Page 1
Watts®ROs with Kwik-Change™ Cartridges
Simply the “best” of the “best”!
nternal valve shuts-off flow during cartridge
I
and membrane replacement.
C
artridges have double o-rings
to prevent leakage.
Hinge bracket for easy cartridge
removal and replacement.
Cartridge replacement is so easy,
you or the homeowner can do it!
roprietary filter cartridges and
P
membranes are installed and
emoved by a simple 1/4 turn.
r
WQA Gold Seal
Certified to
NSF / ANSI
Std. 58
Watts®Kwik-Change™ Systems are designed for consumers that
demand the "best". Unlike conventional reverse omosis systems,
Watts drinking water systems with Kwik-Change cartridges have
no sumps, so their proprietary filter elements and membranes are
easy to replace.
Full Product Line Available, Including:
50 Gpd Models • 100 Gpd Models • Metal Tanks
Plastic Tanks • op Mount Faucets • Standard Faucets
Models For Coolers • Custom Systems
Drinking Water Systems With Filter Elements
& Hollow Fiber Membranes.
®
Watts
top mount
faucets
are mounted
from above the
counter top.
Long reach
chrome faucet.
Standard with
all models
listed on
reverse.
Features & Benefits
• Cartridges are connected and
removed with a simple 1/4 turn.
• No filter sumps! No fuss! No mess!
• Automatic shut-off when cartridges are removed.
• Tank and faucet options available.
• Valves are built into the heads to prevent
back-flow for water quality assurance.
• WQA Gold Seal Certified to NSF/ANSI Std. 58.
Metal
storage tank
RO Pro®
Storage Tanks
Only 9” wide, takes
less space and wonʼt
chip,rust or dent!
Page 2
Watts® Kwik-Change RO systems are so easy to service
you'll get great quality water every time!
Conventional RO Systems
Conventional RO systems may provide high quality water.
However, cartridges and membranes are difficult to replace
because they are installed in housings and must be removed.
This procedure includes the need to shut off and drain down
the system, open the housings with a wrench, remove
catridges, empty water from the sumps, clean the filter and
membrane housings, replace cartridges, re-pressurize, and
check for leaks.
VS.
• Hinge bracket for easy handling.
• Automatic shut off when cartridges are removed
with a simple, 1/4 turn.
• No need to disconnect tubing when replacing membranes.
• Integrated check valves between cartridges and
Kwik-Change RO System
No Sumps! No Mess! No Fuss!
membrane prevent back-flow.
Because conventional systems are difficult to service, routine
maintenance may be delayed. Therefore, consumers may not
get the quality water they desire, unless a qualified dealer is
called to service their system.
• Cartridges have double o-rings so they will not leak.
• Quick connect fittings for easy installation.
Models
MODEL NUMBER STAGE
WQC4RO11-50PT 4 50 11" Top mount RO-PRO®
WQC4RO11-50MT 4 50 11" Top mount Metal
WQC4RO11-50MTLR 4 50 11” Long Reach Metal
WQC4RO13-100PT 4 100 13" Top mount RO-PRO®
WQC4RO13-100MT 4 100 13" Top mount Metal
WQC4RO13-100MTRL 4 100 13" Long Reach Metal
Note: All models listed above use 3/8" tubing from unit to tank to faucet. All models come with designer, top mount air gap faucets.
CAPACITY
(GPM)
Replacement elements
SIZE
ELEMENTS
FAUCET TANK
MODEL ELEMENT SEDIMENT CARBON MEMBRANE
50 GPD System 11" WQCSC11 WQCCC11 WQCM11-50 WQCGAC11
100 GPD System 13" WQCSC13 WQCCC13 WQCM13-100 WQCGAC13
GGAACC
Watts Water Quality & Conditioning Products
800-659-8400 (press 2 for sales)
Email: wqp@watts.com
watts.com
SS-WQP-KWCHG-0839
© Watts 2008
Loading...