DATA SHEET
Three Phase Induction Motor - Squirrel Cage
Customer :
Product line : Rolled Steel Three-Phase Product code : 13484635
Catalog # : 00336ET3E56-S
____
Frame
Output
Poles
Frequency
Rated voltage
Rated current
L. R. Amperes
LRC
No load current
Rated speed
Slip
Rated torque
Locked rotor torque
Breakdown torque
Insulation class
Service factor
Moment of inertia (J)
Design
Output 25% 50% 75% 100% Foundation loads
Efficiency (%) 83.6 84.0 86.5 86.5
Power Factor 0.51 0.78 0.87 0.91 Max. compression : 191 lb
Bearing type : 6204 ZZ 6202 ZZ
Sealing : V'Ring V'Ring
Lubrication interval : - Lubricant amount : - Lubricant type : Mobil Polyrex EM
: 56H
: 3 HP (2.2 kW)
: 2
: 60 Hz
: 230/460 V
: 7.02/3.51 A
: 66.7/33.3 A
: 9.5x(Code K)
: 2.56/1.28 A
: 3500 rpm
: 2.78 %
: 4.50 ft.lb
: 300 %
: 380 %
: F
: 1.15
: 0.1663 sq.ft.lb
: B
Drive end Non drive end
Locked rotor time
Temperature rise
Duty cycle
Ambient temperature
Altitude
Protection degree
Cooling method
Mounting
Rotation¹
Noise level²
Starting method
Approx. weight³
Max. traction : 142 lb
: 18s (cold) 10s (hot)
: 80 K
: Cont.(S1)
: -20°C to +40°C
: 1000 m.a.s.l.
: IP55
: IC411 - TEFC
: F-1
: Both (CW and CCW)
: 68.0 dB(A)
: Direct On Line
: 48.8 lb
Notes
USABLE @208V 7.76A SF 1.00 SFA 7.76A
This revision replaces and cancel the previous one, which
must be eliminated.
(1) Looking the motor from the shaft end.
(2) Measured at 1m and with tolerance of +3dB(A).
(3) Approximate weight subject to changes after
manufacturing process.
(4) At 100% of full load.
These are average values based on tests with sinusoidal
power supply, subject to the tolerances stipulated in NEMA
MG-1.
Rev. Changes Summary Performed Checked Date
Performed by
Checked by Page Revision
Date 13/08/2020
This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization of WEG S/A.
Subject to change without notice
1 / 1