Wells HW-106D User Manual
Job Item No.
Over 90 Years Of Quality Foodservice
Products And Service
Model HW106D
Cook & Hold Warmers
HW106D Round
HWSMP6D Rectangular
Single Well, Heavy-Duty, Top Mount
Additional Features Available
• Drains are standard
• HWSMP6D is fully insulated
STANDARD FEATURES
❏ HW106D accommodates one 11-quart round inset pan
❏ HWSMP6D accommodates one 12” x 20” standard pan or
equivalent fractional inset pans
❏ One-piece stainless steel top fl ange and heavy-gauge, deep-
drawn stainless steel warming pans
❏ Wet operation only
❏ Thermostatic controls standard
❏ Separate controls for each individual wells
❏ High limits prevent overheating
❏ Thermostatic controls are recessed in a one-piece, drawn,
front-mounted panel
❏ Powerful tubular heating elements
❏ ½” drains available
❏ Wellsloks are standard for ease of installation
❏ 2-Year Limited Parts & 1-Year Limited Labor Warranty
Model HWSMP6D
DESCRIPTION
Wells Cook & Hold warmers are designed for top-mount
installations and to quickly heat refrigerated foods and hold
heated foods at safe and fresh serving temperatures.
The HW106D will accommodate one 11-quart, round inset pan
while the HWSMP6D will hold one 12” x 20” standard food
pan or equivalent fractional inset pans. Both are designed for
wet operation only.
SPECIFICATIONS
Construction – One-piece stainless steel top fl ange and heavy-
gauge, deep-drawn stainless steel warming pans are standard
features on all models. Wellsloks are standard for ease of
installation.
Insulation – HWSMP6D Series models are fully insulated around
all 4-sides and bottom for quicker preheat, faster recovery and
energy savings.
Controls & Heating- Individual controls for each well provide
maximum versatility. Both models feature thermostatic controls
with temperature ready indicator lights and are recessed in a
one-piece deep-drawn control panel. Powerful tubular heating
elements are submerged inside the well for maximum temperature
transfer and are designed for wet operation only.
OPTIONS & ACCESSORIES
❏ Optional 72”wiring
❏ Drain screens
❏ Drain value extension kit, extension from drain to counter
front with remote handle, for use with “D” models only, 20385
❏ Adapter Top, to convert HW106D to hold one 4-quart inset,
20822
❏ Adapter Top, to convert HW106D to hold one 7-quart inset,
20175
❏ Round Inset, 4-quart capacity with lid, 20774
❏ Round Inset, 7-quart capacity with lid, 20587
❏ Round Inset, 11-quart capacity with lid, 20908
❏ Round Inset, 11-quart capacity with hinged lid, 21057
CERTIFICATIONS
C
Sheet No. HW106D-12/12
Wells Bloomfi eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Over 90 Years Of Quality Foodservice
Products And Service
Cook & Hold Warmers
HW106D Round
HWSMP6D Rectangular
Single Well, Heavy-Duty, Top Mount
BACK
3
(76)
Minimum Clearance
SIDE
3
(76)
HW106D
BOTTOM
1
(25)
N
intended for installation purposes. See installation
instructions prior to installing the unit.
FRONT*
4
(102)
OTE: Specifications are subject
to change without notice and are not
BACK
2
(51)
HWSMP6D
Minimum Clearance
SIDE
2
(51)
BOTTOM
6-3/4
(171)
FRONT*
4-1/8
(105)
SPECIFICATIONS
(MM)
6-1/4
(159)
6-1/4
(159)
6-1/4
(159)
Shipping
Weights
Pounds
CONTROL
PANEL
Height
Inches
5-7/8
(149)
5-7/8
(149)
5-7/8
(149)
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
(305)
(305)
(375)
OVERALL
Length
Front to Back
Inches
(MM)
23-1/2
Model
Number
HW106D-120 Round Warmer with
HW106D Round Warmer with
HWSMP6D Rectangular
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Wells exercises good faith
efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifi cations. By using the
Description Volts Watts Phase AMPS OVERALL
Thermostatic Control & Drain Infinite
control no drain
Thermostatic Control & Drain Infinite
control no drain
Warmer with
Thermostatic control
and drain
120V 1650 1Ø 13.75 12
208/240V 1240/1660 1Ø 6/7 12
208/240V 1350/1800 1Ø 6.5/7.5 14-3/4
information provided, the user assumes all risks in connection with such use.
Width
Left to Right
Inches
(MM)
12
(305)
12
(305)
(597)
OVERALL
Height
Inches
(MM)
8-1/8
(206)
8-1/8
(206)
8-11/16
(221)
CONTROL
PANEL
Width
Inches
(MM)
Wells Bloomfi eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-5445
www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
(KG)
12
(5.5)
12
(5.5)
26
(12)
Crate Size
Cubic Feet
(Cubic
Meters)
1.6
(0.05)
1.6
(0.05)
3.85
(0.11)
Approvals
U C
U
U
Loading...