Watts WPC1FF975 User Manual
Watts®Pleated Cartridges
Greater surface area, longer l i fe,
reduced filtration costs!
Watts pleated cartridges outperform wound, spun, melt
blown, resin bonded and other “depth” style filter elements
because our pleated cartridges provide increased surface
area, lower pressure drop and longer service life. Our
100% synthetic media is washable and cleanable, five
micron and up, to reduce filtration costs.
Features
Filter media is pleated
Cellulose-FREE, 100% synthetic media
Wide range of lengths and micron ratings
Individually wrapped for purity
Washable and reusable, 5 micron and up
Color-coded end caps (2-3/4” OD)
New lower list price
Not all pleated cartridges perform the same!
“Ours”
Benefits
U Greater dirt holding capacity; more surface area;
lower initial pressure drop; higher flow rates;
longer life; reduced filtration costs.
U Superior performance with no additives or binders to break
down which may cause foaming and filter degradation.
U Full product line to satisfy your application.
U Additional security at no additional charge.
U Reduce filter replacement costs.
U Easily identify standard OD replacements.
U Reduced filter costs for higher profits.
“Theirs”
Watts, cellulose-free, 100% synthetic filter media
allows the pleats to retain their form, maintaining a
large amount of surface area. This allows the cartridge to handle higher solids loading and flow rates
with a lower pressure drop that increases the filter
efficiency and life, while reducing filter change out
costs and frequency.
The difference is the media!
VS.
The cellulose blended pleats collapsed on one
another, blinding off large amounts of the
cartridges surface area. Premature blinding of the
surface area reduces the flow capacity and efficiency while raising the differential pressure, and
contributing to shorter filter life and frequent filter
change outs.
Standard 2-3/4” OD X 9-3/4” length
PRODUCT CODE MEDIA TYPE MICRON COLOR CASE / QTY
PC1-975
W
WPC5-975 Synthetic 5 White 50
WPC20-975 Synthetic 20 Blue 50
WPC50-975 Synthetic 50 Yellow 50
ynthetic
S
1 T
an
0
5
Standard 2-3/4” OD X 20” length
PRODUCT CODE MEDIA TYPE MICRON COLOR CASE / QTY
WPC1-20 Synthetic 1 Tan 25
WPC5-20 Synthetic 5 White 25
WPC20-20 Synthetic 20 Blue 25
PC50-20
W
ynthetic
S
0
5
ellow
Y
5
2
Standard 2-3/4” OD X 29-1/4” length
PRODUCT CODE MEDIA TYPE MICRON COLOR CASE / QTY
WPC1-2925 Synthetic 1 Tan 25
WPC5-2925 Synthetic 5 White 25
WPC20-2925 Synthetic 20 Blue 25
WPC50-2925 Synthetic 50 Yellow 25
Standard 2-3/4” OD X 40” length
PRODUCT CODE MEDIA TYPE MICRON COLOR CASE / QTY
WPC1-40 Synthetic 1 Tan 25
WPC5-40 Synthetic 5 White 25
WPC20-40 Synthetic 20 Blue 25
WPC50-40 Synthetic 50 Yellow 25
Identify cartridges
easily with color
coded end caps
1 - Micron
5 - Micron
Full-Flow (B-B) 4-1/2” OD X 9-3/4” length
PRODUCT CODE MEDIA TYPE MICRON COLOR CASE / QTY
WPC1FF975 Synthetic 1 Embossed Blue 18
WPC5FF975 Synthetic 5 Embossed Blue 18
WPC20FF975 Synthetic 20 Embossed Blue 18
WPC50FF975 Synthetic 50 Embossed Blue 18
20 - Micron
Full-Flow (B-B) 4-1/2” OD X 20” length
PRODUCT CODE MEDIA TYPE MICRON COLOR CASE / QTY
WPC1FF20
WPC5FF20 Synthetic 5 Embossed Blue 9
WPC20FF20 Synthetic 20 Embossed Blue 9
WPC50FF20 Synthetic 50 Embossed Blue 9
Maximum flow rate guidelines for Watts Cartridges
MICRON RATING
(NOMINAL) 9-3/4” 20” 29-1/4” 9-3/4” 20”
1 Micron
5 Micron 7 14 21 15 25
20 Micron 8 16 24 15 25
50 Micron 10 20 30 15 25
Watts pleated specifications
Maximum temperature 140°F (60°C)
Minimum temperature 40°F (4.4°C)
Maximum pressure 40 psid
Recommended change out 25 psid
Filter media (1 & 5 micron) Polypropylene
Filter media (20 & 50 micron) Polyester
Material - center tube Polypropylene
Material - end caps Molded Polyurethane
ID 1-1/6”
Synthetic 1 Embossed Blue 9
STANDARD CARTRIDGES (2-3/4” OD)
4 8 12 15 25
Washable and reusable
Watts pleated cartridges are washable and reusable, five micron
and up to reduce filtration costs. For best results, direct spray
into the pleats to dislodge the sediment.
Distributed by:
50 - Micron
FULL-FLOW (B-B)
Watts Water Quality & Conditioning Products
800-461-4406 (press 2 for sales)
Email: wqp@watts.com
watts.com
© Watts 2008
SS-WQP-PCART-0840
Loading...