Wel-Bilt 21402 Owner's Manual

35-PC. ROTARY TOOL KIT

OWNER’S MANUAL

WARNING:

Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other

basic safety precautions may result in serious personal injury.

Item# 21402

Page of 8

2

Thank you very much for choosing a Wel-Bilt™ product! For future reference, please complete the

owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to

become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.

For technical questions please call 1-800-222-5381.

INTENDED USE:

The Rotary Tool has been designed with the hobbyist in mind. It is ideal for intricate work or creative

projects and supports a variety of applications including engraving, grinding, cleaning, polishing,

sanding, cutting, carving and drilling. It is intended for do-it-yourself (DIY) applications only and is

not designed for industrial or commercial applications.

TECHNICAL SPECIFICATIONS:

Motor: 135W
Input: 120V ~ 60Hz
No load speed: 10,000 – 32,000/min
Collet chuck capacity: 1/8in.

GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed

below may result in serious injury.

CAUTION: Do not allow persons to operate or assemble this Rotary Tool until they

have read this manual and have developed a thorough understanding of how the Rotary Tool
works.

WARNING: The warnings, cautions, and instructions discussed in this instruction

manual cannot cover all possible conditions or situations that could occur. It must be

understood by the operator that common sense and caution are factors which cannot be built into

this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

Page of 8

3

IMPORTANT SAFETY CONSIDERATIONS

• Stay alert, watch what you are doing and use common sense when operating the Rotary

Tool. Do not use the Rotary Tool while you are tired or under the influence of drugs, alcohol

or medication. A moment of inattention while operating the Rotary Tool may result in serious

personal injury.

• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be

caught in moving parts. Air vents often cover moving parts and should be avoided.

• Use safety apparel and equipment. Use ANSI-approved safety goggles or safety glasses

with side shields, or when needed, a face shield. Use as dust mask in dusty work conditions.

This applies to all persons in the work area. Also use non-skid safety shoes, hardhat, gloves,

dust collection systems, and hearing protection when appropriate.

• Do not overreach. Keep proper footing and balance at all times.

• Remove adjusting keys or wrenches before connecting to the power supply or turning on

the tool. A wrench or key that is left attached to a rotating part of the tool may result in

personal injury.

ROTARY TOOL USE AND CARE

• Do not modify the Rotary Tool in any way. Unauthorized modification may impair the

function and/or safety and could affect the life of the equipment. There are specific

applications for which Rotary Tool was designed.

• Always check of damaged or worn out parts before using the Rotary Tool. Broken

parts will affect the Rotary Tool operation. Replace or repair damaged or worn parts

immediately.

• Store idle Rotary Tool. When Rotary Tool is not in use, store it in a secure place out of the

reach of children. Inspect it for good working condition prior to storage and before reuse.

• Do not use accessories (such as grinding discs) with a maximum rated speed below

32,000/min.

• Always wear eye, ear and breathing protection.

• Do not apply too much pressure when grinding, cutting, etc.

• Keep your hands well clear of the cutting devices.