WEG Electric CFW09 Sales Brochure
Shark™
Drive
Variable Frequency Drives
Shark™ Drive
The WEG SHARK™ line of Variable Frequency Drive is designed
to complement the enclosure ruggedness of WEG's SHARK™
motor product line. The all Stainless Steel NEMA 4X Enclosure is
ideal for high pressure hose washdown and corrosive environments
that are typically found in the food processing and pharmaceutical
industries. The SHARK™ Drive's complete package combination
of the CFW09's triple control capability (Volts/Her tz, Sensorless or
Closed Loop Vector) matched with the SHARK™ Drive's NEMA 4X
enclosure rating allows the SHARK™ Drive to succeed in virtually
all applications in any industrial environment.
www.weg.net
VARIABLE FREQUENCY DRIVES
Applications
g
Pumps
g
Fans/Blowers
g
Conveyors
g
Rollout tables
g
Agitators
g
Mixers
Standard Features
g
NEMA 4X All Stainless Steel Enclosure
g
V/Hz and sensorless Vector Control
g
Self Tuning
g
Single and Three-phase input voltage
g
200-240V or 380-480V input voltage
g
150% current overload capacity
g
Dynamic Braking transistor
g
32 bit RISC microprocessor
controlled PWM output
g
1.25/2.5/5/10kHz adjustable switching frequency
g
Six isolated programmable digital inputs
g
Three programmable relay outputs (250Vac/1A)
g
Two isolated programmable analog inputs
g
Two programmable analog outputs
g
Protective features: Over current, motor overload, drive over
temperature, output phase-to-phase and phase-to-ground
short circuit, DC bus over and under voltage, power supply
under voltage and phase loss and external fault
g
Control features: Linear and "S" ramp acceleration and
deceleration, local remote control, DC braking, torque boost,
motor slip compensation, electronic pot, preset speeds,
adjustable V/Hz profile, maximum and minimum adjustable
frequency limits, two skip frequencies, adjustable output
current limit, JOG, ride-thru and flying start and PID regulator
g
Display readings: Motor speed, frequency, voltage,
current and torque, output power (kW), four last faults,
drive status, digital and analog I/O status, hours powered
and hours running
g
Ambient: 32ºF (0ºC) to 104ºF (40ºC), 3300 ft (1000m)
altitude, 90% humidity, non-condensing
Optional Features
g
Closed loop vector control
RS-485 Serial Interface
g
Fieldbus Comm: Profibus DP,
DeviceNet or Modbus RTU*
g
Encoder buffered output
g
Additional digital and analog I/O
* Requires optional RS-232 or
RS-485 interface
WEG Automation - Products and Solutions
35
Loading...