WEG Electric 01089EP3QCT256V2-W22 Data Sheet

DATA SHEET
Three Phase Induction Motor - Squirrel Cage
Customer : Customer reference :
____
Product line : W22 Cooling Tower High Efficiency
Three-Phase
Frame Insulation class Duty cycle Ambient temperature Altitude Protection Degree Design
Output HP 10 2.5 Poles 4 8 Frequency [Hz] 60 60 Rated voltage [V] 460 460 Rated current (A) 13.0 4.80 L. R. Amperes (A) 93.6 24.0 LRC (A) 7.2x(Code J) 5.0x(Code J) No load current (A) 4.50 3.00 Rated speed [RPM] 1770 880 Slip [%] 1.67 2.22 Rated torque 29.3 14.7 Locked rotor torque [%] 180 220 Breakdown torque [%] 240 250 Service factor 1.25 1.25 Temperature rise 80 K 80 K Locked rotor time 30s (cold) 17s (hot) 36s (cold) 20s (hot) Noise Level² 64.0 dB(A) 54.0 dB(A)
25%
Efficiency (%)
Power Factor
Bearing type : 6309
Sealing : V'Ring V'Ring Max. compression : 338 lb Lubrication interval : - ­Grease amount : - ­Grease type : Mobil Polyrex EM
50% 86.5 64.0 75% 88.5 72.0
100% 89.5 74.0
25% 50% 0.65 0.43 75% 0.75 0.56
100% 0.81 0.65
: 254/6T : F : Cont.(S1) : -20°C to 40°C : 1000 m.a.s.l. : IP55 : A
Drive end Non drive end Foundation loads
6209
2RS C3
2RS C3
Cooling method Mounting Rotation¹ Starting method Approx. weight³ Moment of inertia (J)
Max. traction : 14 lb
Product code : 12173030
Catalog # : 01089EP3QCT256V2-W22
: IC411 - TEFC : F-2 : Both (CW and CCW) : Direct On Line : 325 lb : 2.96 sq.ft.lb
Notes
This revision replaces and cancel the previous one, which must be eliminated. (1) Looking the motor from the shaft end. (2) Measured at 1m and with tolerance of +3dB(A). (3) Approximate weight subject to changes after manufacturing process. (4) At 100% of full load.
Rev. Changes Summary Performed Checked Date
Performed by
Checked by Page Revision
Date 21/04/2017
This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.
Subject to change without notice
These are average values based on tests with sinusoidal power supply, subject to the tolerances stipulated in NEMA MG-1
DATA SHEET
Three Phase Induction Motor - Squirrel Cage
Customer : Customer reference :
Space heater information
Voltage: 110-127/200-240 V
____
Rev. Changes Summary Performed Checked Date
Performed by
Checked by Page Revision
Date 21/04/2017
This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.
Subject to change without notice
TORQUE AND CURRENT VS SPEED CURVE
Three Phase Induction Motor - Squirrel Cage
Customer : Customer reference :
Product line : W22 Cooling Tower High Efficiency
Three-Phase
Product code : 12173030
Catalog # : 01089EP3QCT256V2-W22
____
Performance : 460 V 60 Hz 4P
Rated current : 13.0 A Moment of inertia (J) : 2.96 sq.ft.lb LRC : 7.2 Duty cycle : Cont.(S1) Rated torque : 29.3 ft.lb Insulation class : F Locked rotor torque : 180 % Service factor : 1.25 Breakdown torque : 240 % Temperature rise : 80 K Rated speed : 1770 rpm Design : A
Locked rotor time : 30s (cold) 17s (hot)
Rev. Changes Summary Performed Checked Date
Performed by
Checked by Page Revision
Date 21/04/2017
This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.
Subject to change without notice
TORQUE AND CURRENT VS SPEED CURVE
Three Phase Induction Motor - Squirrel Cage
Customer : Customer reference :
Product line : W22 Cooling Tower High Efficiency
Three-Phase
Product code : 12173030
Catalog # : 01089EP3QCT256V2-W22
Performance : 460 V 60 Hz 8P
Rated current : 4.80 A Moment of inertia (J) : 2.96 sq.ft.lb LRC : 5.0 Duty cycle : Cont.(S1) Rated torque : 14.7 ft.lb Insulation class : F Locked rotor torque : 220 % Service factor : 1.25 Breakdown torque : 250 % Temperature rise : 80 K Rated speed : 880 rpm Design : A
____
Locked rotor time : 36s (cold) 20s (hot)
Rev. Changes Summary Performed Checked Date
Performed by
Checked by Page Revision
Date 21/04/2017
This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.
Subject to change without notice
Loading...
+ 8 hidden pages