Weider DRBE06010 User Manual
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if there are missing parts, we will
guarantee complete satisfaction
through direct assistance from our
factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians
on our customer hot line will provide immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
Model No. DRBE06010
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and instructions
in this manual before using this
equipment. Save this manual for
future reference.
USER’S MANUAL
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
Serial Number
Decal
Patent Pending
Table Of Contents
Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Adjusting The Body Toning System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Exercise Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Exploded Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the body toning system.
1. Read all instructions in this manual before using
the body toning system. Use the body toning
system only as described in this manual.
2. It is the responsibility of the owner to ensure that
all users of the body toning system are adequately informed of all precautions.
3. The body toning system is intended for home use
only. Do not use the body toning system in a
commercial, rental, or institutional setting.
4. Use the body toning system only on a level surface. Cover the floor beneath the body toning
system to protect the floor.
5. Inspect and tighten all parts each time you use
the body toning system. Replace any worn parts
immediately.
6. Keep children under 12 and pets away from the
body toning system at all times.
7. Always wear athletic shoes for foot protection
while exercising.
8. Keep hands and feet away from moving parts.
9. Always make sure there is an equal amount of
resistance on each side of the body toning system.
10. The body toning system is designed to support a
maximum of 250 pounds.
11. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
12. The decal shown below has been placed on the
body toning system in the location shown. If the
decal is missing, or not legible, call our Customer
Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time, to order a free replacement decal.
Apply the replacement decal in the location shown.
WARNING: Before beginning this or any exercise program, consult your physician. This is
especially important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using. ICON assumes no responsibility for personal injury or property damage sustained
by or through the use of this product.
Important Precautions
2
!
WARNING
• Misuse of this product may result in serious
injury.
• Read user’s manual and follow all warnings
and operating instructions prior to use.
• Do not allow children on or around machine.
• Replace label if damaged, illegible, or removed.
Thank you for selecting the versatile WEIDER®ROCK &
TONE body toning system. The ROCK & TONE body toning system is designed to help you develop the muscle
groups of the lower body. Whether your goal is a shapely
figure, dramatic increase in muscle size and strength, or a
healthier cardiovascular system, the ROCK & TONE body
toning system will help you achieve the specific results you
want.
For your benefit, read this manual carefully before
using the WEIDER
®
ROCK & TONE body toning sys-
tem. If you have additional questions, please call our
Customer Service Department toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please mention
the product model number (DRBE06010) and the serial
number found on a decal attached to the body toning system (see the front cover of this manual).
Before You Begin
3
Assembly
1. Press 2” Round Outer Caps (15) onto the ends of the Rear
Stabilizer (8) and the Front Stabilizer (9, not shown). Note:
The Rear Stabilizer is longer than the Front Stabilizer.
Attach the Rear Stabilizer (8) to the Base (2) with two M8 x
63mm Carriage Bolts (21) and two M8 Nylon Locknuts (22).
2. Attach the Front Stabilizer (9) to the Adjustment Frame (3)
with two M8 x 63mm Carriage Bolts (21) and two M8 Nylon
Locknuts (22).
Press the 30mm Square Inner Cap (36) into the Adjustment
Frame (3) and secure it with the M4 x 12mm Screw (35).
Insert the Adjustment Frame through the Slider Bushing (33)
and into the Base (2). Insert the Adjustment Pin (18) into the
indicated hole in the Base and through a hole in the
Adjustment Frame.
Attach the Press Plate (6) to the Adjustment Frame (3) with
two M8 x 43mm Carriage Bolts (28), two 5/16” Washers (23),
and two M8 Nylon Locknuts (22).
3. Make sure that the End Plate (11) is inside of the Angled
Cap (10). Press the Angled Cap onto the bottom of the
Backrest Frame (1). Press a 38mm Square Inner Cap (16)
into the top of the Backrest Frame.
Attach the Pivot Frame (7) to the Backrest Frame (1) with
two M8 x 52mm Button Bolts (29), two M8 Washers (23),
and two M8 Nylon Locknuts (22).
Attach the Pivot Frame (7) to the Base (2) with an M10 x
64mm Button Bolt (25) and an M10 Nylon Locknut (24). Do
not overtighten the Nylon Locknut; the Pivot Frame
must be able to pivot easily.
1
21
15
15
8
22
22
2
18
33
36
35
22
22
23
21
9
2
3
28
6
2
3
16
1
29
23
23
10
11
2
7
22
24
25
22