Wells RW-16 User Manual
WELLS
W E L L S M A N U F A C T U R I N G
I T E M N O .
RW-16, RW-26, RW-36 BUILT-IN
DRAWER WARMERS
Wells Built-In Drawer Warmers can keep a variety of
foods hot and ready to serve. Their drawers accept all
standard 12” x 20” pans up to 6” deep, and are ideal
for warming dinner rolls, breads, tortilla chips and more.
All Wells warmers come with individual controls on each
drawer for temperature and humidity, so food can be
hot and crispy or warm and moist.
RW-16
Features
RW-16, RW-26, RW-36 BUILT-IN DRAWER WARMERS
Specifications
Overall Dimensions: Inches MM
Width 29 1/4 743
Depth 21 1/2 546
Height
RW-16 series
RW-26 series
RW-36 series
Temperature Range: Fahrenheit Celsius
RW Series 90º to 210º 32º to 99º
Pre-Heat Time to 175° F: 120V & 240V 208V
RW Series 15 minutes 22 minutes
Typical Capacity: Dinner Rolls
Individual drawer Approx. 8 doz.
Weights: Lbs. KG
RW-16 series:
Installed 51 23
Shipping 63 29
RW-26 series:
Installed 96 44
Shipping 120 54
RW-36 series:
Installed 155 70
Shipping 191 87
10 7/8 276
21 533
31 1/8 790
• Individual thermostatic temperature
control on each drawer gives these warmers
maximum versatility.
• Durable stainless steel tracks and bearings
provide for smooth operation.
• Adjustable front vent allows for humidity
control on each drawer.
• A stainless steel pan is provided with each
drawer warmer and is capable of holding a
standard 12” x 20” pan.
• Fully insulated for maximum efficiency.
• Models with optional built-in thermometer
(T) are NSF approved for potentially
hazardous foods.
• Heavy Duty (HD) models have reinforced
construction and are recommended for use with
heavier products such as potatoes.
• The RW series Drawer Warmers are
Underwriters Laboratories, Inc. LISTED and
meet the NSF International standards.
Export
The following models are available for export
and meet the standards for CE:
• RW-16EU, 220-240V, 1Ø, 450 watts, 22330
• RW-26EU, 220-240V, 1Ø, 900 watts, 22331
• RW-16HDEU, 220-240V, 1Ø, 450 watts, 22334
• RW-26HDEU, 220-240V, 1Ø, 900 watts, 22335
R A I S I N G T H E S T A N D A R D
parts and labor.
Accessories / Options
Humitrol Rack, stainless steel, one per
drawer, non-splash, 20624
Optional Thermometer (T), for
individual drawers, contact factory
• A one-year warranty against defects covers
WELLS
WELLS
R
LISTED
R
E6070
R
STD.4 E6070
(546)
21 1/2
(546)
21 1/2
(143)
5 5/8
(584)
23
(365)
14 3/8
(241)
9 1/2
(743)
29 1/4
(276)
10 7/8
(584)
23
(143)
5 5/8
(546)
21 1/2
(533)
21
(498)
19 5/8
(546)
21 1/2
(365)
14 3/8
W E L L S M A N U F A C T U R I N G
E6070STD.4
R
E6070
R
LISTED
R
EXPORT
MODELS
ONLY
D I M E N S I O N S :
INCH
(MM)
M O D E L
R W - 1 6 B U I LT- I N
D R A W E R W A R M E R S
R W - 1 6 E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
RW-16 120 450 3.8 SINGLE NONE
RW-16 208 338 1.6 SINGLE NONE
RW-16 240 450 1.9 SINGLE NONE
RW-16EU 220-240 450 1.9 1N NONE
Denotes export (EU) products
All models with a ‘T’ or ‘HD’ suffix have the same electrical specifications as the standard units.
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes.
WELLS MANUFAC TU R ING COM PANY
2 ER IK C IR CL E, P O BOX 280 , VE RD I, N V 89 439 U .S .A . • USA PH ON E: ( 775) 689-5700 • FAX : (775 ) 689-5972
FOR ORDER S ONLY: (888) 356- 536 2 • FAX: (800) 3 56- 5142 • www.well sb loomf ie ld.co m
©20 01 WE LLS MA NUFA CT U RIN G • P RIN TED IN TH E U .S .A. • 04/ 01 • R EV (J) • PART N O. 37 119
Loading...