ADDENDUM TO THE CFW-09
FREQUENCY INVERTER
MANUAL
SHARK NEMA 4X
Series: CFW-09
Software Version: 2.4X
Manual Number/Revision:
0899.4570 E/3
07/2003
1
8.15 CFW-09 SHARK
NEMA 4X
In applications that need a Drive with a higher protection
enclosure, the CFW-09 SHARK NEMA 4X is indicated. The NEMA
4X provides protection against dust, dirt and splashing or hosedirected water.
8.15.1 Enclosure
specifications
8.15.2 Mechanical
installation
The SHARK NEMA 4X is the CFW-09 standard with a stainless
steel enclosure. The models are:
CFW 09 0006 T 2223
CFW 09 0007 T 2223
CFW 09 0010 T 2223
CFW 09 0016 T 2223 Size 2 *
CFW 09 0003 T 3848
CFW 09 0004 T 3848
CFW 09 0005 T 3848
CFW 09 0009 T 3848
CFW 09 0013 T 3848
CFW 09 0016 T 3848
* The Shark Drive dimensions are distinct from the standard CFW -09 Drive, so, the
Sizes 1 and 2 from the Shark Drive are different from the Sizes 1 and 2 of the
standard CFW-09.
NEMA Type 4X indoors;
NEMA Type 12 indoors;
IP 56;
Other specifications are same to the standard CFW-09 and are
explained along this manual.
The Drive comes covered by a plastic film. Remove this sheet
before starting the installation.
Install the drive in an environment that does not exceed Type 4 /
4X / 12 limitations.
Install the Drive on a flat surface, in the vertical position;
External dimensions and mounting holes are according to figures 1
and 2.
Size 1 *
Size 1 *
Size 2 *
2