Wayne-Dalton 451, 452 User Manual
A L U M I N U M F U L L V I E W
451& 452
W A Y N E - D A L T O N C O M M E R C I A L D O O R S Y S T E M S
ALUMINUM FULL-VIEW
SECTIONAL DOOR SYSTEMS
WHEN VISIBILITY AND LIGHT TRANSMISSION ARE KEY
Wayne-Dalton’s Aluminum Full-View doors are the preferred
choice when visibility and light transmission are just as important
as aesthetics. Aluminum Full View sectional doors are weatherresistant and virtually maintenance-free, and are ideal for
commercial applications such as service stations, car washes, and
auto dealerships.
• MAXIMIZES LIGHT
AND VISIBILITY
• CHOOSE FROM DSB GLASS,
ACRYLIC, POLYCARBONATE
THICK PLATE GLASS, OR
INSULATED GLASS PANELS
• STANDARD SIZES UP TO
16'2" WIDE AND 16'1" HIGH
SECTIONAL DOOR SYSTEMS
ALUMINUM FULL-VIEW 451 & 452
Perfectly suited for applications where maximum
light and visibility are desired, Wayne-Dalton’s
Aluminum Full-View doors help create a pleasant
interior environment while offering a warm and open
look from the exterior. Aluminum Full-View doors
feature an aluminum bottom section with three to
seven clear upper sections, depending upon size.
Model 451
Glazed with
1
/8" DSB glass held in place with
aluminum molding and sealed with butyl glazing tape,
the Aluminum Full-View 451 is ideal for applications
up to 16'2" x 16'1". Acrylic (plexiglass) or polycarbonate
(lexan) panels, in thicknesses of
1
/8" and1/4" can be
substituted for DSB glass.
Model 452
Ideal for larger installations and applications where
insulation and durability are important,theAluminum
Full-View 452 features
place with aluminum molding and sealed with butyl
glazing tape. Alternative glazing options include
1
/2" insulated SSB glass, held in
1
/4"
thick plate and wire polished glass.
Materials & Construction
Aluminum Full-View doors are manufactured using
high-quality materials for excellent durability. All
stiles and rails are extruded aluminum alloy 6063T6
and feature a beveled edge around panels. Stiles and
rails can be clear anodized (standard) or finished with
white or brown powder coat finish. Tracks and
hardware are manufactured from hot-dipped
galvanized steel, and the doors feature vinyl seals
between sections and on the bottom of the door.
Large glass
allow
panels
maximum light
& visibility.
Vinyl seal
between
sections.
Aluminum
glazing stop.
2-1⁄4" integrated reinforcing
rib
intermediate rail
for doors 10'3"
wide and over.
1- 3⁄8" thick
section
with special
reinforcing design.
on upper
Contact Wayne-Dalton for additional sizes and
colors.
Finishes
• Clear Satin Anodized (standard)
• BronzeAnodized
• Black Anodized
• White/Brown Acrylic
Choice of colors
204-R1 clear satin anodized finish.
• Custom Powder Coat
www.wayne-dalton.com/commercial
6063-T6 aluminum alloy,
Flexible vinyl
Durable smooth aluminum panels
(color matches rail, glass in bottom section
not recommended).
bottom door seal.
Loading...