For Residential and Commercial Applications
ES-WP-BrassAdapters
Job Name
Job Location
Engineer
Approval
Brass CrimpRing
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
™
Adapters
Brass CrimpRing™Sweat Adapters are used to transition
copper pipe to WaterPEX
are used for the appropriate NPT fitting.
Specifications
System shall be plumbed using Watts WaterPEX®cross-linked
polyethylene pipe. All joints shall be made using Watts brass
CrimpRing
the Watts copper CrimpRing
crimping methods as outlined in the Watts WaterPEX
Installation Guidelines.
™
and/or polyalloy CrimpRing™fittings using either
Installation Note
CrimpRing™Adapters must be installed in accordance with all
Watts WaterPEX
provided in WaterPEX
®
®
supply lines. Threaded Adapters
™
or stainless steel CinchClamp™*
installation procedures, including information
®
installation manual and guidelines.
®
Contractor
Approval
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––
WP10
Male Sweat x Crimp
Adapter
WP11
Female Sweat x Crimp
Adapter
Approvals
• Manufactured in accordance with American Society for
Testing and Materials (ASTM) F-877 and F-1807
• Listed by the National Sanitation Foundation to NSF
Standards 14 and 61 for use in potable water systems
• Listed by NSF to be in compliant to the Uniform Plumbing
Code
• Labeled B137.5 which indicates that it is compliant to the
CSA Standards B137.5
* Note: Watts WaterPEX CinchClamp™fittings should not be
used with wrot copper PEX fittings.
Warning!
If connections must be made in temperatures below 30°F,
caution must be taken to allow the WaterPEX to form a proper
seal against the barb. Apply the connection slowly to ensure
the PEX material conforms to the barb.
WP13
Crimp x FPT Threaded
Adapter
WP12
Crimp x MPT Threaded
Adapter
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Dimensions – Weights
MODEL INLET OUTLET PKG. WEIGHT
CrimpRing™Sweat Adapters — Male x Crimp
WP10B-0806PB
WP10B-0808PB
WP10B-1212PB
WP10B-1616PB 1 25 Male Sweat 1 25 Crimp Fitting 2 0.9
WP10B-1620PB 1 25 Male Sweat 11⁄4 32 Crimp Fitting 3 1.4
WP10B-2020PB 11⁄4 32 Male Sweat 11⁄4 32 Crimp Fitting 4 1.8
CrimpRing™Sweat Adapters — Female x Crimp
WP11B-0808PB1⁄2 15 Female Sweat
WP11B-1212PB3⁄4 20 Female Sweat
WP11B-1616PB 1 25 Female Sweat 1 25 Crimp Fitting 3 1.4
WP11B-1620PB 1 25 Female Sweat 11⁄4 32 Crimp Fitting 3 1.4
WP11B-2020PB 11⁄4 32 Female Sweat 11⁄4 32 Crimp Fitting 4 1.8
CrimpRing™Threaded Adapters — Crimp x Male
WP12B-0608PB3⁄8 10 Crimp Fitting
WP12B-0808PB1⁄2 15 Crimp Fitting
WP12B-0812PB1⁄2 15 Crimp Fitting
WP12B-1208PB3⁄4 20 Crimp Fitting
WP12B-1212PB3⁄4 20 Crimp Fitting
WP12B-1216PB3⁄4 20 Crimp Fitting 1 25 MPT 3 1.4
WP12B-1612PB 1 25 Crimp Fitting
WP12B-1616PB 1 25 Crimp Fitting 1 25 MPT 3 1.4
WP12B-2016PB 11⁄4 32 Crimp Fitting 1 25 MPT 3 1.4
WP12B-2020PB 11⁄4 32 Crimp Fitting 11⁄4 32 MPT 2 .9
WP12B-20M20CPB 11⁄4 32 MPT 11⁄4 32 Crimp Fitting 4 1.8
CrimpRing™Threaded Adapters — Crimp x Female
WP13B-0808PB1⁄2 15 Crimp Fitting
WP13B-1212PB3⁄4 20 Crimp Fitting
WP13B-20F20CPB 11⁄4 32 FPT 11⁄4 32 Crimp Fitting 4 1.8
in. mm type in. mm type lbs. kgs.
1
⁄2 15 Male Sweat
1
⁄2 15 Male Sweat
3
⁄4 20 Male Sweat
3
⁄8 10 Crimp Fitting 1 0.5
1
⁄2 15 Crimp Fitting 1 0.5
3
⁄4 20 Crimp Fitting 1 0.5
1
⁄2 15 Crimp Fitting 1 0.5
3
⁄4 20 Crimp Fitting 2 0.9
1
⁄2 15 MPT 1 0.5
1
⁄2 15 MPT 1 0.5
3
⁄4 20 MPT 2 0.9
1
⁄2 15 MPT 1 0.5
3
⁄4 20 MPT 2 0.9
3
⁄4 20 MPT 3 1.4
1
⁄2 15 FPT 1 0.5
3
⁄4 20 FPT 2 0.9
WaterPEX Plumbing Products
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
ES-WP-BrassAdapters 0711 © Watts, 2007