Watts WP8S User Manual

For Residential and Commercial Applications
ES-WP-BrassCouplings
Job Name
Job Location
Engineer
Approval
Brass CrimpRing & CinchClamp
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Couplings
Brass CrimpRing™& CinchClamp™Couplings and Coupling Kits are used for making WaterPEX uing a run as well as transitioning from polybutylene pipe to WaterPEX
®
tubing.
Specifications
System shall be plumbed using Watts WaterPEX®cross-linked polyethylene pipe, and all joints shall be made using Watts brass CrimpRing either the Watts copper CrimpRing CinchClamp WaterPEX
and/or polyalloy CrimpRing™fittings using
* crimping methods as outlined in the Watts
®
Installation Guidelines.
®
repairs in the field, contin-
or stainless steel
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
PEX x PEX CrimpRing™Coupling
PEX x PEX CinchClamp
(Each kit contains 4 CinchClamps™and 2 brass couplings)
WP15
WP8S
Coupling Kit
Installation Note
Brass Couplings must be installed in accordance with all Watts WaterPEX provided in WaterPEX
®
installation procedures, including information
®
installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for Testing and Materials (ASTM) F-877 and F-1807
• Listed by the National Sanitation Foundation to NSF Standards 14 and 61 for use in potable water systems
• Listed by NSF to be in compliant to the Uniform Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the CSA Standards B137.5
* Note: Watts WaterPEX CinchClamp™fittings should not be
used with wrot copper PEX fittings.
Warning!
If connections must be made in temperatures below 30°F, caution must be taken to allow the WaterPEX to form a proper seal against the barb. Apply the connection slowly to ensure the PEX material conforms to the barb.
WP16
(Each kit contains 4 copper CrimpRings™and 2 brass couplings)
(Each kit contains 2 copper CrimpRings™and one PB coupling)
PEX x PEX CrimpRing
PEX x PB Trasition Coupling Kit
Coupling Kit
WP17
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with­out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions – WeightsDimensions – Weights
MODEL INLET OUTLET PKG. WEIGHT
PEX CrimpRing Couplings
WP15B-0606PB WP15B-0806PB WP15B-0808PB WP15B-1208PB WP15B-1212PB WP15B-1612PB 1 25 Crimp Fitting WP15B-1616PB 1 25 Crimp Fitting 1 25 Crimp Fitting 3 1.4 WP15B-2020PB 11⁄4 32 Crimp Fitting 11⁄4 32 Crimp Fitting 3 1.4 WP15B-1620PB 1 25 Crimp Fitting 11⁄4 32 Crimp Fitting 3 1.4
PEX x PEX CinchClamp Coupling Kits
WP8S-6 WP8S-8 WP8S-14 WP8S-16 1 25 PEX 1 25 PEX 1 0.4
PEX x PEX CrimpRing Coupling Kits
WP16B-06 WP16B-08 WP16B-12 WP16B-16 1 25 PEX 1 25 PEX 1 0.4 WP16B-20 11⁄4 32 PEX 11⁄4 32 PEX 1 0.4
PEX x PB Transition Coupling Kits
WP17B-06 WP17B-08 WP17B-12 WP17B-16 1 25 PEX 1 25 PB 1 0.4
in. mm type in. mm type lbs. kgs.
3
8 10 Crimp Fitting
1
2 15 Crimp Fitting
1
2 15 Crimp Fitting
3
4 20 Crimp Fitting
3
4 20 Crimp Fitting
3
8 10 PEX
1
2 15 PEX
3
4 20 PEX
3
8 10 PEX
1
2 15 PEX
3
4 20 PEX
3
8 10 PEX
1
2 15 PEX
3
4 20 PEX
3
8 10 Crimp Fitting 1 0.4
3
8 10 Crimp Fitting 1 0.4
1
2 15 Crimp Fitting 1 0.4
1
2 15 Crimp Fitting 2 0.9
3
4 20 Crimp Fitting 2 0.9
3
4 20 Crimp Fitting 3 1.4
3
8 10 PEX 1 0.4
1
2 15 PEX 1 0.4
3
4 20 PEX 1 0.4
3
8 10 PEX 1 0.4
1
2 15 PEX 1 0.4
3
4 20 PEX 1 0.4
3
8 10 PB 1 0.4
1
2 15 PB 1 0.4
3
4 20 PB 1 0.4
WaterPEX Plumbing Products
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
ES-WP-BrassCouplings 0711 © Watts, 2007
Loading...