Wells ISDI35 Service Manual

Drop-In
Induction Range

Owner’s Manual

Models

ISDI35

This manual includes material related to installation,
use , cleaning, and care. Any available parts list[s]
pertaining to the unit covered by this manual are
also included.

This manual must be read and understood by all
persons using or installing this appliance. Contact
your Wells dealer if you have any questions concerning
installation, use, or maintenance of this equipment.

DO NOT DISCARD THIS MANUAL.

ISDI35

M-Z21951 • Rev. A • 05.2017

2

LIMITED WARRANTY STATEMENT

Unless otherwise specifi ed, all commercial cooking equipment manufactured by Wells Manufacturing
is warrantied against defects in materials and workmanship for a period of one year from the date of
original installation or 18 months from the date of shipment from our factory, whichever comes fi rst,
and is for the benefi t of the original purchaser only. This warranty is the complete and only warranty,
expressed or implied in law, or in fact, including but not limited to, warranties of merchantability or
fi tness for any particular purpose, and/or for direct, indirect, or consequential damages in connection
with Wells products. This warranty is void if it is determined that, upon inspection by an authorized
service agency, the equipment has been modifi ed, misused, misapplied, improperly installed, or
damaged in transit or by fi re, fl ood or act of God. It also does not apply if the serial nameplate has
been removed, or if service is performed by unauthorized personnel. The prices charged by Wells
Manufacturing for its products are based upon the limitations in this warranty. Seller’s obligation
under this warranty is limited to the repair of defects without charge by a Wells Manufacturing
factory authorized service agency or one of its sub-service agencies. This service will be provided
on customer’s premises for non-portable models. Portable models [see list of portable models below]
must be taken or shipped to the closest authorized service agency, transportation charges prepaid,
for service. In addition to restrictions contained in this warranty, specifi c limitations are shown in the
Service Policy and Procedure Guide. Wells Manufacturing authorized service agencies are located
in principal cities. This warranty is valid in the United States and Canada and void elsewhere. Please
consult your telephone directory, your foodservice equipment dealer, or contact Wells Manufacturing
directly for information and other details concerning warranty.

PARTS WARRANTY

All genuine Wells replacement parts are warrantied for ninety [90] days from date of purchase on
non-warranty equipment. This parts warranty is limited only to replacement of the defective part[s].
Any use of non-genuine Wells parts completely voids any warranty.

SERVICES AND EXPENSES NOT COVERED BY WARRANTY

• Travel time and mileage rendered beyond the 50-mile • Voltage conversions or gas conversions
radius limit • Pilot light adjustment

• Mileage and travel time on “portable” equipment • Miscellaneous adjustments

[see below] • Thermostat calibration and bypass adjustment

• Labor to replace such items that can be replaced easily • Resetting of circuit breakers, safety controls,
during a daily cleaning routine [e.g., removable kettles or reset buttons
on fryers, knobs, grease drawers on griddles, etc.] • Installation of equipment

• Replacement of normal wear items such as bulbs, • Cleaning of equipment
fuses, etc. • Seasoning of griddle plates

• Charges incurred by delays, waiting time, or operating • Repair of damage created during transit, delivery,
restriction that hinder the service technician’s ability or installation or created by an act of God

to perform service. Any overtime premium will be • All labor must be performed during regular working
charged to the buyer. hours.

PORTABLE EQUIPMENT

Wells will not honor service bills that include travel time and mileage charges for servicing any products
considered “portable” in nature. These products should be taken to the service agency for repair.

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes
the entire warranty.

Should you require any assistance regarding the operation or Business hours: 8:00 a.m. to 4:30 p.m.
maintenance of any Wells equipment; write, phone, fax or email Central Standard Time
our Service Department. In all correspondence mention the Telephone: [phone] Fax: [phone]
model number and the serial number of your unit, as well as Email: [e-mail]
the voltage or type of gas you are using. Website: www.wellsbloomfi eld.com

i

TABLE OF CONTENTS

General Warranty Information

Specifications and Specific Warranty

iii
General Information
Safety I

nformation
Installation Information
Daily Operation
Cleaning
Troubleshooting and Replacement Parts

2

3–4

5
5
6

Wiring Diagram 7

i

1

2M-Z21951 Rev A Owner’s Manual for ISDIxx Drop-In Induction Range

SPECIFICATIONS

13.1 in.

(333 mm)

15.1 in.

(384 mm)

6.3 in.

(160 mm)

0.5 in.

(13 mm)

15.1 in.

(384 mm)

CLEARANCES

This unit cannot be installed in any counter over 1.125 inch (29 mm)
thick. Please allow a minimum of four [4] inches (102 mm) of clearance
on each of the four [4] sides and below the lowest point of the unit.

COOLING

This unit needs an adequate amount of air to function properly.
Depending on your setup, an auxiliary fan and ducting may need
to be used to circulate a proper amount of cool inlet air into the unit
and/or expel hot air from the unit to the exterior of the cabinet the
unit is mounted in. The cool and warm air should be separated and
will require enough airflow to flow 150 CFM.

MODEL WIDTH HEIGHT DEPTH

ISDI35

To meet standards for Canada, units must be run 220 V–240 V.

WARRANTY

These units come with a two [2] year warranty for parts and labor.

15.1 in.

(384 mm)

1

6.8 in.

(173 mm)

15.1 in.

(384 mm)

VO LTS

[50/60 Hz]

208–

240

WATTS AMPS

3,500

16.8–

14.6

NEMA

PLUG

6-20P

APPROX. SHIP

WEIGHT

19 lb.

(8.5 kg)

6-20P

APPROX. WEIGHT

INSTALLED

15 lb.

(7 kg)

iii