VI - PRODUCT SPECIFICATION .............................................................................................. 28
- 3 -
INTRODUCTION
First of all, thank you very much for purchasing WayteQ product!
Please read this manual carefully before using this product.
This company will continue to provide new functions for the development of the product,
and there will be no separate change in the case of any change in the product’s
performance and functions.
If the actual setup and the application methods are not identical to those as set forth in
this manual, please access to the latest product information of our web site.
I - GETTING STARTED
Important Safety Precautions
Always follow these basic safety precautions when using your Personal Touch Tablet.
This will reduce the risk of fire, electric shock and injury.
Warning: To reduce the risk of fire of shock hazard, do not expose this product to rain
or water.
Warning: To prevent the risk of electric shock, do not remove the cover. There are no
user-serviceable parts inside. Opening will void your warranty.
Unplug the Personal Touch Tablet before performing maintenance.
Keep your Personal Touch Tablet out of direct sunlight and heat sources.
Protect the power cord. Route power cords so that they are not likely to be
walked on or pinched by items placed on or against them. Pay particular
attention to the point where the power cord is attached to the Personal Touch
Tablet.
Only use the AC adapter included with the Personal Touch Tablet. Using any
other power adapter will void your warranty.
Unplug the power cord from the outlet when the unit is not in charging condition.
- 4 -
Cleaning the Panel
Treat the screen gently. The screen is made of glass and can be scratched or broken.
To clean fingerprints or dust from the screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the screen.
If you use a commercial Cleaning Kit, do not apply the cleaning liquid directly to the
screen. Clean the screen with cleaning cloth moistened with the liquid.
Cleaning the Personal Touch Tablet
Clean the outer surface of the Personal Touch Tablet (excluding the screen) with a soft
cloth dampened with water.
Features
Welcome to the Personal Touch Tablet! The Personal Touch Tablet includes these key
features:
● Displays Alarm, AppInstaller, Browser, Calculator, Calendar, Camera, Clock, Email,
File Browser, Gallery, HDMI Switch, Music, Setting, Video Player and etc
● Displays digital photos, Play Music and Video
● Wi-Fi function to connect with your AP router for internet browsing
● Micro Secure Digital™ (micro SD) slot for external storage
● Capacitive touch screen for all user operations
● 4GB Internal Memory
● USB2.0 OTG for connection to the PC or USB flash drive
- 5 -
Buttons Overview
Accessories
Power Adapter (depending on the regional requirement, the
plug may look different)
USB Cable
- 6 -
What’s in the Box
WayteQ xPAD-70 Personal Touch Tablet
AC Power Adapter (5V/2A)
USB Cable
Quick Start Guide
Charging the Battery
Plug the AC power adapter into the Personal Touch Tablet and into a wall outlet.
Icon will be turn flashing with charging sign while the battery is charging.
When charging is completed, the battery icon will turn into a steady green.
* It is strongly recommended you fully charge the device for about 4-6 hours before use.
Power on/off and Unlock Personal Touch Tablet
The Personal Touch Tablet is easy to set up. Just follow these steps:
1. To power on the device, press and hold Power button for 3 seconds to turn on tablet.
2. Wait until a screen with a lock and speaker icon show up, gently tap the “Lock” icon
and slide it toward the speaker icon to unlock tablet.
3. To power off the device, press and hold the Power button for 2 seconds until a MID
options message show up on screen where you can choose Power off option to power
off the device.
Note: The screen with the lock icon will time out in 10 seconds if you do not unlock it. In
case it happens, the Power button can be pressed briefly to make it show up again.
- 7 -
II - FUNCTIONNING OF THE TABLET
Navigation
Tablet has five home screens by default. You can tailor shortcuts or widgets to home
screen to fit your needs by using Add to Home screen function. For more information,
refer to “Create Shortcuts on Home Screen” on page 15.
Home Screen
A typical Home screen with wallpaper, status bar, and few applications at the bottom.
◆ A shortcut to browser
◆ A shortcut to application Launcher screen.
◆ A shortcut to system Settings
- 8 -
Icon
Action
On any functional screen, tap this icon to go to Home screen
Shows the status of micro SD (this icon shows micro SD is
removed.)
Wi-Fi connection and signal strength
Battery level. Will turn orange when battery is low and turn red
when battery is very low.
Indicates alarm clock is turned on
Current time
Volume down
Volume up
On any functional screen, tap this icon to go back one screen or
exit application.
Tap this icon to open a contextual menu screen. The available
options will vary, depending on what application is running on the
screen.
Application Launcher Screen
A typical application Launcher screen is shown below. One icon represents one
application which can be run by tapping on the icon.
Status Bar
On the top corner of the screen, the status bar mainly indicates Home icon, Wi-Fi status,
battery level, current time and volume, etc.
- 9 -
Onscreen Keyboard
The onscreen keyboard appears automatically anytime you tap on a text line for input.
While entering text with the onscreen keyboard, each character will be entered into the
position pointed by a vertical cursor. You can change the cursor position by tapping with
your finger on the position you want to enter the next character. To select different
language keyboard, touch and hold the onscreen key . A pop menu will show
up to let you select the “Input Method”
*Setting up an International keyboard: see “Install Third-Part Applications from micro
SD” section.
- 10 -
III - SETTINGS
Set Up Wi-Fi Connection
Make Wi-Fi Connection In Settings Wireless & networks Wi-Fi Settings, check on
the Wi-Fi to turn on the Wi-Fi.
Normally, the device will automatically scan the available Wi-Fi Access Point (AP). If this
does not happen, press Menu (upper right corner icon in the Status bar) and select
Scan to scan for the available Wi-Fi APs. Then, tap on the desired AP to make the
connection. If it is a secured AP, system will prompt you for the password. Enter it by
tapping on the password entry line, and use the onscreen keyboard to enter the
password. Then, tap on the Connect to start connecting to that AP.
When connection is established, the Wi-Fi connected icon will show up on the
status bar.
- 11 -
Set Date and Time
Use Settings Data & Time to open up the data/time setting screen as shown below.
Select the correct time zone. If the Wi-Fi is connected to Internet, check on the
Automatic to have time set up automatically. If Wi-Fi is not connected to Internet,
uncheck Automatic to temporarily set date and time. Then, check Automatic again
before leaving the screen. In the future, when the Wi-Fi is connected to internet, date
and time will be automatically adjusted.
- 12 -
Icon
Action
Refresh
Tap to enter E-mail compose interface
Tap to enter mailbox interface
Tap to enter your accounts viewing
To remove your account record in tablet, touch and hold
your account address >Tap Remove account.
Account settings
Set Up Email
You can configure Email for most accounts in just a few steps. For many popular email
services, tablet automatically enters most of the settings for you.
1. Make sure the Wi-Fi is connected.
2. Open the Email application and enter your Email address and password, then tap
“Next”
3. Give a name to your account then tap “Done”. Mail messages will be downloaded
automatically.
Tap to show function bar at the bottom of the screen
- 13 -
Icon
Action
Show all schedules sorted by Day
Show all schedules sorted by Week
Show all schedules sorted by Month
Show all schedules sorted by specific Agenda
Show all schedules sorted by today
Show more options: New event \ Calendars \ Settings
Set Up Calendar
Calendar makes you easy to stay on schedule. You can view your schedule by day,
week, and month.
When using calendar for the first time, there are some steps you shall follow:
1. Tap Calendar icon into Gmail entering interface, then enter your Gmail account and
password and tap Next.
2. Erase “\” icon in front of your Domain\Username.
3. Change the Serve “gmail.com” for “m.google.com”, then tap next step.
In Account options, you can adjust: Email checking frequency and Amount to
synchronize and so on.
Tap on the specific date to start using your personal calendar now.
Tap to show function bar at the bottom of the screen.
- 14 -
Create Shortcuts on Home Screen
In order to access to frequently used applications more quickly, you can create a short
cut to an application and place it on the Home screen. Therefore, you don’t need to
spend to look for it among the many applications on the Launcher screen.
There are two ways to make shortcuts:
1. Tap any blank space on Home screen and hold until a pop out menu shows up. Then,
you can select Shortcuts to add to the Home screen.
2. Press the application icon in the Launcher screen and hold until the icon is enlarged
and background has been changed to Home screen. Then, drag the enlarged icon to an
empty space on Home screen and release the finger.
Create Widgets on Home Screen
Widget is a small application. After being installed, it does not show up in the Application
Launcher screen. However, using the same method as creating shortcuts on Home
screen, widgets can be put on the Home screen, and be launched by tapping on the
widget icon.
- 15 -
Change Wallpapers
In Add to Home screen menu tap Wallpapers, then a submenu shows up. You can
select wallpaper from your Gallery/ Live wallpapers/ default Wallpapers.
Install Third-Part Applications from micro SD
AppInstaller can be used to install the application file (with extension apk) into the
system.
1. Change the Settings to allow third-party application installation. In Settings
Applications Unknown sources, check the box to the right.
2. Prepare the application files in a micro SD card and insert the micro SD card.
3. Launch the AppInstaller application on the application launcher screen. The system
will scan for the installation files in the SD. Find the application you want to install from
the list and tap on it. The installation process will start. Follow the screen instruction to
complete the installation.
- 16 -
IV - CONNECTIONS
Wi-Fi
This tablet uses the 802.11b/g/n wireless specification to transmit and receive data. For
more information, refer to “Set up Wi-Fi Connection” on page 11.
Bluetooth
Bluetooth is a short-range communications technology that enables you to link to other
devices for exchanging information without a physical connection.
Make Bluetooth Connection In Settings Wireless & networks Bluetooth, check on
the Bluetooth to turn it on. Iconwill display when Bluetooth is active.
Normally, the device will automatically scan the available Bluetooth devices. If this does
not happen, tap Scan for devices for the available Bluetooth device. Then, tap on the
desired device for a while to show Pair & connect, and enter a PIN to pair with this
Bluetooth to make the connection. Tap on the OK to start connecting to that Bluetooth.
When connection is established, you may start exchanging information now.
*Insert a TF card before storing information.
- 17 -
PC Connection
Connect your tablet to a PC via USB cable. By connecting tablet to PC, you can
synchronies files or transfer data directly.
1. Plug one end of a USB cable to a tablet and plug the other end to a PC, then you will
see a screen as below. Tap Turn on USB storage to connect to PC.
2. For a better use of your tablet, tap Turn off USB storage every time you unmount USB
storage.
- 18 -
Connect to TV set
HDMI switch can switch your video display from tablet to a TV or monitor with HDMI
input. While the tablet screen is shown on TV or monitor, tablet will become a touch pad
for all operations, including switching video display back to the tablet screen.
To switch the video display from the tablet screen to a TV or Monitor equipped with
HDMI input
1. Plug one end (larger end) of the HDMI cable into one of the TV/monitor HDMI
inputs, and plug the other end to tablet HDMI output.
2. Choose the correct input source setting on TV/monitor. Wait until the HDMI
iconshows up on the status bar, and indicates “HDMI connected”.
3. Open the HDMI Switch application. Tap on a compatible video format the
TV/monitor can accept. If you don’t know which one to use, the best guess is to
tap on the 720p (or 480p for older HD Ready TV).
4. Wait for a few seconds, the tablet video will show up on the TV/monitor screen.
5. Slide your finger on the tablet screen to move an arrow to the OK button, and
double tap the tablet screen to apply the selection.
6. From this moment on, until your use the HDMI Switch application to switch the
video back to tablet screen or disconnect the HDMI cable, you can use the
following gestures to perform all the operations.
Finger move - move arrow cursor on the TV/monitor
Double tap - select/open the item pointed by the arrow
Double tap and quick move – slide the screen, scroll a list or move the tapped
icon.
Double tap and hold -- equivalent to the long press of an item when video
display is on the tablet screen.
7. To switch back to the normal video on the tablet screen, simply unplug the HDMI
cable
- 19 -
Icon
Action
Exposure \ Picture size \ Picture quality \ Color effect \ Camera settings
submenu
White balance submenu for different light environment
Zoom submenu
Video recording mode
Photo mode
Tap to take picture or start video recording. Photo or video will be saved in the
micro SD card automatically. After photo is taken or recording, tap the square
icon on upper-right corner of the screen to review.
V - APPLICATIONS
Camera
Tablet allows you to take photos and video through the front camera. You can take
photos at resolution up to 800 x 600 pixel (0.3 megapixels) and videos at resolution up
to 354 x 288 pixels. The application requires external micro SD card to run. The picture
taken and video recorded will be store in the external micro SD card. Be sure to insert
the micro SD before using this application.
To take picture:
Make sure mode switch is set to , the photo mode.
Tap on the shutter button to take a picture.
To record video:
Make sure mode switch is set to , the video recording mode.
Tap on the Recording button to start video recording.
- 20 -
Icon
Action
Adjust alarm clock
Play photo slideshow of internet memory or micro SD
Play music
Exit to Home screen
Adjust panel brightness
Clock
Tap on clock icon. The following screen will be shown. You can tap on the icon at the
bottom screen to adjust alarm settings, play photo slideshow, play music or go back to
Home screen.
The icon at the upper-right corner can be used to adjust the brightness of the panel.
Tap Menu button at the right-upper corner to display additional functions at the
bottom of the screen: Set alarms, Add alarm or Set the docking (not available now).
- 21 -
Browser
Browser is used for browsing the World Wide Web. With the web browser plug-ins, you
could browse websites to watch videos, download contents, and listen to music etc.
1. Tap the address field (in the title bar) to bring up the onscreen keyboard, enter
website address, then tap Go.
2. Similar website previously browsed or key work previous searched will appear
beneath the address field. You can tap them to go to the web site listed or search the
key word.
3. Double tap on screen to zoom in and zoom out. Moving fingers across the screen will
pan the screen up, down, left or right.
Tap Menu button at the right-upper corner to display additional functions at the
bottom of the screen.
- 22 -
Icon
Action
Clear history of calculation
Show advanced panel
Calculator
To perform mathematical calculation directly on tablet by tap numbers and symbols.
Tap to show function bar at the bottom of the screen
- 23 -
Icon
Action
Tap to start sliding photos
Go to more options
Share photos by Bluetooth or Email
Delete photo
Go to more options: Details of photo/ Set as wallpaper/ Crop
photo/ Rotate option: Right/ Left
Gallery
Tap on “Gallery” in Launcher screen to open the application.
1. The first screen shows all photos and subfolders located in the Pictures folder.
2. Tap Pictures folder into photo thumbnail mode. (Default view)
3. Tap a thumbnail into photo single view mode.
4. When in photo single view mode, tap anywhere on screen to show function bar on
screen.
- 24 -
Icon
Action
Show playing list
Turn shuffle on/off function
/
Repeating all songs, current song or Off
Previous song
Pause/ Stop
Next song
Music
Tap “Music” in the application launcher screen to get to the song screen as below:
Select the song, album, artist or playlist to play music. Use the onscreen icons to
configure how you want to play the songs.
Note: Song will keep playing as background music while you leave the music playback
screen. This function allows you to browse files, view photos and surf Internet while
listening to music. To stop playing songs, tap on Pause on the music playing screen
followed by the Back button.
Tap on status bar to select other functions to play the song.
- 25 -
Icon
Action
Back to previous menu
Move to previous video
Fast reverse
Play/Pause
Fast forward
Move to next video
Show more options
Video Player
1. Tap “Video Player” in the application launcher screen.
2. Browse the micro SD or internal memory to find the video file to play.
3. Tap video file to start playing video.
4. While playing video file, tap anywhere on screen to display the control bar as below.
Drag the yellow bar to fast forward or backward view video.
- 26 -
Icon
Action
Back icon
Resume Mode
Repeat all or Repeat one
Audio Track
Subtitle
Adjust the size of screen display format:
Normal/ Full Screen/ 4:3 / 16:9
Adjust screen brightness: 1/2/3/4
Back to Device List interface
Multiple select / open mode
Edit file: Cut/Copy/ Paste/Delete
Sort file: Sort by name/ Sort by date/ Sort by size
Back icon
Change between thumbnail mode and list mode interface
Help mode
Close FileBrowser
Additional options in the control bar are:
File Browser
In main screen, tap FileBrowser to choose your options first: Internal Memory / SD Card.