Watts WP23B User Manual
For Residential and Commercial Applications
ES-WP-BrassElbows
Job Name
Job Location
Engineer
Approval
Brass CrimpRing
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
™
Elbows
Brass CrimpRing™Elbows are used to make a 90º change
between WaterPEX
threaded pipe.
Specifications
System shall be plumbed using Watts WaterPEX®cross-linked
polyethylene pipe. All joints shall be made using Watts brass
CrimpRing
the Watts copper CrimpRing
crimping methods as outlined in the Watts WaterPEX
Installation Guidelines.
™
Installation Note
CrimpRing™Elbows must be installed in accordance with all
Watts WaterPEX
provided in WaterPEX
Approvals
®
pipe or between WaterPEX®pipe and
and/or polyalloy CrimpRing™fittings using either
®
installation procedures, including information
™
or stainless steel CinchClamp™*
®
installation manual and guidelines.
®
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
WP19
Crimp x Crimp
WP20
Crimp x MPT
• Manufactured in accordance with American Society for
Testing and Materials (ASTM) F-877 and F-1807
• Listed by the National Sanitation Foundation to NSF
Standards 14 and 61 for use in potable water systems
• Listed by NSF to be in compliant to the Uniform Plumbing
Code
• Labeled B137.5 which indicates that it is compliant to the
CSA Standards B137.5
* Note: Watts WaterPEX CinchClamp™fittings should not be
used with wrot copper PEX fittings.
Warning!
If connections must be made in temperatures below 30°F,
caution must be taken to allow the WaterPEX to form a proper
seal against the barb. Apply the connection slowly to ensure
the PEX material conforms to the barb.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
CrimpRing™ x Sweat Elbows
WP23
WP21
WP22
Drop Ear Elbows
Dimensions – Weights
MODEL INLET OUTLET PKG. WEIGHT
in. mm type in. mm type lbs. kgs.
CrimpRing Elbows — Crimp x Crimp
WP19B-06PB
WP19B-08PB
WP19B-1208PB
WP19B-1212PB
WP19B-16PB 1 25 Crimp Fitting 1 25 Crimp Fitting 2 0.9
WP19B-20PB 11⁄4 32 Crimp Fitting 11⁄4 32 Crimp Fitting 3 1.4
Elbows — Crimp x MPT
WP20B-0806PB
WP20B-0808PB
WP20B-0812PB
WP20B-12PB
Elbows — CrimpRing x Sweat
WP21B-0812PB
WP21B-12PB
Drop Ear Elbows — 2 Eared
WP22B-0608PB (2-eared)3⁄8 10 Crimp Fitting
WP22B-08PB (2-eared)
WP22B-1208PB (2-eared)3⁄4 20 Crimp Fitting
WP22B-12PB (2-eared)
Drop Ear Elbows — 3 Eared
WP23B-08PB (3-eared)
3
⁄8 10 Crimp Fitting
1
⁄2 15 Crimp Fitting
3
⁄4 20 Crimp Fitting
3
⁄4 20 Crimp Fitting
1
⁄2 15 Crimp Fitting
1
⁄2 15 Crimp Fitting
1
⁄2 15 Crimp Fitting
3
⁄4 20 Crimp Fitting
1
⁄2 15 Crimp Fitting
3
⁄4 20 Crimp Fitting
1
⁄2 15 Crimp Fitting
3
⁄4 20 Crimp Fitting
1
⁄2 15 Crimp Fitting
3
⁄8 10 Crimp Fitting 1 0.4
1
⁄2 15 Crimp Fitting 1 0.4
1
⁄2 20 Crimp Fitting 2 0.9
3
⁄4 20 Crimp Fitting 2 0.9
3
⁄8 10 MPT 1 0.4
1
⁄2 15 MPT 1 0.4
3
⁄4 20 MPT 2 0.9
3
⁄4 20 MPT 2 0.9
3
⁄4 20 Sweat 3 1.4
3
⁄4 20 Sweat 3 1.4
1
⁄2 15 FPT 1 0.4
1
⁄2 15 FPT 1 0.4
1
⁄2 15 FPT 2 0.9
3
⁄4 20 FPT 3 1.4
1
⁄2 15 FPT 2 0.9
WaterPEX Plumbing Products
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
ES-WP-BrassElbows 0711 © Watts, 2007
Loading...