Countertop
Induction Range
Owner’s Manual
Models
ISC25 and ISC35
This manual includes material related to installation,
use , cleaning, and care. Any available parts list[s]
pertaining to the unit covered by this manual are
also included.
This manual must be read and understood by all
persons using or installing this appliance. Contact
your Wells dealer if you have any questions concerning
installation, use, or maintenance of this equipment.
DO NOT DISCARD THIS MANUAL.
ISC25
2M-Z 21948
• Rev. - • 01.2017
LIMITED WARRANTY STATEMENT
Unless otherwise specifi ed, all commercial cooking equipment manufactured by Wells Manufacturing
is warrantied against defects in materials and workmanship for a period of one year from the date of
original installation or 18 months from the date of shipment from our factory, whichever comes fi rst,
and is for the benefi t of the original purchaser only. This warranty is the complete and only warranty,
expressed or implied in law, or in fact, including but not limited to, warranties of merchantability or
fi tness for any particular purpose, and/or for direct, indirect, or consequential damages in connection
with Wells products. This warranty is void if it is determined that, upon inspection by an authorized
service agency, the equipment has been modifi ed, misused, misapplied, improperly installed, or
damaged in transit or by fi re, fl ood or act of God. It also does not apply if the serial nameplate has
been removed, or if service is performed by unauthorized personnel. The prices charged by Wells
Manufacturing for its products are based upon the limitations in this warranty. Seller’s obligation
under this warranty is limited to the repair of defects without charge by a Wells Manufacturing
factory authorized service agency or one of its sub-service agencies. This service will be provided
on customer’s premises for non-portable models. Portable models [see list of portable models below]
must be taken or shipped to the closest authorized service agency, transportation charges prepaid,
for service. In addition to restrictions contained in this warranty, specifi c limitations are shown in the
Service Policy and Procedure Guide. Wells Manufacturing authorized service agencies are located
in principal cities. This warranty is valid in the United States and Canada and void elsewhere. Please
consult your telephone directory, your foodservice equipment dealer, or contact Wells Manufacturing
directly for information and other details concerning warranty.
PARTS WARRANTY
All genuine Wells replacement parts are warrantied for ninety [90] days from date of purchase on
non-warranty equipment. This parts warranty is limited only to replacement of the defective part[s].
Any use of non-genuine Wells parts completely voids any warranty.
SERVICES AND EXPENSES NOT COVERED BY WARRANTY
• Travel time and mileage rendered beyond the 50-mile • Voltage conversions or gas conversions
radius limit • Pilot light adjustment
• Mileage and travel time on “portable” equipment • Miscellaneous adjustments
[see below] • Thermostat calibration and bypass adjustment
• Labor to replace such items that can be replaced easily • Resetting of circuit breakers, safety controls,
during a daily cleaning routine [e.g., removable kettles or reset buttons
on fryers, knobs, grease drawers on griddles, etc.] • Installation of equipment
• Replacement of normal wear items such as bulbs, • Cleaning of equipment
fuses, etc. • Seasoning of griddle plates
• Charges incurred by delays, waiting time, or operating • Repair of damage created during transit, delivery,
restriction that hinder the service technician’s ability or installation or created by an act of God
to perform service. Any overtime premium will be • All labor must be performed during regular working
charged to the buyer. hours.
PORTABLE EQUIPMENT
Wells will not honor service bills that include travel time and mileage charges for servicing any products
considered “portable” in nature. These products should be taken to the service agency for repair.
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes
the entire warranty.
Should you require any assistance regarding the operation or Business hours: 8:00 a.m. to 4:30 p.m.
maintenance of any Wells equipment; write, phone, fax or email Central Standard Time
our Service Department. In all correspondence mention the Telephone: 314.678.6314 Fax: 314.781.2714
model number and the serial number of your unit, as well as Email: customerservice@star-mfg.com
the voltage or type of gas you are using. Website: www.wellsbloomfi eld.com
i
TABLE OF CONTENTS
Warranty i
Specifications iii
General Information 1
Safety Information 2
Installation Information 3
Daily Operation 4
Cleaning 5
Troubleshooting and Replacement Parts 6
Wiring Diagram 7
2M-Z21948 Rev- Owner’s Manual for ISCxx Countertop Induction Range
SPECIFICATIONS
12.6 in.
(320 mm)
A
12.6 in.
(320 mm)
B
C
ISC35 shown
1 in.
(25 mm)
CLEARANCES
Please allow 4 inches (102 mm) of clearance
on each side and the rear of the unit.
POWER CONNECTION
The power cord exits the body on the bottom
of the unit. It is 1 inch (25 mm) from the right
side on both models and 6 inches (152 mm)
from the back on ISC35 models and 4.5 inches
(114 mm) from the back o ISC25 models.
MODEL
ISC25
ISC35
Adjustable up 1.5 inches (38 mm)
To meet standards for Canada, units must be run 220 V–240 V
160501806SHA-001 161101987SHA-001 17707429 002
WIDTH
[A]
13.4 in.
(340 mm)
14.2 in.
(360 mm)
1
HEIGHT
[B]
4.5 in.
(115 mm)
6.1 in.
(155 mm)
DEPTH
[C]
15.9 in.
(405 mm)
17.3 in.
(440 mm)
VO LTS
[50/60
Hz]
208–
240
208–
240
iii
WATTS AMPS
2,400
3,500
11.5–
10
16.8–
14.6
NEMA
PLUG
6-15P
6-20P
APPROX.
SHIP
WEIGHT
19 lb.
(8.5 kg)
29 lb.
(13 kg)
6-15P 6-20P
INSTALLED
APPROX.
WEIGHT
15 lb.
(7 kg)
24 lb.
(11 kg)