Weider WEBE19510 User Manual
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you have
questions, or if there are missing
parts, we will guarantee complete
satisfaction through direct assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Model No. WEBE19510
Serial No.
Write the serial number in the
space above for reference.
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
Serial Number Decal
USER’S MANUAL
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
Patent Pending
2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WEIDER is a registered trademark of ICON Health & Fitness, Inc.
TABLE OF CONTENTS
3
1. Read all instructions in this manual before
using the weight rack. Use the weight rack
only as described in this manual.
2. It is the responsibility of the owner to ensure
that all users of the weight rack are adequately informed of all precautions.
3. The weight rack is intended for home use
only. Do not use the weight rack in a commercial, rental, or institutional setting.
4. Use the weight rack only on a level surface.
Cover the floor beneath the weight rack to
protect the floor.
5. Make sure that all parts are properly tightened each time you use the weight rack.
Replace any worn parts immediately.
6. Keep children under 12 and pets away from
the weight rack at all times.
7. Keep hands and feet away from moving
parts.
8. Always wear athletic shoes for foot protection while exercising.
9. The weight rack is designed to support a
maximum of 300 pounds, including a barbell
and weights. Do not place more than 300
pounds, including a barbell, on the weight
rests. Do not place more than 150 pounds on
the weight carriage. Note: The weight rack
does not include a barbell or weights.
10. Always make sure that there is an equal
amount of weight on each side of the weight
carriage.
11. Always set both weight rests and both safety
spotters at the same height.
12. Always remove the lat bar when performing
an exercise that does not require the use of
the lat bar.
13. Always lower the weight carriage in a controlled manner; never let the weight carriage
drop.
14. Always move your bench out of the way
when performing an exercise that does not
use the bench.
15. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
16. The decal shown below has been placed on
the weight rack. If the decal is missing or
illegible, please call our Customer Service
Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time, to order a free replacement
decal. Apply the decal in the location shown.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the weight rack.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
IMPORTANT PRECAUTIONS
!
WARNING
• Misuse of this
product may result in
serious injury.
• Read user’s manual
and follow all warnings
and operating instructions prior to use.
• Do not allow children
on or around machine.
• Replace label if
damaged, illegible,
or removed.
4
Upright
Lat Bar
High Pulley Station
Safety Spotter
Low Pulley Station
Weight Carriage
Foot Plate
Weight Rest
Thank you for selecting the versatile WEIDER®PRO
525 weight rack. The PRO 525 is designed to help you
develop every major muscle group of the body.
Whether your goal is a shapely figure, dramatic
increase in muscle size and strength, or a healthier
cardiovascular system, the PRO 525 will help you
achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight rack. If you have additional ques-
tions, please call our Customer Service Department
toll-free at 1-800-999-3756, Monday through Friday, 6
a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please note the product model
number and serial number before calling. The model
number is WEBE19510. The serial number can be
found on a decal attached to the weight rack (see the
front cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
BEFORE YOU BEGIN
5
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 18 of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
PART IDENTIFICATION CHART
M10 x 45mm Bolt (18)
M10 Washer (15)
M8 Nylon Locknut (28)
M10 x 20mm Bolt (21)
M10 Nylon Locknut (20)
M10 x 80mm Bolt (22)
M8 x 70mm Bolt (25)
M10 x 65mm Bolt (19)
6
1. Before beginning, make sure that you understand the information in the box above. Note:
Some parts described in the assembly steps
may be pre-assembled.
Press a 60mm Square Inner Cap (11) into the
end of the Rear Base (8).
Attach the Rear Base (8) and the Foot Plate (10)
to the Base (3) with two M10 x 80mm Bolts (22)
and two M10 Nylon Locknuts (20). Do not tighten
the Nylon Locknuts yet.
2. Press two 60mm Square Inner Caps (11) into the
ends of each Stabilizer (5).
Attach the Stabilizer (5) to one end of the Base
(3) with two M10 x 80mm Bolts (22), a Support
Plate (29), and two M10 Nylon Locknuts (20). Do
not tighten the Nylon Locknuts yet.
Assemble the other Stabilizer (5) in the same
manner. Note: There is a warning decal on one
of the Stabilizers; make sure it is in the position shown.
1
22
8
20
20
11
3
10
2
22
11
20
Decal
11
22
29
3
5
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight rack, make sure all
parts are oriented as shown in the drawings.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
This manual is designed to ensure that the
weight rack can be assembled successfully by
anyone. Most people find that by setting aside
plenty of time, assembly will go smoothly.
ASSEMBLY
Loading...