Weider 44XC, WESLO 44XC BIKE Owner's Manual
QUESTIONS?
As a manufacturer, we are
committed to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfaction through direct assistance
from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained technicians on our customer hot line
will provide immediate assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
Model No. WMC/WEEX30880
PATENT PENDING
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
¨
USERÕS MANUAL
Portable Cycle
2
1. It is the responsibility of the owner to ensure
that all users of the 44XC are adequately
informed of all precautions.
2. Always sit on a stable, non-moving chair
while using the 44XC. Never stand on the
44XC or it will be damaged.
3. Keep the electronic monitor out of direct
sunlight or the LCD display may be
damaged.
4. Place the 44XC on a level surface. Cover the
floor or carpet beneath the 44XC for
protection.
5. Always wear athletic shoes for foot protection when using the 44XC.
6. Keep children under the age of 12 and pets
away from the 44XC at all times.
7. Keep hands and feet away from moving
parts.
8. Inspect and tighten all parts often. Replace
any worn parts immediately.
9. Always keep your feet in the pedal straps
when using the 44XC.
10. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cooling down.
11. The 44XC is intended for home use only. Do
not use the 44XC in a commercial, rental or
institutional setting.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially
important for persons over the age of 35 or persons with pre-existing health problems. Read all
instructions before using this product. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
To reduce the risk of serious injury, read the following precautions and
all instructions in this manual before using the 44XC.
WARNING:
Important Precautions
Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using and Adjusting the 44XC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Conditioning Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Exploded Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Table of Contents
3
1. Place the Crank Assembly (6) on top of the Frame
(1) and align the holes in the mounting bracket (A)
with the holes in the Frame. Make sure the Crank
Assembly and Frame are oriented as shown, so
the Reed Switch (not shown) is on the same
side of the Frame as the Flywheel.
Insert two Crank Assembly Bolts (8) through the
rear holes in the mounting bracket (A) and the
Frame (1). Slide the Support Bracket (18) onto the
Bolts from below and hand tighten two Crank
Assembly Locknuts (9) onto the Bolts.
Align the Monitor Bracket (7) with the front holes in
the mounting bracket (A). Insert two Crank
Assembly Bolts (8) through the front holes in the
mounting bracket, the Frame (1) and the Support
Bracket (18). Tighten two Crank Assembly Locknuts
(9) onto the Bolts and then fully tighten the other
two Locknuts.
Note: The pedals have been removed from this
drawing for clarity.
1
Assembly
Place all parts in a cleared area and remove all packing materials. Do not dispose of the packing materials until
assembly is completed. Assembly requires two adjustable wrenches (not included) or a
socket set.
Thank you for selecting the innovative WEIDER 44XC.
The 44XC is designed to let you enjoy invigorating exercise in the comfort and privacy of your own home. At the
same time, the 44XC is easily portable and can be taken
virtually anywhere.
For your benefit, read this manual carefully before
using the 44XC. If you have additional questions, please
call our Customer Service Department at the number
shown on the front cover. To help us assist you, please
note the product model number before calling. The model
number is WEEX30880.
Before you begin, please familiarize yourself with the
parts that are labeled in the drawing at the right.
Before You Begin
Electronic
Monitor
Crank
Assembly
Flywheel
Pedal
Pedal
Pedal
Resistance
Knob
Frame
7
6
18
9
1
8
8
A
Reed
Switch
Flywheel
Pedals removed
for clarity
Loading...