WEG Electric CFW10 Sales Brochure
CFW10
Motors | Automation | Energy | Coatings
g
Tough
g
Reliable
Drive
Farm
Factory
Home
g
Durable
g
Quality
USACFW1009
www.weg.net
Variable Frequency Drives
CFW10
Single Phase - Three Phase Converter
The CFW10 is an economical solution to many applications on the
Farm, in the Factory and in the Home Shop. It’s a low cost solution
for operating three phase motors where only single phase power
exists. The CFW10 takes single phase 115 or 230 volt input power
and converts it to three phase 230 volts without the need for a
transformer. A simple programming keypad and a bright LED
display make the drive easy to program and operate while giving the
user flexibility to customize the operation for their needs. This
rugged drive is capable of operating in ambient temperatures up to
122°F (50°C) without derating. The CFW10 is a simple, rugged
drive that will give long lasting performance in the most extreme
conditions.
Applications
g
Pumps
g
Fans/Blowers
g
Blowers
g
Conveyors
g
Rollout tables
Standard Features
g
V/Hz control
g
IP20 finger safe enclosure
g
Single Phase 110-127V input voltage up to 1 HP
g
Single Phase 200–240V input voltage up to 3 HP
g
150% current overload capacity
g
DSP controlled PWM output
g
2.5-15 kHz adjustable switching frequency
g
Four isolated programmable digital inputs
g
Programmable relay output
g
One isolated programmable analog input
g
Diagnostic features: Over current, motor
overload, drive over temperature, output short
circuit, DC bus over and under voltage and
external fault
g
Control features: Linear and S-Ramp
acceleration and deceleration, local / remote
control, DC braking, torque boost, motor slip
compensation, electronic pot, preset speeds,
minimum and maximum adjustable frequency
limits, adjustable output current limit, JOG
g
Display readings: Motor speed, frequency,
voltage, current, last fault, heatsink temperature
and drive status
g
Ambient: 122°F (50°C), 3300 ft (1000 m) altitude,
90% humidity, non-condensing
<#>
1-800-ASK-4WEG
Loading...