Weldex WDAC-4288WD Specsheet
1/3” High Resolution Digital OSD Camera
Ultra wide dynamic range pxim seawolf sensor
for outstanding back light sensitivity
Enhanced low-light performance for indoor
& outdoor applications (0.1 Lux)
High resolution of 690 HTVL lines
User friendly OSD menu control
Day & night
Dual voltage - AC24V / DC12V
VIDEO/DC drive lens
Dynamic range: 120 dB max
Additional functions
(sens-up, motion detection, mirror, sharpness, sync-INT/LL)
WDAC-4288WD
Power source
High quality image mode
High resolution image mode
Sensor
Scanning system
Synchronization
Frequency
Resolution
Video output
Day / night
Min. illumination
Back light compensation
AGC
White balance
Electronic shutter speed
SNR
O.S.D
Noise reduction
Motion detection
Image ip
Privacy function
Lens mount
Operation temp. / humidity
Weight
NTSC
AC24V & DC12V, power dual AC24V & DC12V, power dual
Internal / line lock (phase adjust) Internal / line lock (phase adjust)
Horizontal:15.734KHz, vertical:59.94Hz
1.0Vp-p/75 (video 0.714Vp-p SYNC 0.286Vp-p)
True day / night: soft day / night (B/W)
0.1Lux min. illumination (F1.2, 50IRE)
Programmable up to 50dB
1/25 ~ 1/30,720 second (F1.2)
up to 50dB max (Y signal, AGC o) up to 50dB max (Y signal, AGC o)
On / o (4 programmable zone) On / o (4 programmable zone)
On / o (16 programmable zone) On / o (16 programmable zone)
-10˚C ~ +50˚C / 30 ~ 90% RH
720 x 540
758 x 540
1/3” Pixim seawolf 1/3” Pixim seawolf
Progressive
Horizontal:15.734KHz, vertical:59.94Hz
690TV lines
1.0Vp-p/75 (video 0.7Vp-p SYNC 0.3Vp-p)
True day / night: soft day / night (B/W)
0.1Lux min. illumination (F1.2, 50IRE)
BLC on / o BLC on / o
Programmable up to 50dB
ATW, AWB
1/25 ~ 1/30,720 second (F1.2)
Built-in
3D motion adaptive
Horizontal and Vertical
C / CS mount
Approx.160g (0.35lbs)
3D motion adaptive
Horizontal and Vertical
-10˚C ~ +50˚C / 30 ~ 90% RH
Approx.160g (0.35lbs)
PAL
720 x 540
758 x 540
Progressive
690TV lines
ATW, AWB
Built-in
C / CS mount
SPECIFICATION
weldex.com
oem@weldex.com
Tel: (714) 761-2100 [USA]
Fax:(714) 761-3811 [USA]
Tel:+49 (0)2102 528 2803 [GER]
Fax:+49 (0)2102 528 2804 [GER]
6751 Katella Avenue, Cypress, CA 90630 [USA]
© 2014 Weldex
Broichhof Strasse 5 D-40880 Ratingen, Germany [GER]
1/3” High Resolution Digital OSD Camera
DIMENSIONS
50.0mm
51.8mm
50.0mm
WDAC-4288WD
11.8mm
17.0mm 20.0mm
weldex.com
oem@weldex.com
Tel: (714) 761-2100 [USA]
Fax:(714) 761-3811 [USA]
Tel:+49 (0)2102 528 2803 [GER]
Fax:+49 (0)2102 528 2804 [GER]
6751 Katella Avenue, Cypress, CA 90630 [USA]
© 2014 Weldex
Broichhof Strasse 5 D-40880 Ratingen, Germany [GER]
Loading...