Operating instructions
Chilled Water Marine Air-Conditioning Systems
BlueCool V-Series
EN
Valid for BlueCool V50 M as of change index C (2017 ->):
Typ: V50 M: WBCL1203001C ->
Valid for BlueCool V77 T / V64 T, as of change index B (2017 ->):
Typ: V64 T: WBCL1203003B & V77 T: WBCL1203002B
2
1 About this document
1.1 Purpose of the document
This operating instructions are part of the product and provides the user with information on
the safe operation of the unit.
1.2 Using this document
Before operating the unit, read this operating
instruction and the supplementary sheet "Important Information on Operating and Installation Instructions".
Keep these operating instructions ready to
hand.
Hand these operating instructions on to the
following owner or user of the unit.
1.3 Use of symbols and highlighting
WARNING
Type and source of the risk
Result: non-observance can
lead to severe or mortal inju-
ries.
Actions to protect yourself
against risks.
CAUTION
Type and source of the risk
Result: non-observance leads to
property damage.
Actions to protect yourself
against risks.
Note on a special technical feature
Disregard can result in damage to
the system or its surroundings.
Highlight Explanation
3
Requirements for the following necessary action
Necessary action
1.4 Warranty and liability
Webasto shall not assume liability for defects or
damage that are the result that the installation
and operating instructions as well as the instructions contained therein being disregarded.
This liability exclusion particularly applies for:
improper use
repairs not carried out by a Webasto service
workshop
use of non-genuine parts
conversion of the unit without permission
from Webasto
2 Safety
2.1 Intended use
The BlueCool V-Series is approved only for installation in ships.
2.2 Regulations and safety instructions
Regulations on the supplementary sheet "Important Information on Operating and Installation Instructions" must be observed.
2.3 Safety precautions
WARNING
Ignition of surrounding gases or
highly flammable liquids by
sparking of the air-conditioning
system!
Danger of fire and explosion of
ship or of petrol station.
The air-conditioning systems
must ALWAYS be switched off
during refuelling or while in a
petrol station area.
3
3 Description
The BlueCool MyTouch is the standard control
element for the BlueCool V-Series and enables
easy operation and setting of the connected
system. The screen is designed as a touch
screen. System operation is described in the following.
CAUTION
Damage to BlueCool MyTouch
■
The screen should not come in
contact with any other electrical
devices as electrostatic discharge could cause malfunctions.
■
Do not use pointed or sharp objects to operate the screen and
do not exert excessive pressure
with your fingers.
Note
■
It is recommended to operate
the screen with your fingers.
The touch sensitivity of the
screen is optimised to direct
contact with the fingers. The
screen may not respond to
touch if gloves are worn.
■
Tapping outside the touch-sensitive area at the edge of the
screen may not be recognised.
4 Home screen and sym-
bols
There is a choice of 3 different designs of the
Home screen with temperature and fan setting.
The functions are the same.
To change the design (in settings menu ) see
“9.1 Selecting Settings menu” on page6.
Air handlers are connected to the chiller unit
If air handlers are connected to the chiller unit,
the Home screen displays the temperature and
air handler settings. In such cases, using the
MyTouch control element, the chiller unit and
the temperature in the cab can be controlled.
Fig. 1
A
1
2
3
5
6
4
Design 1
Fig. 2
1
2
3
5
6
4
A
Design 2
4
Fig. 3
1
2
3
5
6
4
A
Design 3
The illustrations show examples of design 1 to
3.
1 Home screen
2 Temperature setting
3 ON/OFF
4 Fan display
5 Display of automatic fan control
6 Settings
The symbols on the Home screen provide information on the system status. The symbols are
explained in the table:
Symbol Meaning
1 On/Off
2
Temperature
3
Fan
4
Settings
6
Notification
7
Increase values
8
Decrease values
9
AUTO
Automatic fan control
10
previous
11 22 Setpoint temperature
12
previous
13
Forward
14
Parameter value
15
Select
16
Home screen
17
Scroll up
18
Scroll down
21
Keypad
22
Display selection
Fig. 4 Meaning of symbols
Loading...