing
any work using your drill.
any work using your drill.
Save these instructions. Refer to them frequently and use them to
Save these instructions. Refer to them frequently and use them to
instruct other users. If you loan someone this tool, loan them these
instruct other users. If you loan someone this tool, loan them these
instructions also.
instructions also.
Use the proper extension cord. Make sure your extension cord is in
Use the proper extension cord. Make sure your extension cord is in
good condition. When using an extension cord, be sure to use one
good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product wil
heavy enough to carry the current your product will draw. An
undersized cord will cause a drop in line voltage resulting in loss of
undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. A wire gauge size (A.W.G.) of at least 16 is
power and overheating. A wire gauge size (A.W.G.) of at least 16 is
recommended for an extension cord 25 feet or less in length. If in
recommended for an extension cord 25 feet or less in length. If in
doubt, use the next heavier gauge. The smaller the gauge number, the
doubt, use the next heavier gauge. The smaller the gauge number, the
heavier the cord.
heavier the cord.
Don’t abuse cord. Never carry tool by the cord or yank it to
Don’t abuse cord. Never carry tool by the cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and sharp
disconnect from receptacle. Keep cord from heat, oil, and sharp
edges.
edges.
l draw. An
8
EEXXTTEENNSSIIOONN CCOORRDDSS
IInn tthhee eevveenntt ooff aa mmaallffuunnccttiioonn oorr bbrreeaakkddoowwnn,, ggrroouunnddiinngg pprroovviiddeess aa ppaatthh oorr
lleeaasstt rreessiissttaannccee ffoorr eelleeccttrriicc ccuurrrreenntt aanndd rreedduucceess tthhee rriisskk ooff eelleeccttrriiccaall
sshhoocckk.. TToooollss eeqquuiippppeedd wwiitthh aann eelleeccttrriiccaall ccoorrdd hhaavviinngg aann eeqquuiippmmeenntt--ggrroouunnddiinngg
ccoonndduuccttoorr mmuusstt bbee pplluuggggeedd iinnttoo aa mmaattcchhiinngg oouuttlleett tthhaatt iiss pprrooppeerrllyy iinnssttaalllleedd
aanndd ggrroouunnddeedd iinn aaccccoorrddaannccee wwiitthh aallll llooccaall ccooddeess aanndd oorrddiinnaanncceess..
DDoo nnoott mmooddiiffyy tthhee pplluugg pprroovviiddeedd iinn aannyy wwaayy.. IIff tthhee pplluugg ddooeess nnoott ffiitt tthhee
oouuttlleett,, hhaavvee tthhee pprrooppeerr oouuttlleett iinnssttaalllleedd bbyy aa qquuaalliiffiieedd eelleeccttrriicciiaann..
TThhee uussee ooff aannyy eexxtteennssiioonn ccoorrdd wwiillll ccaauussee ssoommee lloossss ooff ppoowweerr.. TToo kkeeeepp tthhiiss ttoo
aa mmiinniimmuumm aanndd ttoo pprreevveenntt oovveerrhheeaattiinngg aanndd mmoottoorr bbuurrnn--oouutt;; uussee tthhee ttaabbllee
bbeellooww ttoo ddeetteerrmmiinnee tthhee mmiinniimmuumm wwiirree ssiizzee ((AA..WW..GG..)) eexxtteennssiioonn ccoorrdd..
UUssee oonnllyy tthhrreeee ((33)) wwiirree eexxtteennssiioonn ccoorrddss tthhaatt hhaavvee tthhrreeee ((33)) pprroonngg ggrroouunnddiinngg
pplluuggss,, aanndd tthhrreeee ((33)) ppoollee rreecceeppttaacclleess tthhaatt aacccceepptt tthhee ttooooll’’ss pplluugg..
AAMMEERRIICCAANN WWIIRREE GGAAUUGGEE RRAATTIINNGG CCHHAARRTT
EEXXTTEENNSSIIOONN CCOORRDD
LLEENNGGTTHH ((FFEEEETT))
AAMMPPSS
00 ttoo 1100..00
1100..11 ttoo 1133..00
1133..11 ttoo 1155
1155 ttoo 1188
2255 5500 7755 110000 112255 115500 117755 220000
AAWWGG
1188 1188 1166 1166
1166 1166 1144 1144
1144 1122 1122 1122
1144 1122 1122 1122
1144
1144
1122
1122
1144 1122 1122
1122 1122 1122
1122 1122 NNAA
1122 NNAA NNAA
9
OOPPEERRAATTIINNGG YYOOUURR HHEEAATT GGUUNN
TThhee WWEENN®® 22--SSppeeeedd HHeeaatt GGuunn KKiitt iiss aa lliigghhttwweeiigghhtt aanndd eeaassyy ttoo uussee
pprroodduucctt aanndd iiss ggrreeaat
992200°°FF.. TThhiiss vveerrssaattiillee ddeevviiccee sst
ssoofftteennss aaddhheessiivveess ffoorr rreemmoovvaall ooff lliinnoolleeuumm aanndd fflloooorr ttiillee aanndd qquuiicckk ddrriieess
aallmmoosstt aannyytthhiinngg.. TThhiiss kkiitt iinncclluuddeess aann iimmppa
ooff 44 nnoozzzzlleess aanndd 55 ssccrraappeerrss..
t ffoorr hhoommee uusseerrss.. IItt hhaass 22 hheeaatt sseettttiinnggss,, 770000°°FF aanndd
trriippss ppaaiinntt aanndd vvaarrnniisshh,, tthhaawwss ffrroozzeenn ppiippeess,,
acctt rreessiissttaanntt ccaassee wwiitthh aa sseelleeccttiioonn
UUssaaggee
1.
1.
2.
2.
3.
3.
CCaauuttiioonn
1.
1.
2.
2.
3.
3.
Securely insert the plug of the Heat Gun into the AC 120V 60Hz
Securely insert the plug of the Heat Gun into the AC 120V 60Hz
receptacle.
receptacle.
The Heat Gun starts working when the switch is pushed upward to
The Heat Gun starts working when the switch is pushed upward to
position “Π” for a high temperature setting or downward to position “Ι”
position “Π” for a high temperature setting or downward to position “Ι”
for a low temperature setting.
for a low temperature setting.
The Heat Gun stops working when the switch is pushed to position “O”. It
The Heat Gun stops working when the switch is pushed to position “O”. It
can be safely stored in the blow mold case once the unit has had some
can be safely stored in the blow mold case once the unit has had some
time to cool down.
time to cool down.
Do not block the air inlet and outlet of the heat gun.
Never use this tool in the presence of flammable or combustible
Never use this tool in the presence of flammable or combustible
materials.
materials.
Do not drop or use this tool to hit other objects. Do not insert sharp
Do not drop or use this tool to hit other objects. Do not insert sharp
objects into the air inl
objects into the air inlet/outlet or pierce or jab internal parts.
et/outlet or pierce or jab internal parts.
Do not block the air inlet and outlet of the heat gun.
10
PA
P
ARRTTSS LLIISSTT // DDIIAAGGRRAAMM
PPAARRTTSS LLIISSTT // DDIIAAGGRRAAMM
11
LLiimmiitteedd OOnnee--YYeeaarr WWaarrrraannttyy
WWEENN PPrroodduuccttss,, aa ddiivviissiioonn ooff GGrreeaatt LLaakkeess TTeecchhnnoollooggiieess,, LLLLCC.. wwaarrrraannttss iittss
ppoowweerr t
ppeerriioodd ooff oonnee yyeeaar
aatt oouurr ooppttiioonn,, aannyy ttooooll ccoovveerreedd bbyy tthhiiss wwaarrrraannttyy tthhaatt aafftteerr iinnssppeeccttiioonn iiss
ffoouunndd ttoo bbee ddeeffeeccttiivvee iinn mmaatteerriiaallss oorr wwoorrkkmmaannsshhiipp dduurriinngg tthhee wwaarrrraannttyy
ppeerriioodd..
TThhiiss wwaarrrraannttyy ddooeess nnoott aappppllyy iiff tthhee ttooooll hhaass bbeeeenn mmiissuusseedd,, aabbuusseedd,, ssuubbjjeecctt
ttoo aann aacccciiddeenntt,, aalltteerreedd,, rreeppaaiirreedd bbyy ootthheerrss nnoott aauutthhoorriizzeedd aanndd iiss uusseedd iinn
ccoommmmeerrcciiaall oorr rreennttaall aapppplliiccaattiioonnss.. NNoorrmmaall wweeaarr aanndd tteeaarr iiss aallssoo nnoott ccoovveerreedd
bbyy tthhiiss wwaarrrraannttyy..
TToo ttaakkee aaddvvaannttaaggee ooff tthhiiss wwaarrrraannttyy,, pplleeaassee ccoonnttaacctt uuss aatt 11--888888--331155--33008800 oorr
wwrriittee ttoo uuss aatt 550011 DDaavviiss RRdd,, EEllggiinn,, IILL 6600112233.. YYoouu wwiillll nneeeedd pprrooooff ooff ppuurrcchhaassee
aanndd bbee aasskkeedd ttoo sshhiipp tthhee ttooooll bbaacckk ttoo uuss ffrreeiigghhtt pprreeppaaiidd..
UUnnddeerr nnoo cciirrccuummssttaanncceess sshhaallll WWEENN PPrroodduuccttss//GGrreeaatt llaakkeess TTeecchhnnoollooggiieess,, LLLLCC..
bbee lliiaabbllee ffoorr aannyy iinnddiirreecctt,, iinncciiddeennttaall oorr ccoonnsseeqquueennttiiaall ddaammaaggeess ffrroomm tthhee ssaallee
oorr uussee ooff tthhiiss pprroodduucctt.. SSoommee ssttaatteess ddoo nnoott aallllooww tthhee eexxcclluussiioonn oorr lliimmiittaattiioonn
ooff iinncciiddeennttaall oorr ccoonnsseeqquueennttiiaall ddaammaaggeess.. SSoommee ssttaatteess ddoo nnoott aallllooww lliimmiittaattiioonnss
oonn tthhee lleennggtthh ooff aann iimmpplliieedd wwaarrrraannttyy.. TThhiiss wwaarrrraannttyy pprroovviiddeess yyoouu wwiitthh
ssppeecciiffiicc lleeggaall rriigghhttss aanndd yyoouu mmaayy hhaavvee ootthheerr rriigghhttss tthhaatt vvaarryy ffrroomm ssttaattee ttoo
ssttaattee..
toooollss ttoo bbee ffrreeee ooff ddeeffeeccttss ffrroomm wwoorrkkmmaannsshhiipp aanndd mmaatteerriiaallss ffoorr aa
r ffrroomm ddaattee ooff oorriiggiinnaall ppuurrcchhaassee.. WWee wwiillll rreeppaaiirr oorr rreeppllaaccee,,
12
Loading...