Waveshare USB TO RS232/485/TTL User Manual

Download

USB TO RS232/485/TTL User Manual

Version：V1.3，Date：20181108 1 / 13

USB TO RS232/485/TTL

User Manual

Overview

This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL

inside. It features embedded protection circuits such as power isolation, ADI magnetical

isolation, and TVS diode, etc. What's more, the USB TO RS232/485/TTL comes with an

aluminium alloy enclosure, make it solid and durable to work.

The USB TO RS232/485/TTL is very easy to use, fully automatic transceiving without

delay. Due to its fast communication, stability, reliability, and safety, it is an ideal choice

for industrial control equipments and/or applications with high communication

requirement.

Features

⚫ USB TO RS232, USB TO RS485, USB TO TTL (UART)

⚫ Adopt original FT232RL, fast communicating, stable and reliable, better

compatibility

⚫ Onboard unibody power supply isolation, provides stable isolated voltage, needs

no extra power supply for the isolated terminal

⚫ Onboard unibody magnetical isolation, allows signal isolation, high reliability,

strong anti-interference, low power consumption

USB TO RS232/485/TTL User Manual

Version：V1.3，Date：20181108 2 / 13

⚫ Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage

and transient spike voltage in the circuit, lightning-proof & anti-electrostatic

⚫ Onboard self-recovery fuse and protection diodes, ensures the current/voltage

stable outputs, provides over-current/over-voltage proof, improves shock

resistance

⚫ Fully automatic transceiver circuit with no delay, ensures the USB port

communicates with different interfaces fastly and stably, without interfering each

other

⚫ Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch

⚫ Aluminium alloy enclosure with sand blasting and anodic oxidation, CNC process

opening, solid and durable

⚫ 3 LEDs for indicating the power and transceiver status

⚫ High quality USB-B and RS232 connectors, smoothly plug/pul

Specifications

⚫ Product type: industrial optically isolated converter

⚫ Baudrate: 300-921600bps

⚫ Host port: USB

⚫ Device port: RS485/RS232/TTL

⚫ USB:

◼ Operating voltage: 5V

◼ Connector: USB-B

◼ Protection: 200mA self-recovery fuse, isolated output

USB TO RS232/485/TTL User Manual

Version：V1.3，Date：20181108 3 / 13

◼ Transmission distance: ~5m

⚫ RS485:

◼ Connector: screw terminal

◼ Pins: A+, B-, GND

◼ Direction control: hardware automatic control

◼ Protection: 600W lightning-proof and surge-suppress, 15KV ESD protection

(reserved 120R balancing resistor solder pads)

◼ Transmission distance: ~1200m

◼ Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended

to use repeaters for 16 nodes or more)

⚫ RS232:

◼ Connector: DR9 male

◼ Protection: TVS diode, surge protection, ESD protection

◼ Transmission distance: ~15m

◼ Transmission mode: point-to-point

⚫ TTL (UART):

◼ Operating voltage: 3.3V/5V

◼ Connector: screw terminal

◼ Pins: TXD, RXD, GND

◼ Protection: clamp protection diode, over-voltage/negative-voltage proof,

shock resistance

◼ Transmission mode: point-to-point

USB TO RS232/485/TTL User Manual

Version：V1.3，Date：20181108 4 / 13

⚫ LED indicators:

◼ PWR: red power indicator, light up when there is USB connection and voltage

is detected

◼ TXD: green TX indicator, light up when the USB port sends data

◼ RXD: blue RX indicator, light up when the device ports send data back

⚫ Operating environment:

◼ Temperature: -15℃ ~ 70℃

◼ Humidity: 5%RH ~ 95%RH

⚫ Operating system: Windows 10 / 8.1 / 8 / 7 / XP

Note: There is a pad reserved for 120R balancing resistance. Recommend you to weld

120Ω resistors to the first and last devices if you connect many devices at the same

time.

USB TO RS232/485/TTL User Manual

Version：V1.3，Date：20181108 5 / 13

CONECTENT

Overview....................................................................................................................................................... 1

Features ................................................................................................................................................ 1

Specifications ..................................................................................................................................... 2

Driver Installation ...................................................................................................................................... 6

Testing ........................................................................................................................................................ 10

Interfaces ........................................................................................................................................... 10

RS232 .................................................................................................................................................. 10

RS485 .................................................................................................................................................. 11

TTL ........................................................................................................................................................ 12