Watts WP18P-16PB User Manual

For Residential and Commercial Applications
ES-WP-PATees
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Poly-Alloy
CrimpRing
Poly-Alloy CrimpRing™ Tees are used for making directional changes in potable systems.
System shall be plumbed using Watts WaterPEX® cross-linked polyethylene pipe, and all joints shall be made using Watts brass CrimpRing either the Watts copper CrimpRing CinchClamp WaterPEX
and/or poly-alloy CrimpRing™ fittings using
** crimping methods as outlined in the Watts
®
Installation Guidelines.
Tees
or stainless steel
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
WP18P
CrimpRing™ Tee
Installation Note
CrimpRing™ Tees must be installed in accordance with all Watts WaterPEX ed in WaterPEX
®
installation procedures, including information provid-
®
installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for Testing and Materials (ASTM) F-877 and F-2159
• Listed by the National Sanitation Foundation to NSF Standards 14 and 61 for use in potable water systems
• Listed by NSF to be in compliant to the Uniform Plumbing Code
• Labeled B137.5 which indicates that it is compliant to the CSA Standards B137.5
• Manufactured from Acudel
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of lead by weight.
** Note: Watts WaterPEX CinchClamp™ fittings should not be used
with wrot copper PEX fittings.
®
engineered thermoplastic resin.
War n i n g!
If connections must be made in temperatures below 30°F, caution must be taken to allow the WaterPEX to form a proper seal against the barb. Apply the connection slowly to ensure the PEX material conforms to the barb.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with­out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions – Weights
Run
1
Run
2
Branch
3
MODEL 1 2 3 PKG. WEIGHT
in. mm type in. mm type in. mm type lbs. kgs.
WP18P-08PB WP18P-080812PB 1⁄2 15 Crimp Fitting 1⁄2 15 Crimp Fitting WP18P-120808PB 3⁄4 20 Crimp Fitting 1⁄2 15 Crimp Fitting WP18P-120812PB 3⁄4 20 Crimp Fitting 1⁄2 15 Crimp Fitting WP18P-121208PB 3⁄4 20 Crimp Fitting 3⁄4 20 Crimp Fitting WP18P-12PB WP18P-121216PB 3⁄4 20 Crimp Fitting 3⁄4 20 Crimp Fitting 1 25 Crimp Fitting 3 1.4 WP18P-161212PB 1 25 Crimp Fitting 3⁄4 20 Crimp Fitting WP18P-161608PB 1 25 Crimp Fitting 1 25 Crimp Fitting WP18P-161612PB 1 25 Crimp Fitting 1 25 Crimp Fitting WP18P-16PB 1 25 Crimp Fitting 1 25 Crimp Fitting 1 25 Crimp Fitting 3 1.4
1
2 15 Crimp Fitting 1⁄2 15 Crimp Fitting
3
4 20 Crimp Fitting 3⁄4 20 Crimp Fitting
1
2 15 Crimp Fitting 1 0.4
3
4 20 Crimp Fitting 1 0.4
1
2 15 Crimp Fitting 1 0.4
3
4 20 Crimp Fitting 2 0.9
1
2 15 Crimp Fitting 2 0.9
3
4 20 Crimp Fitting 2 0.9
3
4 20 Crimp Fitting 3 1.4
1
2 15 Crimp Fitting 3 1.4
3
4 20 Crimp Fitting 3 1.4
A Watts Water Te chn olo gie s Compan y
ES-WP-PATees 1020
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
© 2010 Watts
Loading...