Waveshare RS232, RS485 User Manual

RS232 TO RS485 User Manual
RS232 TO RS485
User Manual

Int r oduction

This is a RS232 vs RS485 asynchronous bidirectional convertor, which features electromagnet
isolation. The internal TVS bidirectional transient suppression diode and detonator to protect the
Revision: V1.0, Date20200620
1
RS232 TO RS485 User Manual

Con t ent

Introduction
Content
About product
Features
...............................................................................................................................................
......................................................................................................................................................
............................................................................................................................................
...........................................................................................................................................
Specification
Interfaces
.......................................................................................................................................
Pinout of Interfaces
Indicators
Dimensions
Hardware testing
.......................................................................................................................................
.......................................................................................................................................
.......................................................................................................................................
Preparation
.................................................................................................................................
...................................................................................................................
.............................................................................................................................
1
2
3
3
3
5
5
6
7
8
8
Hardware connection
.............................................................................................................
8
Revision: V1.0, Date20200620
2
RS232 TO RS485 User Manual

Ab o ut pr o duct

Fea t u r e s

Compatible with RS232/RS485 standard, it can convert RS232 signal to balanced difference RS485
signal.
Stable transmitting rate, supports baudrate 300~115200bps
Integrate unibody power supply isolation, stable isolated voltage is provided, need no extra
power supply for the isolated terminal
Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong
anti-interference, low power consumption
Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong
anti-interference, low power consumption
Onboard unibody magnetical isolation, allows signal isolation, high reliability, strong
anti-interference, low power consumption
Onboard 120R terminal resistor, it is switchable for easy using.
DC-005 power interface supports 6V~36V wide-range DC voltage for different applications
3 LESs for indicating the power and transceiver status.
Aluminium alloy enclosure the with sand blasting and anodic oxidation, solid and durable.

Spe c i f i c a t i o n

Product type: Electromagnetic isolation RS232 to RS485 asynchronous bidirectional convertor
Baud rate: 300~115200bps
Device interface: standard RS232/RS485
RS232 interface:
Connector: DB9 male
Transmitting range: about 15 meters
Transmitting type: Point-to-Point
RS485 interface:
Connector: DIP connector + RJ45 port
Direction control: Hardware auto-controlling
Interface protection: 600W lightning protection, over-current and 15KV ESD protection
Terminal resistor: 120R, switchable
Transmitting range: about 1200 meters
Transmitting type: Point-to-Omnipoint (Support up to 32 points, Relay is recommend if you
use more than 16 points)
Indicators:
Revision: V1.0, Date20200620
3
RS232 TO RS485 User Manual
PWR : Power indicator, turns red when power supply is connected
TXD: Transmit indicator, turns green when data is transmitted from RS232 port.
RXD: Receive indictor, turns blue when data is received by RS232 port
Environment:
Temperature: -15℃~70
Humidity: 5%RH~95%RH
Note: The switch on board is used to enable/disable the 120R terminal resistor. The terminal resistor
is recommend for the Start and End devices.
Revision: V1.0, Date20200620
4
RS232 TO RS485 User Manual

Int e r f a c e s

Pin o u t of In t erfaces

Revision: V1.0, Date20200620
5
RS232 TO RS485 User Manual

Ind i c a t o r s

Revision: V1.0, Date20200620
6
RS232 TO RS485 User Manual

Dim e n s i o n s

Revision: V1.0, Date20200620
7
RS232 TO RS485 User Manual

Har d ware testing

Pre p a r a t i o n

Environment:Windows PC
Devices required
RS232 TO RS485
USB TO RS485
Host PC (if your PC does not has RS232 port, you can purchase an USB to RS232 cable (mal port)
separately)

Har d w a r e connection

Connect the RS232 port of RS232 TO RS485 to PC by extend cable or USB to RS232 cable. Connect the
RS485 port of RS232 TO RS485 to the ES485 port of USB TO RS485. Connect the USB port of USB TO
RS485 to PC for loopback testing as figure below.
Revision: V1.0, Date20200620
8
RS232 TO RS485 User Manual
Open two SSCOM software on host PC. Select the correct serial port and set their baud rate to the
same, check the SendEvery option. Then you can test if the devices can transmit and receive normally.
Revision: V1.0, Date20200620
9
Loading...