Wells RCP-7343 Installation Manual

WELLS MANUFACTURING

265 Hobson Street, Smithville, Tennessee 37166

telephone: [phone]

fax: [phone]

www.wells-mfg.com

OPERATIONS MANUAL

403

Model RCP-7443

DROP-IN REFRIGERA

TED

COLD PANS, 4-THIRDS, NSF7

RCP-7143, RCP-7243,

RCP-7343, RCP-7443,

RCP-7543, RCP-7643.

DROP-IN REFRIGERATED

COLD PANS, 4-THIRDS, NSF2

RCP-143, RCP-243,

RCP-343, RCP-443,

RCP-543, RCP-643.

INCLUDES INSTALLATION, USE,

CARE, SERVICE AND DIAGRAMS.

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or

MANAGER of the restaurant, or to the person responsible for TRAINING the operators of

this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR

INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any

questions concerning installation, operation or maintenance of this equipment.

2M-Z16053

04/18

LIMITED EQUIPMENT WARRANTY

Wells Manufacturing warranties new products to be free from defects
in material and/or workmanship for a period of one [1] year from the
date of original installation, except as noted below. Defects that occur
as a result of normal use, within the time period and limitations defined
in this warranty, will at Wells’ discretion have the parts replaced or

repaired by Wells or a Wells-authorized service agency.

THIS WARRANTY IS SUBJECT TO ALL LISTED CONDITIONS.

Repairs performed under this warranty are to be performed by a Wells­authorized service agency. Wells will not be responsible for charges
incurred or service performed by non-authorized repair agencies.

In all cases, the nearest Wells-authorized service agency must be used.

Wells will be responsible for normal labor charges incurred in the repair
or replacement of a warrantied product within 50 miles (80.5 km) of
an authorized service agency. Time and expense charges for anything
beyond that distance will be the responsibility of the owner. All labor
will need to be performed during regular service hours. Any overtime
premium will be charged to the owner. For all shipments outside the
U.S.A. and Canada, please see the International Warranty for specific
details.

It is the responsibility of the owner to inspect and report any shipping

damage claims, hidden or otherwise, promptly following delivery.

No mileage or travel charges will be honored on any equipment that is
deemed portable. In general, equipment with a cord and plug weighing
less than 50 lb. (22.7 kg) is considered portable and should be taken or

shipped to the closest authorized service agency, transportation prepaid .

CO N TACT

Should you require any assistance regarding the operation or
maintenance of any Wells equipment; write, phone, fax or email
our service department. In all correspondence mention the
model number and the serial number of your unit, as well as
the voltage or type of gas you are using.

Business hours are 8:00 a.m. to 4:30 p.m. Central Standard Time

Telephone [phone]

Fax [phone]

Email [e-mail]

www.wells-mfg.com

WARRA

THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.

• Any product which has not been installed, cleaned, maintained,
or used in accordance with the directions published in the appropriate

installation sheet and/or owner’s manual as well as national and local

codes, including incorrect gas or electrical connection. Wells is not liable
for any unit which has been mishandled, abused, misapplied, subjected
to chlorides, harsh chemicals, or caustic cleaners, damaged from
exposure to hard water, modified by unauthorized personnel, damaged
by flood, fire, or other acts of nature [or God], or which have an altered
or missing serial number.

• Installation, labor, and job checkouts, calibration of heat controls, air

and gas burner/bypass/pilot adjustments, gas or electrical system
checks, voltage and phase conversions, cleaning of equipment,
or seasoning of griddle surface.

• Replacement of fuses or resetting of circuit breakers, safety controls,
or reset buttons.

• Replacement of broken or damaged glass components, quartz heating
elements, and light bulbs.

• Labor charges for all removable parts in gas charbroilers and hotplates,
including but not limited to burners, grates, and radiants.

• Any labor charges incurred by delays, waiting time, or operating
restrictions that hinder a service technician’s ability to perform service.

• Parts that fail or are damaged due to normal wear or labor for

replacement of Items that can easily be replaced during a daily cleaning
routine. such as but not limited to silicone belts, PTFE non-stick sheets,
knobs, control labels, bulbs, fuses, quartz heating elements, baskets,
racks, and grease drawers.

• Components that should be replaced when damaged or worn, but have
been field-repaired instead [eg. field-welded fry pots].

• Any loss of business or profits.

ADDITIONAL WARRANTIES

Specialty/chain specific versions may also have additional and/or
extended warranties.

NTY EXCLUSIONS

PRODUCTS PARTS LABOR

universal ventless hoods 2 years 1 year

canopy hoods 2 years 1 year

“Cook’n Hold” equipment [HW10,

HWSMP, LLSC7, LLSC7WA, LLSC11,

2 years 1 year

an d LLSC 11WA]

cast iron grates, burners, and burner

shields

original Wells parts sold to repair

Wells equipment

1 year

90 days

Service First 1 year

The fore going warrant y is in lieu of any and a ll other warranti es expresse d or implied and c onstitutes the e ntire warranty. 2M-Z22393 • Rev A • 02.2018

TABLE OF CONTENTS

WARRANTY
INTRODUCTION & SPECIFICATIONS 1

2

FEATURES & OPERATING CONTROLS
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION

4
INSTALLATION 5, 6, 7
OPERATION 8
CLEANING INSTRUCTIONS

9
MAINTENANCE INSTRUCTIONS 10, 11
OPERATING INSTRUCTIONS 12, 13
TROUBLESHOOTING SUGGESTIONS
WIRIN

G AND REFR. DIAGRAMS
BLANK
ACCESSORY PARTS &

PAGE FOR NOTES

SERVICE DATA 17

14
15
16

INTRODUCTION

Thank you for purchasing this Wells Bloomfield appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that
it gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance, and to use and care for
the appliance in a manner which will ensure its optimum performance.

ELECTRICAL & REFRIGERATION SPECIFICATIONS

PRESSURE

(psig)

M403 p/n 2M-Z16053 Owners Manual Drop-In Refrigerated Cold Pans 4-3rds

MODELS

RCP-143, RCP-243,

RCP-7143, RCP-7243

RCP-343, RCP-7343

RCP-443, RCP-7443

AMPS 120VAC 1ø REFRIGERANT

HP

TOTAL MCA MFS LRA TYPE AMT. HIGH LOW

1/4

1/3 6.5 11 15 29 R-404a 24 oz. 500 174 NEMA 5-15P

1/2 7.5 12 15 33 R-404a 32 oz. 500 174 NEMA 5-15P

5.5 8 15 38

R-134a

28 oz. 440 162 NEMA 5-15P

POWER

SUPPLY

CORD

RCP-543, RCP-643,

RCP-7543, RCP-7643

3/4 15.8 21 20 59 R-404a 54 oz. 500 174 NEMA 5-20P

1

FEATURES & OPERATING CONTROLS

NOTE:

This is a general arrangement drawing of an RCP-7243, not to scale. All other units are similar. Ac­tual component positions may vary between units.

M403 p/n 2M-Z16053 Owners Manual Drop-In Refrigerated Cold Pans 4-3rds

2

PRECAUTIONS AND GENERAL INFORMATION

This appliance is intended for use in commercial establishments
only, and is intended
consumption. No other use is
manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use,
limitations and associated restrictions. Operating instructions must be
read and understood by all persons using or installing this appliance.

Food must be kept in appropriate inserts. Never place food directly
into the tank.

Cleanliness of this appliance is essential to good sanitation. Read and
follow all included cleaning instructions and schedules to ensure the
safety of the food product.

Disconnect this appliance from electrical power before performing any
maintenance or servicing.

This appliance is not jet stream approved. Do not direct water jet or
steam jet at this ap
splash or pour water on, in or over any controls, control panel or wir­ing. Do not wash floor around this appliance with water or steam jet.

The technical content of this manual, including any wiring diagrams,
schemati
procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a
qualified te

This manual is considered to be a permanent part of the appliance.
This ma
breakdown illustrations, notices and labels must remain with the
appliance if it is sold or moved to another location.

cs, parts breakdown illustrations and/or adjustment

chnician.

nual and all supplied instructions, diagrams, schematics, parts

to hold pre-chilled prepared food for human

recommended or authorized by the

pliance, or at any control panel or wiring. Do not

WARNING:

ELECTRIC
SHOCK HAZARD

All servicing requiring
access to non-insulated
electrical components
must be performed by a
factory authorized
technician.
DO NOT open any access
panel which requires the
use of tools. Failure to
follow this warning can
result in severe electrical
shock.

CAUTION:

RISK OF
DAMAGE

DO NOT connect or

energize this appliance
until all installation
instructions are read and
followed. Damage to the
appliance will result if the
instructions are not
followed.

This appliance is made in the USA. Unless otherwise noted, this

3

M403 p/n 2M-Z16053 Owners Manual Drop-In Refrigerated Cold Pans 4-3rds

nce uses all American-sized hardware.

applia

AGENCY LISTING INFORMATION

STD 2

STD 7

UL471

The RCP-7143 thru RCP-7643 are performance tested to NSF
Standard 7 for storage of potentially hazardous foods. This appliance
meets NSF Standard 7 only when the pan rails are installed in the
lowest position, otherwise it meets NSF Standard 2.

The RCP-143 thru RCP-643 meet the standards set by NSF-2 and
should not be used to hold potentially hazardous foods.

All RCP units are ETL listed for US and Canada as well as evaluated to
UL Standa

rd 471.

M403 p/n 2M-Z16053 Owners Manual Drop-In Refrigerated Cold Pans 4-3rds

4