Watts WP15P-16PB User Manual
For Residential and Commercial Applications
ES-WP-PA-Couplings
Job Name
Job Location
Engineer
Approval
LEAD FREE
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
*
Poly-Alloy CrimpRing
& CinchClamp
™
Couplings
Poly-Alloy CrimpRing™ & CinchClamp™ Couplings and Coupling
Kits are used for making WaterPEX
ing a run as well as transitioning from polybutylene pipe to
WaterPEX
®
tubing.
Specifications
System shall be plumbed using Watts WaterPEX® cross-linked
polyethylene pipe, and all joints shall be made using Watts
brass CrimpRing
either the Watts copper CrimpRing
CinchClamp
WaterPEX
™
and/or poly-alloy CrimpRing™ fittings using
™
** crimping methods as outlined in the Watts
®
Installation Guidelines.
®
repairs in the field, continu-
™
or stainless steel
Contractor
Approval
Contractor’s P.O. No.
Representative
™
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
WP15P
PEX x PEX CrimpRing™ Coupling
Installation Note
Brass Couplings must be installed in accordance with all Watts
WaterPEX
ed in WaterPEX
®
installation procedures, including information provid-
®
installation manual and guidelines.
Approvals
• Manufactured in accordance with American Society for
Testing and Materials (ASTM) F-877 and F-2159
• Listed by the National Sanitation Foundation to NSF
Standards 14 and 61 for use in potable water systems
• Listed by NSF to be in compliant to the Uniform Plumbing
Code
• Labeled B137.5 which indicates that it is compliant to the
CSA Standards B137.5
• Manufactured from Acudel
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
** Note: Watts WaterPEX CinchClamp™ fittings should not be used
with wrot copper PEX fittings.
®
engineered thermoplastic resin.
War n i n g!
If connections must be made in temperatures below 30°F,
caution must be taken to allow the WaterPEX to form a proper
seal against the barb. Apply the connection slowly to ensure
the PEX material conforms to the barb.
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions – WeightsDimensions – Weights
MODEL INLET OUTLET PKG. WEIGHT
in. mm type in. mm type lbs. kgs.
PEX CrimpRing Couplings
WP15P-0808PB
WP15P-1208PB
WP15P-1212PB
1
⁄2 15 Crimp Fitting
3
⁄4 20 Crimp Fitting
3
⁄4 20 Crimp Fitting
WP15P-1612PB 1 25 Crimp Fitting
WP15P-1616PB 1 25 Crimp Fitting 1 25 Crimp Fitting 3 1.4
WP15P-2020PB 11⁄4 32 Crimp Fitting 11⁄4 32 Crimp Fitting 3 1.4
WP15P-1620PB 1 25 Crimp Fitting 11⁄4 32 Crimp Fitting 3 1.4
1
⁄2 15 Crimp Fitting 1 0.4
1
⁄2 15 Crimp Fitting 2 0.9
3
⁄4 20 Crimp Fitting 2 0.9
3
⁄4 20 Crimp Fitting 3 1.4
A Watts Water Te chn olo gie s Compan y
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
ES-WP-PA-Couplings 1020 © 2010 Watts
Loading...