WEG Electric .2518ES3H56C-S Data Sheet

DATA SHEET

Three Phase Induction Motor - Squirrel Cage

Customer :

____

Product line : Rolled Steel Standard Efficiency

Three-Phase

Frame
Output
Poles
Frequency
Rated voltage
Rated current
L. R. Amperes
LRC
No load current
Rated speed
Slip
Rated torque
Locked rotor torque
Breakdown torque
Insulation class
Service factor
Moment of inertia (J)

Output 25% 50% 75% 100% Foundation loads

Efficiency (%) 54.4 57.5 66.0 70.0
Power Factor 0.24 0.43 0.54 0.62 Max. compression : 31 lb

Bearing type : 6203 ZZ 6202 ZZ
Sealing : V'Ring V'Ring
Lubrication interval : - ­Lubricant amount : - ­Lubricant type : Mobil Polyrex EM

: 56C
: 0.25 HP (0.18 kW)
: 4
: 60 Hz
: 575 V
: 0.417 A
: 2.63 A
: 6.3x(Code M)
: 0.360 A
: 1765 rpm
: 1.94 %
: 0.744 ft.lb
: 240 %
: 300 %
: F
: 1.15
: 0.0453 sq.ft.lb

Max. traction : 12 lb

Drive end Non drive end

Product code : 14796866

Catalog # : .2518ES3H56C-S

Locked rotor time
Temperature rise
Duty cycle
Ambient temperature
Altitude
Protection degree
Cooling method
Mounting
Rotation¹
Noise level²
Starting method
Approx. weight³

: 68s (cold) 38s (hot)
: 80 K
: Cont.(S1)
: -20°C to +40°C
: 1000 m.a.s.l.
: IP55
: IC411 - TEFC
: F-1
: Both (CW and CCW)
: 52.0 dB(A)
: Direct On Line
: 19.1 lb

Notes

This revision replaces and cancel the previous one, which
must be eliminated.
(1) Looking the motor from the shaft end.
(2) Measured at 1m and with tolerance of +3dB(A).
(3) Approximate weight subject to changes after
manufacturing process.
(4) At 100% of full load.

These are average values based on tests with sinusoidal
power supply, subject to the tolerances stipulated in NEMA
MG-1.

Rev. Changes Summary Performed Checked Date

Performed by

Checked by Page Revision

Date 13/10/2020

This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.

Subject to change without notice

1 / 1