MODEL 10165
65-FOOT LASER
DISTANCE MEASURE
IMPORTANT:
Your new device has been engineered and manufactured to WEN’s highest standards for dependability, ease of
operation, and operator safety. When properly cared for, this product will supply you years of rugged, troublefree performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your
device properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
TABLE OF CONTENTS
Specifications ........................................................................................... 2
Introduction ............................................................................................. 3
General Safety Rules ................................................................................ 4
Specific Safety Rules for the Laser Distance Measure ............................. 6
Know Your Laser Distance Measure ....................................................... 11
Operation ............................................................................................... 12
Maintenance ........................................................................................... 14
Troubleshooting Guide ........................................................................... 15
Exploded View & Parts List .................................................................... 16
Warranty Statement ............................................................................... 18
SPECIFICATIONS
Model Number 10165
Laser Type 650 nm, <1 mW
Laser Class II
Battery (2) AAA Batteries (not included)
Operating Temperature 14°F - 104°F
Measuring Distance 65 feet
Measuring Accuracy ±3.0 mm (1/8 inch)
Measuring Distance 0.16 - 65.5 feet
Weight 3.5 oz (with batteries)
Dimensions 1-5/8 x 1 x 4-3/8 inches
2
INTRODUCTION
Thanks for purchasing the WEN Laser Distance Measure. We know you are excited to put your device to work,
but first, please take a moment to read through the manual. Safe operation of this device requires that you read
and understand this operator’s manual and all the labels affixed to the device. This manual provides information
regarding potential safety concerns, as well as helpful assembly and operating instructions for your device.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations
with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the
risk of fire, electric shock and personal injury. However, please note that these instructions and warnings are
not substitutes for proper accident prevention measures.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
Keep this manual available to all users during the entire life of the device and review it frequently to maxi-
mize safety for both yourself and others.
3
SPECIFIC SAFETY RULES FOR THE LASER DISTANCE MEASURE
Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: Read and understand all warnings, cautions and operating instructions before using this
device. Failure to follow all instructions listed below may result in personal injury and device damage.
WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety
rules. Failure to follow the safety instructions may result in serious personal injury.
WARNING: Do not direct the laser beam at persons or animals. Do not stare into the direct or reflected
laser beam, not even from a distance. Looking into the laser beam or directing the laser beam into someone’s
eyes can cause eye damage, blindness, and cause accidents.
WARNING: LASER RADIATION. Class 2 laser. DO NOT STARE INTO THE BEAM.
1. Device purpose. This Laser Distance Measure is designed to measure distances, lengths, heights, clearances,
areas and volumes. The measuring tool can be used both indoors and outdoors. Using the device for any other
purpose for which it is not designed may result in serious injuries, dangerous radiation exposure, device damage,
and voiding of the warranty.
2. Never shine the laser in your eyes or the eyes of other people or animals. This can cause permanent damage
to eyes. Do not look directly into the laser beam with unprotected eyes. Never look into the path of the beam.
3. If laser radiation strikes your eye, you must deliberately close your eyes and immediately turn your head
away from the beam.
4. Never point the laser beam towards reflecting surfaces. Never point the laser towards people or animals. Even
a laser beam with a low output can cause damage to the eyes.
5. Do not allow children to use the laser measuring tool. They could unintentionally blind other persons or themselves.
6. Device inspection. Before operation, check the device and batteries for any damage or missing parts. Do not use
the device if any part is missing or damaged. Make sure all adjustments are correct and all connections are tight.
7. Do not try to open or disassemble your measuring device. Never open the laser module as unexpected exposure
to the beam can occur. The laser cannot be replaced with a different type of laser.
8. Cleaning. Never use solvents to clean plastic parts. Solvents could dissolve or otherwise damage the material.
Use only a soft damp cloth to clean plastic parts.
9. Do not make any modifications to the laser equipment. Have the measuring device repaired only by qualified
specialists.
4
SPECIFIC SAFETY RULES FOR THE LASER DISTANCE MEASURE
Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING: Read and understand all warnings, cautions and operating instructions before using this
device. Failure to follow all instructions listed below may result in personal injury and device damage.
WARNING: Do not let comfort or familiarity with the product replace strict adherence to product safety
rules. Failure to follow the safety instructions may result in serious personal injury.
WARNING: Do not direct the laser beam at persons or animals. Do not stare into the direct or reflected
laser beam, not even from a distance. Looking into the laser beam or directing the laser beam into someone’s
eyes can cause eye damage, blindness, and cause accidents.
WARNING: LASER RADIATION. Class 2 laser. DO NOT STARE INTO THE BEAM.
10. Replacements. Should any component of your Laser Distance Measure be missing/damaged or fail in any
way, turn the device off. Replace the missing, damaged, or failed parts using only identical replacement parts
before resuming operation.
11. Do not leave the switched-on measuring device unattended. Switch the measuring tool OFF after use. Other
persons could be blinded by the laser beam.
12. Protect the measuring device against moisture and direct sunlight. Store in a dry, shaded location. Do not
store at temperatures lower than 14°F or higher than 104°F.
13. Do not subject the measuring device to extreme temperatures or variations in temperature. For example,
do not leave the measuring device in cars for extended periods of time. In case of large variations in temperature,
allow the measuring tool to adjust to the ambient temperature before using it. The measuring device should stay
within the temperature range of 14°F - 104°F.
14. Avoid heavy impact and dropping of the measuring device. If the device is dropped or damaged, perform
an accuracy test before resuming operation. Replace the missing, damaged, or failed parts using only identical
replacement parts before resuming operation.
15. Remove the batteries before storing for an extended period of time.
16. DO NOT point the laser beam into the sky and/or at an aircraft.
These safety instructions can’t possibly warn of every scenario that may arise with this device,
always make sure to stay alert and use common sense during operation.
5
Loading...