Weldex WDB-5655VDN User Manual

Digital Day & Night

IR Color Camera

설명서용 서

MANUAL

Without IR LED type

IR LED type

The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un insulated Dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

CAUTION: To prevent electric shock and risk of fire hazards: Do NOT use power sources other than that specified. Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to all local codes

■ Warning

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time, fire may be caused.

Do not install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

gerp

■ Precautions

Only use the camera under conditions where temperatures are between

-10°C and +50°C. Be especially careful to provide ventilation when

erating under high temperatures.

Severe lighting change or flicker can cause the camera to work improperly.

It can cause the image quality to be poor.

It is one of the most important parts of the camera. Be careful not to be stained by

rint.

fin

It can cause malfunctions to occur.

If it gets wet, wipe it dry immediately. Liquids can contain minerals that

corrode the electronic components

■ Contents

1.Features

2. Components

3. Names and functions of parts

4. Setup Menu Operation

5. Troubleshooting

6. Protocol Setting

It can damage the CCD.

If it is exposed to radioactivity,

For heated CCD, it will be out of order.

-------------------

7. Specifications ------------------- 20

1. Features

☺Horizontal Resolution 600 TV Lines

Clear image quality has been achieved by employing a SONY CCD with 410,000 (Effective) pixels, which provides a horizontal resolution of 600 TV lines.

☺DAY & NIGHT

This camera has a function that automatically selects the mode that is appropriate for daytime or night-time conditions. The COLOR mode operates in daytime conditions to provide optimum colors, and BW mode operates in nighttime conditions to enhance the definition of the image.

☺Electronic IRIS

The electronic IRIS function enables continuous automatic control of the shutter between 1/60~1/120,000 seconds.

☺PRIVACY Function

The PRIVACY function conceals the areas you do not wish to appear on the screen.

☺CCVC (Camera Control Via Coaxial cable)

This is a remote control function that overlaps the coaxial cable (for a transfer of the Video signal) with the control signal. In installation or repair, this helps you control the communication controller (optional) without additional cabling. * Coaxial controller (Option SCX-RD100).

☺High Sensitivity

The built-in high sensitivity SONY COLOR CCD enables a clear image even in

0.3Lux (0.1Lux B/W) or as low as 0.0004Lux with SENS-UP.

☺DNR (Digital Noise Reduction)

The amount of low luminance noise has been significantly reduced, and the signal-to-noise ratio (S/N ratio) as well as horizontal resolution has been improved, resulting in a clear and sharp image display even in the dark.

☺Controlled by OSD Menu

The camera can be controlled by selecting text displayed on the monitor screen.

☺Additional Functions

Sens-up, Motion Detection, Mirror functions are also available.

2. Cable Connection & OSD Control

1) Cable Connection

2) OSD Control

① 3AXIS BRACKET

LEFT

SET

DOWN

RIGHT

- Please loosen screws and fix tilted and panned position.

③ LENS : Vari-Focal Auto Iris Lens ( 6.0mm ~ 50mm ) ③ OSD PCB

- SETUP button : Used for the menu display. This button can be used

to confirm settings after changing the value of the selected function or

current conditions.

- UP & DOWN buttons : Used for selecting items by moving the cursor

up or down on the menu screen.

- LEFT & RIGHT buttons : Used when changing item values, by

moving the cursor to the left or right on the menu screen

3. Setup Menu Operation

□ USING ICONS IN THE MENU

◆ (EXIT) Exits the menu setting. Before you exits the menu setting, select

SAVE to save your settings, or select QUIT to cancel.

◆ (RET) Returns to the previous menu

◆ (HOME) Returns to the main menu.

◆ (SAVE) Used to save your settings of MASK AREA, PRIVACY ZONE

and more. Once you save your settings, they will remain even if you select QUIT in the menu.

◆ (DEL) Used to deletes your settings of MASK AREA, PRIVACY ZONE and more. Once you delete your settings, they will not be restored even if you select QUIT in the menu.

□ OSD Menu Structure

MAIN MENU Description

CAMERA SET

INTELLIGENCE

PRIVACY ZONE

OTHER SET

COMMUNICATION

SYSTEMINFO

LANGUAGE

CAMERA SET Description

CAMERA ID

IRIS

AGC(MOTION)

DNR

SHUTTER

SENS-UP

FLICKERLESS

DAY/NIGHT WHITE BAL

DIGITALZOOM

DETAIL

V-SYNC

AGC COLOR SUP

REVERSE

POSI/NEGA

PIP DIS

INTELLIGENCE Description

MOTION

MASK AREA

DISPLAY

SENSITIVITY

RESOLUTION

ALARM OUT

PRIVACY ZONE Description

PRIVACY SET

STYLE

OTHER SET Description

FACTORY

DEFAULTS

OSD COLOR

Camera related functions and data. Motion detection, and more. Privacy related settings Configure for Factory Defaults, and more. Communication set. Displays the system information. Select a language on the OSD menu.

ON/OFF, Make the camera ID and set the place. 54 characters.(2 line)

ALC (Video/DC)/ELC, Select lens and control the iris level. Setting the BLC function.

Setting the Max Gain under the low light. Digital Noise Reduction fucntion Set the shutter speed. (High shutter speed) Set the shutter speed. (Slow shutter speed) Shutter speed : NTSC(1/60 →1/100sec), PAL (1/50 →1/120sec) Day / Night Mode (COLOR/BW/AUTO/EXT), Level set. White Balance Mode (ATW1/ATW2/AWC/MANUAL) Digital Zoom ratio set (x1 ~ x10 : x0.1 step) Aperture gain set Internal/Line lock mode set Color suppression amount at the AGC function Horizontal/Vertical Reverse Positive or Negative Video output set Picture In Picture at Digital Zoom operation Digital Image Stabilization set

Motion detection function Set the motion detection exception area Motion Detection display ON/OFF Motion Detection sensitivity Motion Detection resolution Alarm out set

Set the privacy zone Set the privacy style (Mosaic, Color, etc)

Set the privacy zone

OSD menu color set

+ 16 hidden pages