Wells FT-3 User Manual
Over 90 Years Of Quality Foodservice
Products And Service
Model FT-3
DESCRIPTION
Wells Refrigerated Drop-In Frost Tops are designed to keep
pre-chilled food and beverage products at cold, fresh serving
temperatures. All models are completely self-contained. Each
section holds a full-size sheet pan and is available from one –
to six size pan models, are CFC free and include an 8 ft. 120V
cord and plug.
SPECIFICATIONS
To p – Die-stamped stainless steel construction with a 1” drain
for ease of cleaning. It can accommodate half and full size
sheet pans. Features adjustable temperature controls.
Job Item No.
Refrigerated Drop-In Frost Tops
❏ FT-1 ❏ FT-2 ❏ FT-3
❏ FT-4 ❏ FT-5 ❏ FT-6
STANDARD FEATURES
❏ Self contained drop-in design
❏ Hold standard 18” by 26” sheet pans or ½ size pans
❏ Stainless steel top and liner for maximum strength and
durability
❏ 1” drain for ease of cleaning
❏ On-off switch with 8 ft. cord & plug for ease of installation and
operation
❏ Type 134A CFC free refrigerants
❏ Fully insulated, CFC free, foamed-in place for energy savings
❏ Quick & easy service with sight glass, service valves, fi lter/
dryer and receiver
❏ Limited 1 year parts & labor warranty
OPTIONS & ACCESSORIES
❏ 5-year compressor warranty
❏ Condenser orientation and compressor rack location
❏ Remote on/off switch
❏ 220/230/240V
❏ 50 cycle
❏ Remote models (Includes compressor and condensing units
and up to 20’ leads)
❏ Remote models without compressors or condensing units
❏ 2nd year parts & labor warranty
CERTIFICATIONS
Interior – CFC free insulation on side and bottom. Condensing
unit mounted on corrosion resistant frame below the cold pan.
Refrigeration – Refrigeration coils are attached to the
underside of the frost top for maximum effi ciency and
cooling. Additional coils surround the sides of the frost top for
complete coverage. Air cooled CFC-free refrigerant system
features self-contained condenser and sealed compressor
and an on/off switch with 8 ft. cord and plug set. Refrigeration
system features sight glass, easy service valves, dryer/fi lter
and receiver. Condensing unit may be easily removed for
service.
Wells Bloomfi eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
Sheet No. WELLSFT7-02/12
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
Refrigerated Drop-In Frost Tops
INCHES
MM
Over 90 Years Of Quality Foodservice
Products And Service
❏ FT-1 ❏ FT-2 ❏ FT-3
❏ FT-4 ❏ FT-5 ❏ FT-6
OTE:
N
Specifications
are subject to change
without notice and
are not intended for
installation purposes.
See installation
instructions prior to
installing the unit.
SPECIFICATIONS
OVERALL DIMENSIONS INTERIOR DIMENSIONS CUT OUT DIMENSIONS
Model
Number
Front to Back
FT-1
FT-2
FT-3
FT-4
FT-5
FT-6
OVERALL DIMENSIONS
A
Inches
(MM)
29-1/4
(743)
29-1/4
(743)
29-1/4
(743)
29-1/4
(743)
29-1/4
(743)
29-1/4
(743)
Left to Right
Inches
(MM)
21-1/4
(540)
39-1/4
(997)
57-1/4
(1454)
75-1/4
(1911)
93-1/4
(2369)
111-1/4
(2826)
B
C
Height
Inches
(MM)
21-1/8
(537)
21-1/8
(537)
21-1/8
(537)
21-1/8
(537)
21-1/8
(537)
21-1/8
(537)
D
Front to Back
Inches
(MM)
25-1/4
(641)
25-1/4
(641)
25-1/4
(641)
25-1/4
(641)
25-1/4
(641)
25-1/4
(641)
E
Left to Right
Inches
(MM)
17-1/4
(438)
35-1/4
(895)
53-1/4
(1353)
71-1/4
(1810)
89-1/4
(2267)
107-1/4
(2724)
F
Front to Back
Inches
(MM)
27-5/8
(702)
27-5/8
(702)
27-5/8
(702)
27-5/8
(702)
27-5/8
(702)
27-5/8
(702)
G
Left to Right
Inches
(MM)
19-5/8
(498)
37-5/8
(956)
55-5/8
(1413)
73-5/8
(1870)
91-5/8
(2327)
109-5/8
(2784)
WEIGHTS CARTON DIMENSIONS CRATE SIZE
Model
Number
FT-1
FT-2
FT-3
FT-4
FT-5
FT-6
SHIPPING INFORMATION
88
(40)
97
(44)
108
(49)
119
(54)
130
(59)
141
(64)
WIDTH
Inches
(MM)
22-3/4
(578)
40-3/4
(1035)
58-3/4
(1492)
76-3/4
(1949)
94-3/4
(2407)
112-3/4
(2864)
SHIPPING
WEIGHT
POUNDS
(KG)
103
(47)
125
(57)
140
(64)
155
(70)
170
(77)
187
(83)
INSTALLED
WEIGHT
POUNDS
(KG)
DEPTH
Inches
(MM)
30-7/8
(784)
30-7/8
(784)
30-7/8
(784)
30-7/8
(784)
30-7/8
(784)
30-7/8
(784)
HEIGHT
Inches
(MM)
23-5/8
(600)
23-5/8
(600)
23-5/8
(600)
23-5/8
(600)
23-5/8
(600)
23-5/8
(600)
CUBIC
FEET
METERS
9.6 0.27
17.2 0.48
24.8 0.7
32.4 0.91
40 1.13
47.6 1.34
POWER
SUPPLY
Model
Number
FT-1 115 1/4 4.9 SINGLE NEMA 5-15P 134A
FT-2 115 1/4 4.9 SINGLE NEMA 5-15P 134A
FT-3 115 1/3 5.6 SINGLE NEMA 5-15P 404A
FT-4 115 1/2 6.4 SINGLE NEMA 5-15P 404A
FT-5 115 3/4 15.2 SINGLE NEMA 5-20P 404A
FT-6 115 3/4 15.2 SINGLE NEMA 5-20P 404A
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Wells
exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in connection with such use.
Wells Bloomfi eld · 10 Sunnen Dr. St. Louis, MO 63143 U.S.A.
Phone : (314) 678-6314 · Fax (314) 781-3636
www.wellsbloomfi eld.com © 2012 Wells Bloomfi eld · Printed in the U.S.A.
VOLTS HP AMPS PHASE POWER
SUPPLY
Refrigerant
NOTE: Specifi cations are subject to change without
notice and are not intended for installation purposes.
See installation instructions prior to installing the unit.
CUBIC
Loading...