Job Item No.
Over 90 Years Of Quality Foodservice
Products And Service
Model RCP-7300ST
DESCRIPTION
Wells Refrigerated Drop-In Sloped Cold Pans hold pre-chilled
food products at cold, fresh and safe serving temperatures.
All models are completely self-contained in one to six-well
models with individual thermostatic controls, are CFC free and
include an 8 ft. 120V cord and plug. Pans are recessed 3” to
comply with NSF-7 performance requirements. The sloped top
provide customers with improved visibility to food products.
SPECIFICATIONS
Exterior – One-piece top ange and coved-corner interiors
constructed of 18 gauge stainless steel. Exterior body
constructed of heavy gauge, corrosion resistant steel.
Condensing unit mounted on corrosion resistant frame below
the cold pan.
Interior – CFC free foamed-in-place insulation through-out,
1” drain located in the center for easy cleaning. Ledge is
recessed 3” to comply with NSF-7 requirements, allowing a
layer of air to insulate food and for pan support.
Refrigeration – Air cooled, type 134A or 404A CFC free
refrigerant system featuring wrapped coil construction on both
sides and bottom, individual thermostats, on/off switch, 8 ft.
cord and plug set NEMA 5-15P (120V models). Refrigeration
system features sight glass, easy service valves, dryer/lter
and receiver. Condensing unit may be easily removed for
service.
NSF-7 Refrigerated Cold Pans
With Slope Top
o RCP-7100ST o RCP-7200ST o RCP-7300ST
o RCP-7400ST o RCP-7500ST o RCP-7600ST
STANDARD FEATURES
o 3” recessed top edge to comply with NFS-7 requirements
o Self contained drop-in design
o Pans are raised in the rear for improved visibility and access
to food products
o Hold standard 12” by 20” food pans and fractional sized
pans
o 18 gauge stainless steel top and liner for maximum strength
and durability
o 1” drains for ease of cleaning
o On-off switch with 8 ft. cord & plug for ease of installation and
operation
o Type 134A or 404A CFC free refrigerant
o Fully insulated, CFC free, foamed-in place insulation keeps
food cold while saving energy
o Recessed ledge for pan support and colder, fresher products
o Quick & easy service with sight glass, service valves, lter/
dryer and receiver
o Limited 1 year parts & labor warranty
OPTIONS & ACCESSORIES
o 5-year compressor warranty
o Perforated bottom strainer plate conveniently holds ice
above drain to prevent clogging
o Adaptor bars for fractional sized pans
o Remote on/off switch
o 220/230/240V
o 50 cycle
o Remote models (Includes compressor and condensing units
and up to 20’ leads)
o Remote models without compressors or condensing units
o Special condenser orientation and compressor rack position
o 2nd year parts & labor warranty
CERTIFICATIONS
Wells Bloomeld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloomeld.com · Printed in the U.S.A.
Sheet No. WELLRCP7ST-06/14
NOTE: Specications are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
INCHES
MM
Over 90 Years Of Quality Foodservice
Products And Service
NSF-7 Refrigerated Cold Pans
With Slope Top
o RCP-7100ST o RCP-7200ST o RCP-7300ST
o RCP-7400ST o RCP-7500ST o RCP-7600ST
OTE: Specifications are subject to change without
N
notice and are not intended for installation purposes. See
installation instructions prior to installing the unit.
SPECIFICATIONS
OVERALL DIMENSIONS INTERIOR DIMENSIONS CUT OUT DIMENSIONS
Model
Number
RCP-7100ST
RCP-7200ST
RCP-7300ST
RCP-7400ST
RCP-7500ST
RCP-7600ST
Front to Back
OVERALL DIMENSIONS
A
Inches
(MM)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689)
27-1/8
(689)
Left to Right
Inches
(MM)
19-1/8
(486)
32-3/4
(832)
46-1/2
(1181)
60-1/4
(1530)
74
(1880)
87-3/4
(2229)
B
C
Height
Inches
(MM)
28-1/2
(724)
28-1/2
(724)
28-1/2
(724)
28-1/2
(724)
28-1/2
(724)
28-1/2
(724)
D
Front to Back
Inches
(MM)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
21-7/8
(556)
E
Left to Right
Inches
(MM)
13-7/8
(352)
27-1/2
(699)
41-1/4
(1048)
55
(1397)
68-3/4
(1746)
82-1/2
(2096)
Front to Back
Inches
(MM)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
25-7/8
(657)
Left to Right
Inches
(MM)
17-7/8
(454)
31-1/2
(800)
45-1/4
(1149)
(1499)
72-3/4
(1848)
86-1/2
(2197)
POWER
SUPPLY
Model
Number
RCP-7100ST
RCP-7200ST
RCP-7300ST
RCP-7400ST
RCP-7500ST
RCP-7600ST
Due to periodic changes in designs, methods, procedures, policies and regulations, the speci cations contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
speci cations. By using the information provided, the user assumes all risks in connection with such use.
Wells Bloom eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloom eld.com · Printed in the U.S.A.
VO LTS HP AMPS PHASE POWER
115 1/4 5.5 SINGLE NEMA 5-15P 134A
115 1/4 5.5 SINGLE NEMA 5-15P 134A
115 1/3 6.5 SINGLE NEMA 5-15P 404A
115 1/2 7.5 SINGLE NEMA 5-15P 404A
115 3/4 15.8 SINGLE NEMA 5-20P 404A
115 3/4 15.8 SINGLE NEMA 5-20P 404A
WEIGHTS CARTON DIMENSIONS CRATE SIZE
Model
Number
RCP-7100ST
RCP-7200ST
RCP-7300ST
RCP-7400ST
59
RCP-7500ST
RCP-7600ST
SHIPPING INFORMATION
SUPPLY
SHIPPING
WEIGHT
POUNDS
(KG)
(111)
(129)
115
(52)
140
(64)
175
(79)
210
(95)
245
285
Refrigerant
INSTALLED
WEIGHT
POUNDS
(KG)
105
(48)
124
(56)
156
(71)
175
(79)
194
(88)
213
(97)
NOTE: Speci cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
WIDTH
DEPTH
Inches
(MM)
HEIGHT
Inches
Inches
(MM)
21
(533)29(737)32(813)
29
(737)34(864)32(813)
29
(737)48(1219)32(813)
29
(737)62(1575)32(813)
29
(737)76(1930)32(813)
29
(737)89(2261)32(813)
(MM)
CUBIC
FEET
METERS
11.3 0.31
18.3 0.52
25.8 0.73
33.3 0.94
41.0 1.16
47.8 1.35
CUBIC