Wel-Bilt 1433781 Owner's Manual

10-Pc.

Multi-Purpose

Angle Ginder Set

OWNER'S MANUAL

Item # 1433781

WARNING:

Read carefully and understand all INSTRUCTIONS before

operating. Failure to follow the safety rules and other basic

safety precautions may result in serious personal injury.

INTENDED USE

This Angle Grinder Set is designed for grinding metal and removing rust by
fitting specific accessories to the unit.

TECHNICAL SPECIFICATIONS

Description Specifications

Disc Diameter: 4

1

/2 in.

Disc Bore Diameter:

7

/8 in.

Spindle Thread:

5

/8 in. x 11

No Load Speed: 11,000 RPM
Input Power: 500 Watt

1

Thank you very much for choosing a Wel-Bilt

TM

product! For future reference,

please complete the owner's record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read
the entire manual to become familiar with this product before you begin using it.

This machine is designed for certain applications only. The distributor cannot
be responsible for issues arising from modification. We strongly recommend
this machine is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application,
DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.

For technical questions please call 1-800-222-5381.

2

GENERAL SAFETY RULES

WARNING! Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.

WARNING! The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

WORK AREA

• Keep work area clean,

free of clutter and well lit. Cluttered and dark work areas can

cause accidents.

• Do not use your tool where there is a risk of causing a fire or an explosion; e.g. in
the presence of flammable liquids, gasses, or dust. Power tools create sparks, which may
ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control, so visitors should remain at a safe distance from the work area.

• Be aware of all power lines, electrical circuits, water pipes and other mechanical
hazards in your work area, particularly those hazards below the work surface hidden from
the operator's view that may be unintentionally contacted and may cause personal harm or
property damage.

• Be alert of your surroundings. Using power tools in confined work areas may put you
dangerously close to cutting tools and rotating parts.

ELECTRICAL SAFETY

WARNING! Always check to ensure the power supply corresponds to the voltage on the

rating plate.

• Do not abuse the cord. Never carry a portable tool by its power cord, or yank tool or
extension cords from the receptacle. Keep power and extension cords away from heat, oil,
sharp edges or moving parts. Replace damaged cords immediately. Damaged cords may
cause a fire and increase the risk of electric shock.

• Grounded tools must be plugged into an outlet properly installed and grounded in
accordance with all codes and ordinances. Never remove the grounding prong or modify
the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you
are in doubt as to whether the outlet is properly grounded.

• Double insulated tools are equipped with a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still doesn't fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any way.

• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and
efrigerators. There is an increase risk of electric shock if your body is grounded.

• When operating a power tool outside, use an outdoor extension cord marked “W-A” or
“W.” These cords are rated for outdoor use and reduce the risk of electric shock.

• Extension Cord Use:

A. Use only 'Listed' extension cords. If used outdoors, they must be marked “For

Outdoor Use.” Those cords having 3-prong grounding type plugs and mating
receptacles are to be used with grounded tools.

B. Replace damaged or worn cords immediately.

C. Check the name plate rating of your tool. Use of improper size or gauge of extension

cord may cause unsafe or inefficient operation of your tool. Be sure your extension
cord is rated to allow sufficient current flow to the motor. For the proper wire gauge
for your tool, see chart.

CHART FOR MINIMUM WIRE SIZE OF EXTENSION CORD:

If in doubt, use larger cord. Be sure to check voltage requirements of the tool to your

incoming power source.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.

• Do not let your fingers touch the terminals of plug when installing to or removing from
the outlet.

• Ground fault circuit interrupters. If work area is not equipped with a permanently
installed Ground Fault Circuit Interrupter outlet (GFCI), use a plug-in GFCI between power
tool or extension cord and power receptacle.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.

• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts. Air vents often cover moving parts and should be avoided.

• Use safety apparel and equipment. Use safety goggles or safety glasses with side
shields which comply with current national standards, or when needed, a face shield. Use
as dust mask in dusty work conditions. This applies to all persons in the work area. Also
use non-skid safety shoes, hardhat, gloves, dust collection systems, and hearing
protection when appropriate.

• Avoid accidental starting. Do not carry the power tool with your finger on the switch.
Ensure the switch is in the of

f position before plugging tool into power outlet. In the event
of a power failure, while a tool is being used, turn the switch off to prevent surprise starting
when power is restored.

•

Do not overreach.

Keep proper footing and balance at all times.

3